|
Check the manufactures website for a compiler. This is just a hunch, but I think it;s more likely that they'll offer C/C++ than basic. C is the traditional 1st compiler for an architecture and it's unabashed exposing of hardware guts makes it better suited for low level programming, especially on slower hardware. If you're really unlucky they might not offer anything other than assembly. In that case, if the only language you have is basic, I'd consider seeing about exchanging it for a different model that does support a higher level language if possible.
|
|
|
|
|
U mean that u want to use the BASIC language for
programing PIC .
There are some compiler availble in the market for
it but i fear they are expenisive .
Hi-Tech comiler uses C language to program PIC Mc.
Vikas Amin
Embin Technology
Bombay
vikas.amin@embin.com
|
|
|
|
|
hi i want to design a circuit to control Ac moters and fans for this perpose i want to use microcontroller and all the devices that i am using are control through this microcontroller i doing a project of home appliances controler control through mobile and internet for i have on off the lights through my computer using a circuit throug com port now i want to ragulates the moters and want to control all the circuits that i have design through this microcontroller and this microcontroller circuit control by my central server so i need help on PIC16F84 to write a code so that it can control AC moters and all my circuit's i am wating for this salution and the circuit if any body want to help me i will be greatful plz messages if any one have salution
Tm
|
|
|
|
|
|
brother i need ideas i am basicly a programmer not a hardwear disgner so thats i want good ideas and i dont know why u are using prohabitaed words plz i am in tention try to solve my problem dont ask me that what u want if u know tell me other wise dont reply   i hope u dont mind
|
|
|
|
|
|
brother i need salution plz dont say like this 
|
|
|
|
|
U made Tox angry (that not nice)
Anyway if u need to do such a complex circuit and ur not familiar
with Electronics then u need some good help or study for some time.
PIC is a good microcontroller u can use it for ur task , u can
even use 8051 .
sending u some sites pls go through it and find ur details
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=74
http://www.rentron.com/pic.htm
http://www.microchip.com/stellent/idcplg?IdcService=SS_GET_PAGE&nodeId=2136&secgrp=PicMicro_sg&doctype=DeviceInfo&xdoctype=AppNote&prodprefix=pic
http://www.electronic-engineering.ch/microchip/projects/projects.html
U can get lots more from Google
( but i recommand to get help of some hardware Engg )
Vikas Amin
Embin Technology
Bombay
vikas.amin@embin.com
|
|
|
|
|
Does anyone know of any free screen recorders tryin to build some tutorials for a small project i just completed. Or even if they have software that will do this?
Any help is much appreciated
Keep it coming
|
|
|
|
|
Hi dear!!!
u can use print-screen button to capture the current screen and then paste it in ms-paint for further editing & use. if u need software here is one for u.
Screen Hunter, available at wisdom-soft.com for free.
Shebi,
Chandigarh
|
|
|
|
|
gadwin capture is also free, I believe both the above software and this one supports timed captures too, so you can just set it up to capture every 10 seconds to a directory and take which ones you prefer, or snap the shots one at a time which ever you prefer.
_________________________
Asu no koto o ieba, tenjo de nezumi ga warau.
Talk about things of tomorrow and the mice in the ceiling laugh. (Japanese Proverb)
|
|
|
|
|
|
Get Windows Media Encoder, 6 mb off MS website.
Nunc est bibendum
|
|
|
|
|
I'm writing here out of desperation, I know it's not a general C++ topic but I've been unable to find any smartcard specific forums after a lot of searching.
I'm trying to talk to an ACR30 USB smartcard reader via the PC/SC Microsoft Winsmcrd.dll api.
The smartcard manufacturer is ACS and they're good for obtaining API manuals etc but the examples provided just won't work.
The smartcard model I'm using is a AT24C16, which is listed amongst the compatible cards. This card is a memory card and PC/SC doesn't allow for memory card writing, but ACS have provided methods to do this and written a manual specifically for PC/SC memory card access.
for example, the following copied code (except for reader name) returns error code 0x80100066 "The smart card is not responding to a reset" ie no response from the card
rv = SCardConnect(
hContext,
"ACS USB 0",
SCARD_SHARE_EXCLUSIVE,
SCARD_PROTOCOL_RAW,
&hCard,
&dwActiveProtocol);
if I change the call to the following, I receive a successful response
rv = SCardConnect(
hContext,
"ACS USB 0",
SCARD_SHARE_DIRECT,
SCARD_PROTOCOL_UNDEFINED,
&hCard,
&dwActiveProtocol);
but because I'm using the different defines I don't know what sort of knock on effect this is having on the remaining api functions I call. Pretty well all of them aren't working as I'd expect.
I think this is a common model for smartcard developers, so I was wondering if there's anyone else out there who has worked successfully with this unit and who could give me some guidance.
many thanks
|
|
|
|
|
|
PCI Express vs. AGP8X
Pros and Cons?
Opinions?
Sites that compare and contrast?
TIA
Better to live one day as a lion than a hundred years as a sheep.
|
|
|
|
|
Mike [[]]:
Mike Mullikin wrote: PCI Express vs. AGP8X
PCI-e, absolutely! Why? Many reasons: bandwidth, upgrade capacity, performance, etc, etc, etc…
Mike Mullikin wrote: Sites that compare and contrast?
Check this out:
http://www.tcmagazine.info/articles.php?action=show&showarticle=127
Mike Mullikin wrote: Opinions?
Well, my last card (before the one I have) was an old S3 ( ), so I can’t tell you much (by experience) about the AGP cards. But now I have a 7800GTX and believe it: it is worth the price! I play games like F.E.A.R. HL2, Far Cry, Doom 3, Quake 4, and many more, with the specs at the max with no prob!!!
Peace [[]]
hint_54
|
|
|
|
|
PCIe, AGP is a dead interface, new cards are now PCIe only. If you're building a lowend system that you're sure will never be upgraded it doesn't matter much, but for anything where gfx performance does matter if you go with agp now, you'll need a mobo upgrade if you need to upgrade your gfx card as well. There're a handful of boards that support both interfaces but they all did it by kluging an emulation of one of them, with inherently pitiful performance as a result.
|
|
|
|
|
If you plan to use old mobo, then AGP, else SLI, if you are hardcore gamer or graphics desginer or an enthusiast. Check Toms Hardware and Anand Tech for comparisons.
Farhan Noor Qureshi
if (this == this) thow this;
|
|
|
|
|
Hello all!
As I'm looking for a new hobby to spend the little time I have, I came across some nifty embedded systems at some mechatronic labs here at school. Being educated as a technical embedded systems programmer, I thought that it would be nice to build some hardware myself.
After some thought, I chose a robot as my first undertaking to get into this. Right after I decided this, I found my first problem: where am I going to get all the hardware? Since there are is a lot of crap out there, I must carefully choose my tools. Some of the things I need are:
<list> Microcontroller with C++ compiler
Servos
Pneumatic or Hydraulic cilinders
etc..
So my question to my fellow geeks out there: do you know some good stores for me where I can get all of this stuff?
Thanks a bunch!
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
Mouser electronics or digikey will have the servos. As for microcontroller, depends on how much you want to spend. The PIC's and Motorola HCxx will have the cheapest test/eval boards for development and open source or inexpensive compilers. If your looking for more brute force, you can always get student discounts. I.e. ARM risc processor compilers are around $500 for student discount.
-good luck
|
|
|
|
|
Hello,
Thanks for your answer. I'll look more into this micro controller business and see where I can get a decent one that fits into my budget. I still have to see what my budget will be...
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
If u want microcontroller then
u get PIC or a 8051 series .
that are the most cheap and reliable
But later on u can get the damest MC
if u have good budget.
But i prefer that u get some Kit and then
start ur work ,that will be fine and worth
the expense
Vikas Amin
Embin Technology
Bombay
vikas.amin@embin.com
|
|
|
|
|
Hello,
Thanks for your information. The 8051 series sounds nice and I have some experiance with them from college. I failed to find a C++ compiler for the board.. 
I'll probably have to get some decent budget for this undertaking of mine and I assume that it is an almost once-in-a-lifetime purchase, so I better do it good.
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
|
Look at www.botmag.com
You should be able to find a lot of suppliers in there.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
