|
|
I previously worked through the book (by one of my favorite tech authors - Jeff Duntemann) x64 Assembly Language Step-by-Step: Programming with Linux[^]
There was a lot of build-up to read just to get to the meat. At least 100 pages or so. It was tough & I read a lot.
This RISC-V Assembly Book Is Amazing!
I recently stumbled upon this new book that I'm reading right now:
RISC-V Assembly Language Programming: Unlock the Power of the RISC-V Instruction Set[^]
This book :
1. gets right to the point - you start writing Assembly almost immediately.
2. Explains things really clearly -- It has helped me put some ideas together that I've never understood and things seem much more clear.
Why Is It Easier?
I believe a lot of it is easier because it is based in the RISC-V Assembly.
Wow! You can really tell that RISC-V was built with all the "lessons learned" from x86/x64 Assembly
Getting the QEMU RISC-V Emulator Was Difficult
One thing that was very difficult was getting the QEMU RISC-V emulator going.
Unfortunately the book's instructions were a bit out of date or wrong.
I found a great blog that got me going in no time[^].
No I can write and run the book's code samples!
The Hardware Is on The Way
I have some hardware (where I can run some of these programs) coming today, too.
ESP32 C3[^]
Only $12 for two of them.
Anyone Else Learning / Writing RISC-V Assembly?
Anyone? Anyone?
|
|
|
|
|
raddevus wrote: One thing that was very difficult was getting the QEMU RISC-V emulator going.
I gave up. QEMU refused to operate in any of my environments. I tried several guides, and nada. 
Check out my IoT graphics library here:
https://honeythecodewitch.com/gfx
And my IoT UI/User Experience library here:
https://honeythecodewitch.com/uix
|
|
|
|
|
honey the codewitch wrote: I gave up. QEMU refused to operate in any of my environments. I tried several guides, and nada.
I felt the same way yesterday. I had spent all day yesterday and could not find any help or get it working.
It was a real pain. I even asked Copilot to help me but it wasn't helpful.
I finally got it working because I found that blog site (mentioned in original post).
I got very lucky.
I really had no idea what I was doing.
Even the blog site had so much information that I barely made it through it.
But, here's the deal.
First of all make sure you've installed QEMU properly on your dev machine:
$ sudo apt install qemu-system-riscv64
$ sudo apt install u-boot-qemu opensbi
After that, all I had to do was:
1) run this command to download a debian image:
$ wget "https://gitlab.com/api/v4/projects/giomasce%2Fdqib/jobs/artifacts/master/download?job=convert_riscv64-virt" -O debian-rv64.zip
2) Then follow these commands:
$ mkdir debian-rv64
$ cd debian-rv64
$ unzip ../debian-rv64.zip
$ cd artifacts NOTE: That last step was wrong bec the directory that gets unzipped is not named artifacts but is named something else.
Inside that "artifacts" directory, there is a readme.txt.
I ignored the rest of the blog author's instructions and followed that readme.
There is a command in there for how to start it:
Note: Edited command because I had line breaks incorrect
qemu-system-riscv64 -machine 'virt' -cpu 'rv64' -m 1G -device virtio-blk-device,drive=hd -drive file=image.qcow2,if=none,id=hd -device virtio-net-device,netdev=net -netdev user,id=net,hostfwd=tcp::2222-:22 -bios /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf -kernel /usr/lib/u-boot/qemu-riscv64_smode/uboot.elf -object rng-random,filename=/dev/urandom,id=rng -device virtio-rng-device,rng=rng -nographic -append "root=LABEL=rootfs console=ttyS0"
3rd Edit - With Line Breaks For Easier Reading (tested & it works)
qemu-system-riscv64 -machine 'virt' \
-cpu 'rv64' \
-m 1G -device virtio-blk-device,drive=hd \
-drive file=image.qcow2,if=none,id=hd \
-device virtio-net-device,netdev=net \
-netdev user,id=net,hostfwd=tcp::2222-:22 \
-bios /usr/lib/riscv64-linux-gnu/opensbi/generic/fw_jump.elf \
-kernel /usr/lib/u-boot/qemu-riscv64_smode/uboot.elf \
-object rng-random,filename=/dev/urandom,id=rng \
-device virtio-rng-device,rng=rng \
-nographic \
-append "root=LABEL=rootfs console=ttyS0"
That's it. Once I ran that command I had my RISC-V environment running.
It's running right now.
I had to install the build-essential package and I was able to compile, build, link via as and ld
Cannot believe I got it going.
I hope these steps might help you some time too. 
modified 3hrs 10mins ago.
|
|
|
|
|
Check this out. I was searching everywhere to better understand how those risc-v 64 linux images were created.
I finally stumbled upon all the steps you need here[^].
But that was way too much. I was thinking, "Why can't I just download the rv64 images I need?"
Finally, I found this link: Debian Quick Image Baker pre-baked images[^]
When you go there and you want a Linux image which runs on risc-v 64 which can be virtualized (run in QEMU), you have to pick the link that looks like: "Images for riscv64-virt"
The link there ( Images for riscv64-virt[^] ) will automatically download a 331MB file named: 2baed3d2ab30e7a4ff39c7e587c8b16dce3885afb2dc047dae555a8bc13e which is a zip file, but doesn't have a zip file extension. Ok, fine.
Well, when you unzip that file, you have everything you need to run the QEMU virtual OS which is Debian which runs on RISC-V. Oh, wow, after 2 days of sitting, staring, reading, searching I finally get it. "Oh, I'm trying to run a virtualized Debian linux which thinks it is running on a RISC-V Processor!" Ohhhhhh.... Man, I'm slow a lot. 
The list of files in that zip are:
* image.qcow2 -- image file
* initrd - linux stuff
* kernel - linux kernel
* readme.txt - readme provides command line for QEMU
* ssh_user_ecdsa_key -- stuff I don't know
* ssh_user_ed25519_key -- don't know
* ssh_user_rsa_key -- don't know.
I think if you follow my steps you may really get your virtual environment finally running.
But, of course maybe you don't care because much is different when you run on "real hardware" (ESP32) anyways. 🤓
Just thought I'd share this with someone else who has been thru the pain of QEMU / RISC-V.
modified 51 mins ago.
|
|
|
|
|
Not all assembly languages are created the same. The Intel/CISC machine languages have their roots in the old IBM 360 mainframes. These are complex instruction sets that require a lot of hardware to implement. The newer RISC instruction sets trade some of this hardware complexity for a significantly simpler machine language implementation using a lot more instructions to do the same functions. We've found that the RISC machines generally operate faster and can be optimized in ways that CISC cannot, which is why even the CISC instruction set used by Intel to this day has become more of a macro language on an underlying RISC instruction set that Intel has highly optimized.
As for having to read 100 pages before getting to the actual assembler, this is the sign of a poor tutorial on assembly. It has nothing to do with the actual language. I ran into the same issue when learning Windows programming until I found Charles Petzgold's books. Same language, same OS, but his books were far better at teaching Windows programming.
|
|
|
|
|
obermd wrote: As for having to read 100 pages before getting to the actual assembler, this is the sign of a poor tutorial on assembly.
Yeah, it's a balance. I mean, to really learn what's going on underneath the surface, a lot has to be explained.
And, since learning Assembly means you need to understand so many concepts (number bases, what hardware is actually doing, tools (compiler, linker, make, etc.)) there can be a lot to learn just to get to where you're learning the target thing.
Petzold's books were long and in depth, but I really enjoyed his style and I felt like he was inviting me into a secret club to learn things that few others knew. 
|
|
|
|
|
If you want to learn assembler because you think that you are smarter than the compiler, able to write faster code (you are not!), then you need only learn the syntax of the essential instructions, and you can use the inline assembly facilities provided by a lot of C/C++ compilers.
If you intend to write complete modules in assembly, whether you are developing the backend for a compiler, writing a driver, or a high performance library, then you must understand all that stuff in the first 100 pages.
I very much doubt that there is any description of, say, x64 or AArch64 architecture in less than 100 pages to teach you what you need to know to write a runtime system, even an interrupt handler, a driver or a compiler backend, or a library function, in pure assembler.
Complaining about 100 pages presentation of the architecture is probably because you think you are not going to need that information. But you are, if you are heading for serious assembler coding tasks.
Disclaimer: I do not know that specific book you are referring to. There are lots of poor books out there. What I am saying is that if you find any book of significantly less than 100 pages introduction to basic concepts of the architecture, they have skipped a lot of stuff that you have to learn from other sources. Te page counts of all those sources will probably add up to a lot more than 100 pages.
Religious freedom is the freedom to say that two plus two make five.
|
|
|
|
|
trønderen wrote: Complaining about 100 pages presentation of the architecture is probably because you think you are not going to need that information. But you are, if you are heading for serious assembler coding tasks.
Oh, I totally agree. And, like I said, Duntemann is one of my favorite authors.
I read the first edition of the same book back in 1993.
It was published as Assembly Language Step-by-Step[^] back then and the book taught me everything I know about low-level programming. It is the first book that helped me understand number bases (binary, decimal, hexadecimal).
So, really my only point is that since I've read those first 100 pages numerous times over the years it was a bit difficult to chew through them again since I was chomping at the bit to get to the good x64 Assembly stuff. 
Duntemann's book is really like a complete school of computing and software development all wrapped up, so in many ways it is a very short book. 
It is often difficult as an "Application Developer" to slow down so much with Assembly.
The things we use now that obfuscate all that stuff below are amazing and troubling at the same time.
Now the devs know "it's easy to create software". But it's still not easy when problems occur and you don't know where (or how) to look.
|
|
|
|
|
 for Charles Petzold
In a closed society where everybody's guilty, the only crime is getting caught. In a world of thieves, the only final sin is stupidity. - Hunter S Thompson - RIP
|
|
|
|
|
If... I do PLC, haven'T touched a uC since college.
M.D.V. 
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
I assume you know about the 'fluent api pattern', e.g. in c#, something like:
new MyFluentApi()
.DoThis(x)
.DoThat(y)
.DoAnother(z);
Now, I was looking for that pattern to do a similar thing in Pascal and recognized, that it is allready something like 'build in' since decades 
WITH myFluentThing DO BEGIN
DoThis(x);
DoThat(y);
DoAnother(z);
END;
|
|
|
|
|
Yep
Relearning Pascal, Turbo Pascal 3.0 on a RC2014 Z80 hardware running under CP/M 2.2.
Been since college days the last time I even saw any Pascal code. Wrote a couple of simple apps, still learning.
Learning the editor is twice as hard as the code. We sure take modern editors for granite.
If you can't find time to do it right the first time, how are you going to find time to do it again?
PartsBin an Electronics Part Organizer - Release Version 1.4.0 (Many new features) JaxCoder.com
Latest Article: EventAggregator
|
|
|
|
|
To be honest, I don't know Pascal really. I was a Modula2 Guy for decades (Modula also invented by Niklaus Wirth, the Pascal inventor I think).
And yes, I hate the 'WITH' in Pascal/Modula (especally when nested), but now I recoginze, it can be usefull too
|
|
|
|
|
Modula is available to run on CP/M, been thinking about kicking the tires.
Going on vacation tomorrow for a week but may give it a whirl when I get back.
If you can't find time to do it right the first time, how are you going to find time to do it again?
PartsBin an Electronics Part Organizer - Release Version 1.4.0 (Many new features) JaxCoder.com
Latest Article: EventAggregator
|
|
|
|
|
Enjoy your vacation
|
|
|
|
|
I was stunned by "FluentApi" when I heard the term.
I first saw it in modern times in C# unit testing and all these new devs were like "fluent api is so special...oh, wow, this new fluent api is just so amazing."
I was like, "what is fluent api?"
Then I saw it was something we were doing in C++ (specifically MFC/C++) back in 1995 or something.
Ok, so you return an object from the method and then you can call another method on the object immediately.
These new technologies which are 25 years old are so amazing!! 
Bell bottoms are in too and they are also amazing new technology that the world has never seen. 
|
|
|
|
|
|
I know some Clapton but hadn't heard that song. Great stuff! Sounds great and it's live.
Thanks for sharing. 
|
|
|
|
|
Mike Hankey wrote: Been since college days the last time I even saw any Pascal code.
Was Pascal already there when you went to college?  
Sorry... I could not avoid it
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
Help me to understand what I'm saying, and I'll explain it better to you
Rating helpful answers is nice, but saying thanks can be even nicer.
|
|
|
|
|
Towards the end, started out with PL/1.
No seriously we would scratch 1s and 0s in the sand and wait for the guy named Alu to come around with his abacus and perform the operation for us.
I'm so old I was the counter for Noah, but I was fired for letting cockroaches on the ship. In my defense I was busy picking out two of the female species to load.
If you can't find time to do it right the first time, how are you going to find time to do it again?
PartsBin an Electronics Part Organizer - Release Version 1.4.0 (Many new features) JaxCoder.com
Latest Article: EventAggregator
|
|
|
|
|
Mike Hankey wrote: I'm so old I was the counter for Noah
So you have changed your name since? I mean, if you survived the flood, you must have been one of his sons...
I was busy picking out two of the female species to load Have you noticed that a large fraction of the pictures made of the animals entering the ship, two by two, where the two lions both have large manes? I wonder how we can have lions today...
But then, we are getting close to the yearly rainbow festivals, which is a good occasion to bring up these drawings/paintings.
Religious freedom is the freedom to say that two plus two make five.
|
|
|
|
|
Add to that the fact that 2 individuals are not enough to re-establish a population.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
|
I guess that my background with Pascal and WITH as a student is a major reason why I never use this.something when programming in OO languages.
As classical Pascal did not have classes, you could not put functions manipulating the object (aka. RECORD) into the object definition itself. For functions that would later, in OO languages, become methods of the class, WITH was a nice way to simulate that you were inside the object definition.
I never understood why some people insist on using this. everywhere. I read it as a warning: The simple identifier would be ambiguous, and this. is a way to resolve the ambiguity. Sort of like always including the full path from the complete namespace name down to the method name when calling it. I guess my negative reaction to both is that I grew up with WITH as standard way to indicate that 'Now I am manipulating this object'.
Religious freedom is the freedom to say that two plus two make five.
|
|
|
|
|
Wordle 1,065 4/6*
⬛🟨⬛⬛⬛
⬛🟨🟨⬛🟨
⬛🟩⬛🟨🟩
🟩🟩🟩🟩🟩
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
