|
Helfdane wrote: performs acceptable given 40 threads
40 threads on a dual core? It can perform better if you use few threads. Under that load, you're spending an awful lot of time doing context switching going from thread to thread to thread.
|
|
|
|
|
Didn't I say that? 
led mike
|
|
|
|
|
Sometimes is multiple people tell him the same thing, it might sink in that it's not a good idea. 
|
|
|
|
|
Dave Kreskowiak wrote: it might sink in
LMAO, I hear you. I did have that sinking feeling while typing my reply to the OP.
led mike
|
|
|
|
|
In a (VB).NET application I have changed the roaming property of an user setting from false to true.
If I run the application the setting is now written (through my.settings.save) to the roaming user.config, but if I restart the application the setting is still being read from the local user.config !
Only if I delete the entry (manually) from the local user.config, then the setting is being read from the roaming user.config.
Somewhere in MSDN I read that if there were duplicate settings in local and roaming, the roaming one should override the local; in my case this seems only true for the writing of the setting.
Is this "bug" Microsoft's or mine ?
|
|
|
|
|
Hi I am trying to build a bluetooth application. I am trying to connect my laptop to my phone. This is the code i am using. I dont know why i keep getting this winsock error 10014. I looked into MSDN which says
"Bad address.
The system detected an invalid pointer address in attempting to use a pointer argument of a call. This error occurs if an application passes an invalid pointer value, or if the length of the buffer is too small. For instance, if the length of an argument, which is a sockaddr structure, is smaller than the sizeof(sockaddr)."
I am not sure how to check the buffer and how can i find out whats wrong. Please help me i am stuck!!!
///// My code/////////////////////
#include "stdafx.h"
#include <initguid.h>
#include <winsock2.h>
#include <ws2bth.h>
#include <stdio.h>
DEFINE_GUID(OBEXFileTransfer, 0x00001106, 0x0000, 0x1000, 0x80,0x00, 0x00, 0x80, 0x5f, 0x9b, 0x34, 0xfb);
int SDPGetPort( const char *addr, LPGUID guid )
{
int port = 0;
HANDLE h;
WSAQUERYSET *qs;
DWORD flags = 0;
DWORD qs_len;
bool done;
qs_len = sizeof(WSAQUERYSET);
qs = (WSAQUERYSET*) malloc( qs_len );
ZeroMemory( qs, qs_len );
qs->dwSize = sizeof(WSAQUERYSET);
qs->lpServiceClassId = guid;
qs->dwNameSpace = NS_BTH;
qs->dwNumberOfCsAddrs = 0;
qs->lpszContext = (LPSTR) addr;
flags = LUP_FLUSHCACHE | LUP_RETURN_ADDR;
wprintf (L"GUID ,%d %d",&qs_len,sizeof(WSAQUERYSET) );
if( SOCKET_ERROR == WSALookupServiceBegin( qs, flags, &h )) {
wprintf (L"Socket create, error 1 -%d\n", WSAGetLastError ());
//ExitProcess(2);
}
done = false;
while ( ! done ) {
if( SOCKET_ERROR == WSALookupServiceNext( h, flags, &qs_len, qs ) ) {
wprintf (L"Socket create, error 2 -%d\n", WSAGetLastError ());
int error = WSAGetLastError();
if( error == WSAEFAULT ) {
free(qs);
qs = (WSAQUERYSET*) malloc( qs_len );
} else if (error == WSA_E_NO_MORE ) {
done = true;
} else {
wprintf (L"Socket create, error 3- %d\n", WSAGetLastError ());
//ExitProcess(2);
}
} else {
port =
((SOCKADDR_BTH*)qs->lpcsaBuffer->RemoteAddr.lpSockaddr)->port;
}
}
free(qs);
WSALookupServiceEnd( h );
return port;
}
int _tmain(int argc, _TCHAR* argv[])
{
SOCKET sock;
SOCKADDR_BTH sa = { 0 };
int sa_len = sizeof(sa);
// initialize windows sockets
WORD wVersionRequested;
WSADATA wsaData;
wVersionRequested = MAKEWORD( 2, 0 );
if( WSAStartup( wVersionRequested, &wsaData ) != 0 ) {
ExitProcess(2);
}
// parse the specified Bluetooth address
LPSTR abhi = "00:1d:fd:8e:21:8d";
int abhisize = sizeof (abhi);
if( abhisize < 2 ) {
fprintf(stderr, "usage: rfcomm-client <addr>\n"
"\n addr must be in the form (XX:XX:XX:XX:XX:XX)");
//ExitProcess(2);
}
if( SOCKET_ERROR == WSAStringToAddress( abhi, AF_BTH,
NULL, (LPSOCKADDR) &sa, &sa_len ) ) {
wprintf (L"String to address %d\n", WSAGetLastError ());
//ExitProcess(2);
}
// query it for the right port
// create the socket
sock = socket(AF_BTH, SOCK_STREAM, BTHPROTO_RFCOMM);
if( SOCKET_ERROR == sock ) {
wprintf (L"Socket create, error %d\n", WSAGetLastError ());
//ExitProcess(2);
}
// fill in the rest of the SOCKADDR_BTH struct
sa.port = SDPGetPort(abhi, (LPGUID) &OBEXFileTransfer);
//if( sa.port == 0 ) {
//ExitProcess(2);
//}
if( SOCKET_ERROR == connect( sock, (LPSOCKADDR) &sa, sa_len ) ) {
wprintf (L"Socket connect, error %d\n", WSAGetLastError ());
//ExitProcess(2);
}
send( sock, "hello!", 6, 0 );
closesocket(sock);
Sleep(10000);
return 0;
}
|
|
|
|
|
Ask this question in the Visual C++ forum. I don't see anything in here that's .NET related.
|
|
|
|
|
You should ask in the C++ forum like Dave said. There's nothing to do with .NET in your problem. Now, can you tell where the error is occuring, rather than just dumping the whole code. Makes it tough to isolate the problem.
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
"Not only do you continue to babble nonsense, you can't even correctly remember the nonsense you babbled just minutes ago." - Rob Graham
|
|
|
|
|
Hi,
Is there any provision in dotnet architecture whereby if I simply create one CS file,
no matter what the application does (let any task execute), the control always ends at this CS file?
Thanks,
NetQuestions
|
|
|
|
|
Nope. Your "task" code would have to call this code directly if you wanted it to execute.
Or, if your code isn't dependant on any user interface elements at all, you could put it after the Application.Run(form) that starts your app.
|
|
|
|
|
Hi,
Could anybody help me in identifyieng free and opensource tool for source code versioning and bugtracking which can be seemlessly intigrated in Visual Studio 2008.
thanks in advance 
If you have faith in the cause and
the means and in God, the hot
Sun will be cool for you.
|
|
|
|
|
|
Thankyou very much for the reply....
But please also tell me about the free bug tracking tool for dotnet applications.
If you have faith in the cause and
the means and in God, the hot
Sun will be cool for you.
|
|
|
|
|
|
Hi,
In an existing application, without touching the CS File for MDI or it's designer CS File,
how can I at run time, add a button to the MDI?
I am looking at writing a standalone CS file which should do the magic.
Thanks,
NetQuestions
|
|
|
|
|
Create the button:
Button myButton = new Button() Give it some text:
myButton.Text = "Press me!"; Assign an event handler:
myButton.Click += new EventHandler(myButton_Click); and add it to the form:
myForm.Controls.Add(myButton); Magic 
Simon
|
|
|
|
|
Simon,
Suppose I have a form which has 5 buttons. On click of all the five buttons the MDI opens (all different tasks).
The code that you provided, if i write in a stand alone CS file, how do I get it implemented?
How is my CS file method invoked? I DO NOT WANT TO CALL IT EXPLICITLY ... that is a requirement!
|
|
|
|
|
This code would go in your form code, not normally a seperate CS file. The buttons show up on your form and call this code when the buttons are clicked.
NetQuestions wrote: I DO NOT WANT TO CALL IT EXPLICITLY ... that is a requirement!
This doesn't mean anything. I think you need to describe what your requirement is and why you have it as a requirement.
|
|
|
|
|
NetQuestions wrote: I DO NOT WANT TO CALL IT EXPLICITLY
Unfortunately, that is kind of how programming works. You can't just write a method and expect it to magically get called, you have to call it from somewhere.
How do you want it to get triggered?
You need to describe your requirement in more detail. What is it you are actually trying to do? I've shown you how to create and add a button to a form at runtime. All you have to do is decide how and when you want this code to be run.
Simon
|
|
|
|
|
Simon Stevens wrote: How do you want it to get triggered?
Telepathic software - been writing it for years, systems reads the users mind and invokes a thread in a different dimmension as required.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Mycroft Holmes wrote: Telepathic software
Ohh.. Clever. You should write an article on that. Actually, just think about it, and I'll read your mind.
Simon
|
|
|
|
|
Error 404
Regards,
Thomas Stockwell
Programming today is a race between software engineers striving to build bigger and better idiot-proof programs, and the Universe trying to produce bigger and better idiots. So far, the Universe is winning.
Visit my Blog
|
|
|
|
|
That's too bad, worked for me.
The best way to accelerate a Macintosh is at 9.8m/sec² - Marcus Dolengo
|
|
|
|
|
Simon,
let us say that my application is run, can i add any plug in or can I run a batch for the same?
|
|
|
|
|
Hi,
Let me make a wild guess. When you said "standalone CS file", you actually meant a completely separate application to the one that gets the new button.
Now you are throwing in other terms, plugin and batch. This all sounds a bit random to me and I think that if you can say precisely what it is that you want your programme to do then someone may be able to give you an answer.
Alan.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
