|
'fill array with some values
For j = LBound(word_array) To UBound(word_array)
word_array(j) = "*"
Next j
Randomize
'fills the array with letters from the word in random space provided.
For i = LBound(word_array) To UBound(word_array)
b = 1 + (Rnd * (word_size - 1))
'this section checks to see if the random is already been used..
'if not place a letter into its space..
'if it has been used, it uses a loop to regenerate a new random number and do a second check
If word_array(b) = "*" Then
word_array(b) = Mid(word, i, 1)
Else
Do While word_array(b) <> "*"
b = 1 + (Rnd * (word_size - 1))
If word_array(b) = "*" Then
word_array(b) = Mid(word, i, 1)
Exit Do
End If
Loop
End If
Next i
Nab
|
|
|
|
|
Good work, I am glad I could help
|
|
|
|
|
I am creating a wizard that contains next and back buttons. When the user selects next, then a certain form is loaded and the name of the form is placed in an array. Then when the user selects the back button the previous entry in the array contains the name of the previous form. Ideally the previous form should then be brought. The code I'm thinking about is similar to the following:
sub btnBack_click(...) Handles ...
Dim prevFormName As String
Dim prevForm
formArrayList.removeAt(formArrayList.count-1)
prevFormName = formArrayList(count-1)
prevForm = New CType(prevFormName, form)
prevForm.showDialog()
Me.close
end sub
Thanx -
Frank
|
|
|
|
|
I would suggest a somewhat different approach. Typically when you create a Wizard style dialog form you use a single base dialog form, and place all the controls for each step on a separate panel. Then you set the previous panel Visible property to False and set the next step Panel visible to True.
This gives you a cleaner appearance because there is no flicker between steps as the user navigates the wizard because you do not ever hide/show a form. It also usually makes your navigation logic simpler - typically you do not perform any actions or field validation when stepping back, only when stepping forward.
Of course you end up with a lot more code in a single form, but the VS.IDE supports organizing step code in Regions which makes things more manageable.
If you want to use separate forms, probably the simplest thing to do is to load them all into a global collection when the wizard starts, and then access them from the gloabl collection by a key value.
|
|
|
|
|
Good idea
I thought about doing that...once you set up all the panels, then you would want them to be in different locations when you are designing them. However, when the program is running you would then position each one correctly. Is this correct?
Also you would need to keep a Global panelArrayList that acts as a stack. The Next button would push each new panel
in the arrayList while clicking on the Next button would pop the current one off.
(Depending on the user's choices, a different panel would appear and thus going backward requires an array to know what panel the last one was)
|
|
|
|
|
Yes. What I do is design a panel and then set the left coordinate to a large enough negative number to move it off the form area in design view. Then I move them all onto the form in the Load procedure, and simply toggle the first panel Visible property to True at run time.
As far as navigation code goes the approach really depends on the specifics of the wizard. A simple forward/backward single path wizard you can just use a Select Case that evaluates the step number and direction.
If you have conditional navigation or if you are writing a generic Wizard template then you would probably use some kind of stack.
|
|
|
|
|
I want to do reports which will be generated when I click a button. The reports will include information in them which
will have been pre-written like a Template but will also take details such as the persons name from a form. The persons
name ill be diplayed in the reporta at certain places.
Anyone nay ideas how to do this?
macca
|
|
|
|
|
I have a dropdownlist in my form called Status which displays a list of all the status that the form can be at.
The different status are: NEW
Used
Complete
What I want is that when I have a record that is status used then when I open the form to display this record
it will display the dropdownlist with Used as the selected Status and New will no longer be a member of the
status dropdownlist.
The dropdownlist is being populated by a select statement on the Status table in the database. Select * from Status.
Anyone know how to do this?
macca
|
|
|
|
|
Hi,
I am Anindya. I am developing a windows application. There I've used a toolbar. Now I want to design it. I want to paint it in Gradient color. How should I do this? Please help me in this concern.
Thanks in advance.
Anindya Chatterjee
|
|
|
|
|
Dear Friend,
I have a question like ,
I need to transfer the thumbnails to Microsoft Word Document (Which is existing) & in a Variable folder.
like there maybe several folders with some .Doc files in it ,it will ask for which folder & file to open ? I will not type the name,I will just select the file once(Document) where i may be inserting some pictures all in same size.
then if I click (Just double click it must be transferred automatically).
exit .it will save the opened Word file with the pictures i inserted.
Rahul
Rahul Dev Sharma
Software developer.
VB
|
|
|
|
|
Hi guys
I don't remember where (in COdeProject) is a sample of an window form that is part oh the Windows Desktop . It's similar to "Google Desktop Sidebar"
can you write the link please ??
Thanks
|
|
|
|
|
Hello,
I got a problem handling images. After I did everything I wanted with the image, I want to write it into a file using image.Save. At the PC at the office this works fine. But when I tried this at home, I always got the "General failure in component GDI+"-error. I don't know how to solve this. I still tried to write the image into a FileStream but I got the same error. Do you have an idea how to solve this or get a workaround? 
Me.MyBase
|
|
|
|
|
I'm writing an independent help system with WhatsThisHelp support. I know WinHelp supports all this, but I need a single executable that has no other dependencies than the standard VB runtime files. It's nearly finished, but there's one thing I can't figure out. How do I intercept and respond to a WhatsThisHelp Click Event?
As soon as you activate WhatsThisHelp, VB6 doesn't receive the click event. It isn't even aware the cursor changed to arrow-questionmark.
Anybody got an idea how to do this?
Jottum
|
|
|
|
|
Dear friends
hi!.i m new to vb. can u tell me is there any way to set access permission to the file using vb code so that file can not be shared.
actually i have a set up file.after installation i don't want computers to access exe file in a network except one where set up is installed.so can anybody tell me how can i do that.is there any way to code my program so that i can acheive this goal.or any third pary tool is available for that.Please help me. any help will be appriciateable.
be the best...be helpful for others
|
|
|
|
|
Disable File Sharing for your App folder and it can only be xecuted
from the local computer. However, if the user has sufficient permissions they can share it anyway and still launch your App from the network.
I can't check the below code right now, no network. So forgive me if it doesn't work.
- Create a new project
- Add two labels next to each other on form one.
<br />
Private Sub Form_Load()<br />
<br />
Label1.Caption = "Path:"<br />
<br />
'If you only want one instance of your app<br />
<br />
If App.PrevInstance Then<br />
MsgBox "You are not allowed to start more then one instance of My App.", vbExclamation + vbOKOnly, "My App"<br />
Unload Me<br />
End If<br />
<br />
Label2.Caption = App.Path 'Display path.<br />
<br />
' Check if excuted from network<br />
<br />
If InStrB(Label2.Caption, "\\") <> 0 Then ' Double slash is network path<br />
MsgBox "You are not allowed to start My App from a remote computer.", vbExclamation + vbOKOnly, "My App"<br />
Unload Me<br />
End If<br />
<br />
End Sub<br />
Compile the code and run the exe. Run it again while the other is still open and see what happens. Close the exe. Now start it from a different computer on your network and see if it starts or displays the message.
HTH
Jottum
-- modified at 8:45 Friday 11th November, 2005
|
|
|
|
|
There's nothing you can do in your code to prevent this. Even if your installation removes the share, there is nothing preventing the admin of the machine from just sharing the folder your app is stored in and nothing you can do to prevent it. You have absolutely no control over this.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I have a set of ms-access queries in .txt file.
How can i execute those queries from a vb program?
-- modified at 4:11 Friday 11th November, 2005
I have got the code to execute the query from the text file but if a query
spreads across more than one line i am getting a problem because
i am using an array that stores each line in the database and executes it.
can u suggest how i can use a delimiter to indicate the end of a query or
an alternative.
Another problem is that i want to execute queries from many txt files.
Right now i have hard-coded the path of one of the text files.
I want to access each query sequentially( the user can't select) and i am working in vb 6 so kindly help
Please help.
Thanks in advance
-- modified at 6:09 Friday 11th November, 2005
|
|
|
|
|
VB6
Is this a list of queries to be accessed sequentially, or do you need to select?
Basically read the query from the file into a string, or string array depending on what you need to do, and then execute the appropriate string.
If you need more help I can assist if it is VB6
|
|
|
|
|
I want to know exact difference between Pag_Init() and Class constructor of page. What type of operations are possible in these. Thanks in advance.
|
|
|
|
|
I want to show images in dropdown. How it is possible. Can I put datagrid in dropdown. Thanks in advance.
|
|
|
|
|
I am currently working on a project that requires me to create a visual browser.... well, this is what i really want to do.. i have some pictures on my form, when the user place the mouse pointer over the picture, that picture would zoom up.. if the user moves the mouse pointer to the right or left. the picture would move in that direction.. something like the one they have in microsoft encarta.. can any one help me please!!!!
|
|
|
|
|
Basically, I don't know of any shortcuts, you need to code this behaviour yourself. Track the mouse, when it enters a picture, zoom it. If it's in a zoomed picture, move it as the mouse moves.
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
Is there a way to have the CommonDialog control return a path and not a filename?
Thanks,
Tim
|
|
|
|
|
|
The Folder Browser dialog is typically used if the user needs to select a folder only.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
