|
Is it just me or is it time developers stopped adding those annoying GOT IT? popups everywhere. You're trying to use an app you've used a million times. You open it up, start diving in and..
Did you know you can change
the colour of the menu bar
to a slightly lighter shade of
purple!?!
[ Got it ]
And you can't do anything until you click "Got it". And then another pops up telling you that you can announce you can connect your spreadsheets to your social media account, and you can get notifications you don't want. And that they changed the menus to third-person plural.
I don't care, and you're stopping me from using the thing I'm paying for. And none of this is even vaguely important enough to stop me from doing anything until I acknowledge you.
Has anyone implemented these types of announcements, and if so, has there been a case where, in all honesty, it's important enough that someone acknowledges before they can do anything?
cheers
Chris Maunder
|
|
|
|
|
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣀⣀⣀⣀⡀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡾⠋⠁⠀⠈⠙⠳⣦⡀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡾⠋⠀⠀⠀⠀⠀⠀⠀⠈⢷⡄⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡾⠋⠀⠀⣠⣴⠶⣦⡄⠀⠀⠀⠈⣿⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡾⠋⠀⠀⣠⡾⠋⠀⠀⢈⡿⠀⠀⠀⢀⣿⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⣠⡾⠋⠀⠀⣠⡾⠋⠀⠀⢀⣴⠟⠁⠀⠀⣠⡾⠃⠀⠀
⠀⠀⠀⠀⠀⠀⠀⣠⡾⠋⠀⠀⣠⡾⠋⠀⠀⢀⣴⠟⠁⠀⠀⣠⡾⠋⠀⠀⠀⠀
⠀⠀⠀⠀⠀⣠⡾⠋⠀⠀⣠⡾⠋⠀⠀⢀⣴⠟⠁⠀⠀⣠⡾⠋⠀⠀⠀⠀⠀⠀
⠀⠀⠀⣠⡾⠋⠀⠀⠀⠀⠉⠀⠀⢀⣴⠟⠁⠀⠀⣠⡾⠋⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⣾⠋⠀⠀⠀⠀⠀⠀⠀⢀⣴⠟⠁⠀⠀⣠⡾⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⣿⡀⠀⠀⠀⠀⠀⢀⣴⠟⠁⠀⠀⣠⡾⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠘⢷⣄⡀⠀⢀⣴⠟⠁⠀⠀⢠⡾⠋⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠈⠉⠉⠉⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀
⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀⠀ ... It looks like you're writing a rant. Want some help?
|
|
|
|
|
I'm working on a react project that has a component and related components named filter, filter group, etc. They need a complete overhaul and I was told to create a new set of components so that we can slowly implement the new one. Now I'm having the mental dilemma of figuring out what to name these new components. I flat out refuse "NewFilter" or "FilterNew" because you know it's going to have another iteration one day..."Filter2" seems blah. Does everyone else fret over naming things? What would you pick?
|
|
|
|
|
|
Ha ha...I was looking at thesaurus entries. I was almost considering "sieve" just to be fun.
|
|
|
|
|
|
Ha ha.. looks like "CharlesFilter" wins?
That site is pretty sweet. Might actually use it once I put together more options.
|
|
|
|
|
I love !!!
I am working on a image file viewer thingy using Windows Imaging Components. I was going to call it WinCodecBitmap, but after spinning the wheel I think I will call it Hanna.
Thanks
Within you lies the power for good - Use it!
|
|
|
|
|
I put together the two suggestions (M-W thesaurus and wheel of names). I pasted the list of related words in wheel of names and a clairvoyant spin produced the right answer: WASH. Like in: if you don't know what to name it, it's a wash; any name is as good as the next.
Mircea
|
|
|
|
|
Looking for recommendations here...
I'm using Oracle Box VM. When I RDC into it, strange things happen.
First, Copy & Paste no longer works. Not Host to Remote, I'm talking about Copy & Paste INSIDE RDC. Select text, copy -> paste - Nothing.
It's also REALLY slow. I've tried various things like restarting rdpclip.exe. Still can't copy & paste.
If I work through the OracleBox window, everything is fine - except I can only use one monitor. Anyone know of a decent replacement that allows dual monitors?
NOTE: I don't want to TOGGLE between monitors, I want full use of both monitors.
Thanks
In theory, theory and practice are the same. But in practice, they never are.”
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
modified 1hr 5mins ago.
|
|
|
|
|
I use RDC on a dual-monitor Windows 10 system (left monitor) to connect to a single-monitor Windows 7 system (right monitor). I can copy & paste between the two. Your experience is different, though, correct?
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"You can easily judge the character of a man by how he treats those who can do nothing for him." - James D. Miles
|
|
|
|
|
I'm taking about copy & paste INSIDE RDC. Not from Host to Remote
In theory, theory and practice are the same. But in practice, they never are.”
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
|
|
|
|
|
I just now tried that, too, and it works as expected. I was using a couple of Notepad windows.
"One man's wage rise is another man's price increase." - Harold Wilson
"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons
"You can easily judge the character of a man by how he treats those who can do nothing for him." - James D. Miles
|
|
|
|
|
I use plain old mstsc.exe (the standard RDP client), and it does work with multiple monitors, as long as they're adjacent. The trick is to make sure your .rdp file contains the correct monitor IDs - and they're NOT necessarily the same as those reported by the Display Settings utility. To get the correct monitor IDs mstsc.exe recognizes, run:
mstsc /l
...which will enumerate your monitors (the ID you need) and the resolution and coordinates they're running (that should be your indicator as to which monitor that line represents). In my case, as I'm writing this, it shows monitors 1, 3 and 5 (even though I only have 3 physical monitors hooked up) and based on the resolution shown, I know the correct IDs are 1 and 5.
Therefore, my .rdp file contains the line:
selectedmonitors:s:1,5
You CANNOT set this purely by using mstsc.exe's UI - this has to be done by manually editing the .rdp file with some text editor.
There's other settings that can be written to the .rdp file through the UI (telling it to use multiple monitors, etc). I'm not certain which of the following are necessary, but along with the line above, I also have these, which are probably related:
screen mode id:i:2
span monitors:i:1
use multimon:i:1
Bottom line is, I suggest you enable multiple desktops using the mstsc.exe UI, save the .rdp file, close mstsc.exe, and then manually tweak the content to ensure (a) the 3 lines above are there and (b) adjust the selectedmonitors line based on the IDs you're getting back.
Note that those IDs can change just by rebooting your system. It's annoying, but I don't know of any solution for that. Sometimes "#5" will become "#4", so I have to change that one line. If it goes back to #5, I change it back.
I also use mRemoteNG, but I never tried to get it to use more than one monitor at a time.
A co-worker of mine uses RDCMan from SysInternals, but I don't think it supports multiple monitors (or if it does, it's all-or-nothing).
|
|
|
|
|
While I appreciate you taking the time to reply, I'm not sure it answered my post.
When I'm in RDS, Copy & Paste doesn't work (Inside RDC, not Host to Remote. Copy text, past, nothing!), and the whole experience is reallllly slow. I've tried multiple 'fixes' over & over, with no luck. so I'm looking for an alternative.
In theory, theory and practice are the same. But in practice, they never are.”
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
|
|
|
|
|
Sorry, I thought you were focusing on multi-monitor support.
But, I do tend to stick with mstsc.exe, and generally, copy and paste does work.
|
|
|
|
|
I use Royal Terminal Services and have for years. The guy who created this is a CodeProject member and an excellent guy (naturally) to boot.
cheers
Chris Maunder
|
|
|
|
|
Thanks!
In theory, theory and practice are the same. But in practice, they never are.”
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
|
|
|
|
|
I see your copy+paste not working and rise it to copy+paste working across users.
I copy something in my session and you can paste it in your session.
That was RDC to a Windows Server 2012... really funny 
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
Not talking about Users or Sessions.
Copy & Paste text INSIDE RDC not working
In theory, theory and practice are the same. But in practice, they never are.”
If it's not broken, fix it until it is.
Everything makes sense in someone's mind.
|
|
|
|
|
My guess is that there are several IT departments where I work scrambling to find a replacement.
I can already hear a director asking, "Is there any way we can get a copy of the codebase to maintain our own internal version of ICQ?"
|
|
|
|
|
By the way, the phrase "can we get a copy of the codebase to maintain our own version" should be heard as "now is a good time to update your resume"
|
|
|
|
|
Last time someone tried this, it was for MS Money. With no luck, unfortunately -> How to bin dump an excellent piece of software ... 
|
|
|
|
|
At least MS Money still works. Well, I've never used any of its online features, that is, so all offline functionality is still there and runs fine.
|
|
|
|
|
Sure. But I miss some modern features - like the filtersearch in comboboxes - and a few things I would have loved to implement. I actually see no point in keeping a source code sealed when it is not maintained anymore. I once started to reverse engineer, but that would be soooooo time consuming !
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
