C#

FirstPrevNext

Re: Abstract, Interface, and Attribute Heath Stewart8-Jan-04 12:11 Heath Stewart 8-Jan-04 12:11  All compilers targeting the CLR using pure managed code produce Intermediate Language, or IL. So yes, it is IL. In fact, the Managed C++ compiler is the only compiler publicly available from Microsoft that can produce native code in an assembly (known as mixed mode). But using an loop for serialization would be a poor idea. Recursion is most likely at work since for every Type that is added to the SerializationInfo, it has to be serialized, and then their Types, and so on so forth.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: Abstract, Interface, and Attribute bnieland8-Jan-04 6:50 bnieland 8-Jan-04 6:50  By decorating your class with the Serializable attribute you are just telling other classes that you pass it to that it is "auto-serializable", by which it is meant that it contains no volatile references (i.e. a SQLConnection object) or references to other classes that are not serializable. This way a remoting object (for example) knows that it does not need any special instructions to serialize/deserialize. DTrent Re: Abstract, Interface, and Attribute TuringTest18-Jan-04 7:46 TuringTest1 8-Jan-04 7:46  i hadn't thought about the volatile references, thanks! ________________________________________ Gosh, it would be awful pleas'n, to reason out the reason, for things I can't explain. Then perhaps I'd deserve ya, and be even worthy of ya.. if I only had a brain! Quoted-Printable Decoder 7-Jan-04 18:33 7-Jan-04 18:33  I was working on POP3 mail application. I'm able to implement the POP3 protocol and get the mails and attachments.. etc. But i'm unable to decode some of the mails encoded by Quoted-Printable Content-Transfer-Encoding. Please help ASAP. Re: Quoted-Printable Decoder Heath Stewart7-Jan-04 19:00 Heath Stewart 7-Jan-04 19:00  If you're looking for the rules for decoding quoted-printable encodings, see RFC 1521: http://www.ietf.org/rfc/rfc1521.txt, section 5.1. When you say you're unable to decode, is there some specific problem or are you just having problems with the rules required for decoding? The link above should help.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: Quoted-Printable Decoder Blue Tender7-Jan-04 19:23 Blue Tender 7-Jan-04 19:23  Thanks Heath for your reply. But.... I needed the code in C# for decoding Quoted-Printable text. Re: Quoted-Printable Decoder Heath Stewart8-Jan-04 3:57 Heath Stewart 8-Jan-04 3:57  Right, and there doesn't appear to be any examples you can use. There is one commercial ASP.NET emailing package that uses it but they didn't give any details. Hence the RFC link - it isn't hard to do, so you should be able to figure it out. Mostly, it's just replacing certain characters with their hexidecimal equivalents prefixed by an equal sign. Use a StringBuilder for optimal performance. Replace the characters as necessary and break the lines into 76 character sequences taking into account whether tabs or spaces must follow on the next line. There was only one example in C# I could find, and if my German is any good, it seems to have problems in a couple cases. I tried tranlating the page, but apparently it was pretty bad grammar to start off with and the translation didn't do very well: http://www.mail-archive.com/csharp.net@glengamoi.com/msg00571.html[^].   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) sxbyl7-Jan-04 17:14 sxbyl 7-Jan-04 17:14  If I host the SingleCall SAOs in IIS, I can use HttpContext.Current to get current HttpContext in the calling method, so I can get some useful information. But if I host the remote objects in a console application for debug, HttpContext.Current is a null object. Can I get some object likes HttpContext when I do not host the objects in IIS in the calling method? I’ d not like to use CallContext cross Internet. Best Regards! Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) Heath Stewart7-Jan-04 18:48 Heath Stewart 7-Jan-04 18:48  HttpContext has no context outside of ASP.NET. It is tightly coupled, therefore not usable outside the context of ASP.NET. You might consider designing your SAO to be a little more abstract and leave the details of what is required (say, a response Stream) to the host.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) sxbyl7-Jan-04 19:00 sxbyl 7-Jan-04 19:00  Thank for your comment. I only need some way to distinguish clients in my SingleCall objects, but I'd not like to pass the client id in all class methods, or to pass the id in CallContext. Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) Heath Stewart7-Jan-04 19:03 Heath Stewart 7-Jan-04 19:03  Define "client ID". We use a lot of remoting in our application and deal with lots of stuff like that. I just need to understand your circumstances. Is it unique to a machine (perhaps an IP address)? A user identity? A client application version or client name (like a user agent for browsers)?   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) sxbyl7-Jan-04 19:18 sxbyl 7-Jan-04 19:18  In my software, I only need to distinguish sessions in the method calls. So I can generate a GUID in the client. But how can I passed to the server in SingleCall objects? Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) Heath Stewart8-Jan-04 3:44 Heath Stewart 8-Jan-04 3:44  Well, there's always the CallContext, which you said you didn't want to use but this is a good purpose for it. What's wrong with it? It's just another part of the remoting infrastructure. Both creating your own RealProxy and adding a channel sink could possibly do this, but it's a lot more work and not easily accessible to the SAO itself, since creating your own proxy is more for modifying the params, returns, etc. of a message, and channel sinks are for manipulating the message typically without modifying the content (like compression, encryption, routing, etc.).   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) sxbyl8-Jan-04 14:06 sxbyl 8-Jan-04 14:06  Very thanks! I don't want to use CallContext only because it will transmit all CallContext object content in both call and return, and it will use some network bandwidth. Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) Heath Stewart8-Jan-04 16:44 Heath Stewart 8-Jan-04 16:44  The other methods I mentioned will be much harder to use. Frankly, the serialized ILogicalThreadAffinative implementation doesn't have to take much room if you just encapsulate basic Types like a String or a Guid. The channel sinks could take even more bandwidth than a CallContext if you're not mindful of the implementation. Besides, setting and getting objects from a CallContext is a heck of a lot easier than dealing with channel sinks. Once you read about them (again, that ".NET Remoting" book is good and gets in to that), I'm sure you'll agree! Oh, and if you use CallContext.FreeNamedDataSlot in the server method with the name you used in the CallContext.SetData call on the client, there shouldn't be anything serialized and sent back in the return message. This could save you bandwidth easily.   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: How can I get some objects like HttpContext when using SingleCall SAOS and does not host in IIS (with HttpChannel) sxbyl8-Jan-04 16:55 sxbyl 8-Jan-04 16:55  Yes, you are right, and I also think CallContext is the better way in my solution, if HttpContext is invalid. And thank you again for your help HttpWebRequest murali_utr7-Jan-04 17:04 murali_utr 7-Jan-04 17:04  hi, i need to send web request to server.but i need to send request from using universal proxie servers. any one help to me. thanks in advance. Murali.M Re: HttpWebRequest Heath Stewart7-Jan-04 18:41 Heath Stewart 7-Jan-04 18:41  You mean send a request through a proxy? See the HttpWebRequest.Proxy property. There already is a WebProxy class that lets you specify the host, port, a list of addresses that don't require the proxy, and user credentials if logins are required. If this isn't sufficient, you'll notice that the HttpWebRequest.Proxy property is of type IWebProxy, you can implement that interface and make your own proxy. Set the proxy instance and call HttpWebRequest.GetResponse (inherited from WebRequest, so you'll have to cast the return to an HttpWebResponse for HTTP-specific properties).   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: HttpWebRequest murali_utr7-Jan-04 19:11 murali_utr 7-Jan-04 19:11  Hi, thanks for ur help. Have A Nice Day! C# Forms/Controls Luther Baker7-Jan-04 14:24 Luther Baker 7-Jan-04 14:24  I wish to use the Dock property, but I need a 10 pixel inset on all 4 sides. Let's say I am creating a simple editor. I place a TextBox control on a Form, but I'd like 10 pixel insets on every side of the TextBox. One way: Add a panel to the form, position the panel with 10 pixel insets on all 4 sides, and Anchor to all 4 sides. Then, attach the (Dock=Fill) TextBox to the panel panel. Is there any way to do this without using a Panel like this? I realize that if all I was creating was a text editor, then I could just Anchor the text box to all side of the form, and position the text box correctly, but, my real application is a bit more complicated. There are several controls inside the form - including a splitter. So, I can't really use Anchor for every case. The crux of the problem is that when using the Dock property, the child control is docked right up against the edge of its parent. I was wondering if there was a property that could buffer or inset that child control. I'd like to avoid having to add a Panel to my application everytime I want to position something just the way I like it - while using the Dock property. How about a thick transparent border? FormBorderStyle will not work. I am working inside the form. I'd also like to do this same thing for controls inside the form attached to parent Panels. I see that Panel can have a BorderStyle. Is there a way I can somehow customize the actual border? I google "custom borders in C#" or something. Thanks, -Luther Re: C# Forms/Controls Heath Stewart7-Jan-04 18:38 Heath Stewart 7-Jan-04 18:38  As for the docking, you could use panels, which derive from ScrollableControl which has a DockPadding property. Dock you panels, set the padding, and you can dock or anchor your controls inside those. In regard to drawing a border, you can use simple owner-drawing by overriding OnPaint and drawing a rectangle (see the ControlPaint class for some handy helper methods), or go so far as to override WndProc and do it a little lower-level. I'd recommend the managed way for portability and ease, though!   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK----- Re: C# Forms/Controls Luther Baker7-Jan-04 19:37 Luther Baker 7-Jan-04 19:37  wow. Re: C# Forms/Controls David Stone7-Jan-04 20:31 David Stone 7-Jan-04 20:31  lutherbaker wrote: wow. Heh, I think that's what we all say to Heath's posts... When I can talk about 64 bit processors and attract girls with my computer not my car, I'll come out of the closet. Until that time...I'm like "What's the ENTER key?" -Hockey on being a geek Re: C# Forms/Controls Luther Baker7-Jan-04 20:28 Luther Baker 7-Jan-04 20:28  The first method works, and provides my insets. But regarding option #2, the point of the border was to "pad" the form. I do in fact, get the border to draw, but the child controls still Dock against the edges of the form, overlapping even the border I am drawing. Should I somehow affect the Form.ClientRectangle {get;} before forwarding to base.OnPaint () so that the border I've drawn is not overlapped by child controls? Or shall I work it out by attaching child controls to a singular, centered child Panel again? Also - what is the Form.ClipRectangle represent? The area that needs repainting? In my little app, its always 0,0,0,0. Shouldn't it be equal to the Form.ClientRectangle? It is 0,0,0,0 every time OnPaint gets called. Even when the app is completely hidden by other windows - and then pulled to the front. Regardless, thats just neat stuff. Thanks, -Luther Re: C# Forms/Controls Heath Stewart8-Jan-04 4:18 Heath Stewart 8-Jan-04 4:18  You mean the PaintEventArgs.ClipRectangle? The clipping region is the area that has been invalidated and needs repainting, yes. This will not affect the controls themselves, however (as you've noticed). In order to do that, you have to position the child controls. Changing this clipping region will have no affect, other than perhaps not painting all the invalidated regions. As far as it being straight zeros all the time, this doesn't seem right. Try overlapping it party with another window, or opening a dialog on your app and see if the clipping region is something else. I've done quite a bit of this and have never seen an "empty" rectangle. My other suspision is that - since the default value for numeric types of which Rectangle is made is 0, that you might have some bug in your code (no offense - just meant as another possibility). On a side note, clipping regions are often used to make non-rectangular dialogs, like Windows Media Player, RealOne, etc. Windows Layers are a better alternative but is only supported in Win2K and up and isn't as easy to program (though better in the long-run).   -----BEGIN GEEK CODE BLOCK----- Version: 3.21 GCS/G/MU d- s: a- C++++ UL@ P++(+++) L+(--) E--- W+++ N++ o+ K? w++++ O- M(+) V? PS-- PE Y++ PGP++ t++@ 5 X+++ R+@ tv+ b(-)>b++ DI++++ D+ G e++>+++ h---* r+++ y+++ -----END GEEK CODE BLOCK-----

Last Visit: 31-Dec-99 18:00     Last Update: 18-May-24 23:32 Refresh ᐊ Prev1...14282142831428414285142861428714288142891429014291 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.