|
There is no any error in the above code ,but I want to make a button search by the patient_name in a DB when I wrote the following code I got an error:
Dim selcom As New OleDbCommand()<br />
Dim drobj As OleDbDataReader<br />
Dim message As String<br />
Try<br />
selcom.Connection = OleDbConnection1<br />
selcom.CommandText = "select* from PatientsTable where(Patient_Name= " & TextBox2.Text & ")"<br />
OleDbConnection1.Open()<br />
drobj = selcom.ExecuteReader<br />
<br />
If drobj.Read Then<br />
TextBox1.Text = drobj.GetValue(0)<br />
TextBox2.Text = drobj.GetString(1)<br />
TextBox3.Text = drobj.GetValue(2)<br />
TextBox4.Text = drobj.GetValue(3)<br />
TextBox5.Text = drobj.GetValue(4)<br />
TextBox6.Text = drobj.GetValue(5)<br />
TextBox7.Text = drobj.GetValue(6)<br />
<br />
Else<br />
MsgBox("The record not found")<br />
End If<br />
drobj.Close()<br />
Catch<br />
message = "You must write just a patient name in it's field "<br />
MsgBox(message)<br />
Finally<br />
<br />
OleDbConnection1.Close()<br />
End Try<br />
<br />
End SubSo what is the write code to make the search by name work?
deema.
-- modified at 23:29 Thursday 10th November, 2005
|
|
|
|
|
Deema Jack wrote: There is no any error in the above code ,but I want to make a button search by the patient_name in a DB when I wrote the following code I got an error:
Ok, so you DID get an error! What was it? Provide more information and thou shall receive quality help...
Anyway I can see one obvious coding problem with this line:
Deema Jack wrote: selcom.CommandText = "select* from PatientsTable where(Patient_Name= " & TextBox2.Text & ")"
It should read:
selcom.CommandText = "select * from PatientsTable where Patient_Name = '" & TextBox2.Text & "'"
Note the use of single quotes surrounding the TextBox2.Text value otherwise SQL Server will most likely throw out the query. All strings should be quoted in queries. Additionally there should be no parentheses where you have used them in the WHERE clause.
...Steve
-- modified at 23:02 Thursday 10th November, 2005
|
|
|
|
|
Thanks Steve,thank you very much. Do you know,I tried the statement which you wrote above before you tell me ,but I got an error,I think my error was in the quotes,but when I copyed yours it's done, Thank you again. I want to say that I'm a begginer student in Vb.net in an institute for computer ,there,they're just teaching us the basics of the vb.net language.
So, would you tell me about the try-catch-finally statements, what is the correct method in writing them, I don't know more about it,and could you tell me the name of a helping book in the structured exception handling.
with thanks,
deema
-- modified at 3:30 Friday 11th November, 2005
|
|
|
|
|
Deema, you are welcome. Glad I could help you.
The best first place to find more information on structured exception handling would be a Google search. Also try searching through The Code Project archives for articles on the subject. The VB.NET online help is also useful.
I could not provide a tutorial on the subject in this forum - it is not the place for it and I simply don't have the time to do so but I will answer any specific questions if you get stuck at any stage as will many other contributors.
...Steve
|
|
|
|
|
Thanks Steve ,I really appreciate your helpe,it's true that google is the huge source for this and any other information. Also,this forume butI'll need more time to search it,but it's o.k.
Thanks
deema
|
|
|
|
|
i want a function in the web service to return a xml file which contains multiple value i need, how to write this function ? using Array ???
I am Entry level person
|
|
|
|
|
I just made a BIG, STUPID mistake. I deleted all the .resx and .aspx.vb files on my machine through Dreamwaver Test Server view! It will kill me to re-write all the code  .
I have recently re-built the project into .DLL file before deleting those files. Is there anybody know how to decompile .DLL file to get source code back????
I also find there is a tempporary folder "_vti_cnf" under my wwwroot/project folder. In this folder, there are .aspx.vb and .RESX files. However, .aspx.vb file only contains the information like :
vti_encoding:SR|utf8-nl
vti_timelastmodified:TR| 17 Oct 2005 16:58:30 -0000
vti_extenderversion:SR| 4.0.2.8912
Could anybody help me out???
Thank you in advance!!!!!
|
|
|
|
|
Vicky,
Stupid question, but are the files in the recycle bin or do you do what I do and delete bypassing the r/c bin?
If you have not already done so, I suggest downloading a file undelete utility from the web - there are several out there, try FreeUndelete for a start but of course download it on another machine or to a different drive etc so you won't overwrite any deleted files.
Programs do exist to extract resources etc from DLLs but I cannot help in that regard. They certainly won't be able to recover your source code.
...Steve
|
|
|
|
|
Assuming you compiled to the DLL to msil and not all the way to native then Reflector works reasonably well - you will have to massage the code a lot to restore it to it's original state, but it is a lot faster than rewriting it ...
http://www.aisto.com/roeder/dotnet/[^]
|
|
|
|
|
I would like to know how to code a class library that will show the number of sentences in any document or file that is open. The number has to show in a label.
Thanks
|
|
|
|
|
los_coronado wrote: I would like to know how to code a class library that will show the number of sentences in any document or file that is open. The number has to show in a label.
This sounds like a homework/project/assignmnent question to me.
Where do you want to start? Do you have any idea how to approach this task? What you have asked for is rather vague and open-ended. What part are you particularly having trouble understanding? How to read the file, parsing the file's contents into sentences, creating the label (and where the label is to appear), is this a standalone program, part of a Word addin component, or what?
Be more specific with your questiosn and we can provide more useful help to you. We will not however, write the code for you. For that see www.rentacoder.com
...Steve
|
|
|
|
|
Sorry, this is the first time I post a question here.
Ok, here is what I need to do. I have a text box and labels to get the number of characters, words, sentences, paragraphas in it. I want to get the number of sentences, but I keep getting one when there is no "." in it.
Here is the code
Dim pstrStringString
Dim mintWords As Integer
Dim pstrSentences() As String = Split(pstrString, "." -1)
For s As Integer = 0 To pstrSenteces.Length - 1
mintWords +=1
I have to show the number of sentences in a label when a button is click. Why do I keep gettin one even tough there is no "."
|
|
|
|
|
los_coronado wrote: Why do I keep gettin one even tough there is no "."
I assume that you have typed in this code directly rather than copy/paste since there are a few syntax errors in it?
Anyway the problem is that Split(pstrString, ".", -1) will return ALL substrings of the input string regardless of the number of delimiters found. In other words Split("abc.def.ghi", "." , -1) will return an array of three substrings viz: "abc", "def", "ghi" whilst an input string of Split("this is a sentence without a period", ".", -1) will return an array of one element (look at the previous example too - there are only two periods in that string and it returned three).
Tip: when you observe unexpected behaviour like this, the first port of call should be to the online Visual Studio help. Just review the description of the function/method/property with which you seem to have trouble and it may explain why that behaviour occurs.
This is all part of the learning process, and thanks for posting a more comprehensive description of the problem since it helped me to help you.
...Steve
|
|
|
|
|
Thanks Steve.
I will follow your advice.
|
|
|
|
|
los_coronado wrote: I would like to know how to code a class library
Just type for a bit, then when it feels like you're done, stop.
los_coronado wrote: show the number of sentences in any document or file that is open.
OK, here's where you're really not telling us what you want.
1. Any document of what format ?
2. What does 'open' mean ?
3. How do you define a sentence, is it a line in a text file, or a full stop on the end of a word ? Or something else ?
Once you can define those things, then you can write some code. If you have *specific* questions about code you tried to write yourself, then ask here. Otherwise, as someone has said, try rentacoder, and accept that you will never be a programmer.
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
Hello Forum Members,
I'm a newbie and I'm working on a small windows application that does an "activity" calculation. I would like to send the result of the calculation along with other information gathered (from text boxes) on the application to an excel file, with the ability to re-send new calculations done to the same excel file in the subsequent rows below (with the ability to add as many as I want). I have it working now where I have the headers, and the corresponding values below them going into an excel file. I'm trying to find information on how to get a new calculation into a new row below but I'm stumped. I took me forever to realize that I had to add an excel reference to my project to get the extraction to work. Not even sure if I'm going about this the right way. Any help would be greatly appreciated!!!
Here is the code for my "ExtractData" subroutine.
Private Sub ExtractData2()<br />
<br />
'Initialize Excel and create a new workbook/worksheet<br />
Dim excelApp As New Excel.Application<br />
Dim excelBook As Excel.Workbook = excelApp.Workbooks.Add<br />
Dim excelWorksheet As Excel.Worksheet = _<br />
CType(excelBook.Worksheets(1), Excel.Worksheet)<br />
'Makes Excel invisible to the user until spreadsheet is populated<br />
excelApp.Visible = False<br />
<br />
With excelWorksheet<br />
excelApp.Visible = True<br />
<br />
<br />
.Range("A1").Value = lblDate.Text ' these are labels that I am using from the designer view<br />
.Range("A1").Font.Bold = True<br />
.Range("A1").ColumnWidth = 10<br />
.Range("B1").Value = lblIDnumber2.Text<br />
.Range("B1").Font.Bold = True<br />
.Range("B1").ColumnWidth = 12<br />
.Range("C1").Value = lblFname2.Text<br />
.Range("C1").Font.Bold = True<br />
.Range("D1").Value = lblLname2.Text<br />
.Range("D1").Font.Bold = True<br />
.Range("D1").ColumnWidth = 15<br />
.Range("E1").Value = lblHeight2.Text<br />
.Range("E1").Font.Bold = True<br />
.Range("E1").ColumnWidth = 15<br />
.Range("F1").Value = lblWeight2.Text<br />
.Range("F1").Font.Bold = True<br />
.Range("F1").ColumnWidth = 15<br />
.Range("G1").Value = lblCounts2.Text<br />
.Range("G1").Font.Bold = True<br />
.Range("G1").ColumnWidth = 15<br />
.Range("H1").Value = lblCounttime2.Text<br />
.Range("H1").Font.Bold = True<br />
.Range("H1").ColumnWidth = 15<br />
.Range("I1").Value = lblIsotope2.Text<br />
.Range("I1").Font.Bold = True<br />
.Range("I1").ColumnWidth = 15<br />
.Range("J1").Value = lblEnergy2.Text<br />
.Range("J1").Font.Bold = True<br />
.Range("J1").ColumnWidth = 15<br />
.Range("K1").Value = lblRatio2.Text<br />
.Range("K1").Font.Bold = True<br />
.Range("K1").ColumnWidth = 15<br />
.Range("L1").Value = lblEfficiency2.Text<br />
.Range("L1").Font.Bold = True<br />
.Range("L1").ColumnWidth = 15<br />
.Range("M1").Value = lblActivity2.Text<br />
.Range("M1").Font.Bold = True<br />
.Range("M1").ColumnWidth = 15<br />
<br />
.Range("A2").Value = txtDate2.Text ' these are text boxes where the user enters values to do the calculation<br />
.Range("A2").Font.Bold = True<br />
.Range("A2").ColumnWidth = 10<br />
.Range("B2").Value = txtIDnumber2.Text<br />
.Range("B2").Font.Bold = True<br />
.Range("B2").ColumnWidth = 12<br />
.Range("C2").Value = txtFname2.Text<br />
.Range("C2").Font.Bold = True<br />
.Range("D2").Value = txtLname2.Text<br />
.Range("D2").Font.Bold = True<br />
.Range("D2").ColumnWidth = 15<br />
.Range("E2").Value = txtHeight2.Text<br />
.Range("E2").Font.Bold = True<br />
.Range("E2").ColumnWidth = 15<br />
.Range("F2").Value = txtWeight2.Text<br />
.Range("F2").Font.Bold = True<br />
.Range("F2").ColumnWidth = 15<br />
.Range("G2").Value = txtCounts2.Text<br />
.Range("G2").Font.Bold = True<br />
.Range("G2").ColumnWidth = 15<br />
.Range("H2").Value = txtCounttime2.Text<br />
.Range("H2").Font.Bold = True<br />
.Range("H2").ColumnWidth = 15<br />
.Range("I2").Value = txtIsotope2.Text<br />
.Range("I2").Font.Bold = True<br />
.Range("I2").ColumnWidth = 15<br />
.Range("J2").Value = txtEnergy2.Text<br />
.Range("J2").Font.Bold = True<br />
.Range("J2").ColumnWidth = 15<br />
.Range("K2").Value = txtRatio2.Text<br />
.Range("K2").Font.Bold = True<br />
.Range("K2").ColumnWidth = 15<br />
.Range("L2").Value = txtEfficiency2.Text<br />
.Range("L2").Font.Bold = True<br />
.Range("L2").ColumnWidth = 15<br />
.Range("M2").Value = txtActivity2.Text<br />
.Range("M2").Font.Bold = True<br />
.Range("M2").ColumnWidth = 15<br />
<br />
<br />
End With<br />
<br />
End Sub<br />
<br />
Private Sub btnSaveRecord_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles btnSaveRecord.Click<br />
ExtractData2()<br />
<br />
<br />
End Sub<br />
DCgamer
|
|
|
|
|
Take the variables excelApp, excelBook, and excelWorksheet outside of ExtractData2 method. To your form, add a button that creates the three variables mentioned above and initializes the subtitles.
Now that you have a reference to the excelWorksheet, you should be able to append data from your form to any row as long as you keep track of the last row number added.
To close the application:
<br />
excelBook.Close()<br />
System.Runtime.InteropServices.Marshal.ReleaseComObject(excelBook)<br />
excelBook = Nothing<br />
excelApp.Quit()<br />
System.Runtime.InteropServices.Marshal.ReleaseComObject(excelApp)<br />
excelApp = Nothing<br />
|
|
|
|
|
Help ! I'm struggling to get consistent repeatable use of the following code
http://support.microsoft.com/?kbid=311284. I'm basically have an AXWebBrowser control on an MDI form. The page loads a html file with images. The images have an ID tag that I then capture as being clicked and process some action e.g. show another mdi form. Unfortunately it works once but then fails any subsequent clicks. Equally the mouse over event works for a period of time (see Microsoft example) - then stops ! Randomly. The event capturing just does not fire. Anyone out there have example code ? I just cant get reliable event firing from the Microsoft example.
|
|
|
|
|
i am working on an application which is a door terminal application, now i want to implement a function which is when there is no one touch the application there is a screensaver application(which i also did it ) come up. how to implement this, especially how to detect no one touched the application within certain time!
I am Entry level person
|
|
|
|
|
Set a timer to start your screensaver. reset it every time your app recieves a keyboard or mouse event.
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
this is an example of out I set a textbox:
Private Function InputBoxValue(ByVal controlname As String, ByVal value As String)
Dim tmpIBox As mshtml.IHTMLInputTextElement = doc.getElementsByName(controlname).item(, 0) 'get first name inputbox
tmpIBox.value = value
End Function
But I can't for the life of me figure out how to set a radio value... example:
<INPUT NAME='DL_trial_timeAmPm' TYPE=radio VALUE='AM' >AM<INPUT NAME='DL_trial_timeAmPm' TYPE=radio VALUE='PM' >PM<P> 
Thanks in advance.
|
|
|
|
|
kjhkjhkjhkjhkjhkjhkjhkjh wrote: But I can't for the life of me figure out how to set a radio value... example:
For the life of me I can't figure out what you are talking about. If you want help, help us and yourself by explaining your programming problem better and in more detail.
...Steve
|
|
|
|
|
I need to set a radio value on a webpage....... I programmatically login into the website using the axwebbrowser control. Then from there on I use getElementsByName Method on the document to get the fields value or set it. I can get the method to work for every other field type except radio option which is an input field. If you've never worked with html and this object you'll of course have no idea what I'm talking about. Again thanks in advance if you have any help in this matter.
example that I'm trying to perform:
Private Function InputRadioValue(ByVal controlname As String, ByVal value As String)
Dim tmpIBox As mshtml.IHTMLOptionButtonElement = doc.getElementsByName(controlname).item(, 0) tmpIBox.checked = True
End Function
I've changed the index on the item but it doesnt seem to point to the right value
|
|
|
|
|
nice username. is that your real name?
I wish my username was that cool.
Pumk1nh3ad illustrates that Intelligent Design oft goes awry. - Ed Gadziemski
|
|
|
|
|
Try this...
Dim tmpIBox As mshtml.IHTMLInputTextElement = doc.all.item(controlname, 0)
...Steve
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
