|
I set the BIOS up manually, but using all the settings it had auto-detected. Windows and the AMD Processor utility now report the CPU speed as what I would expect.
However, it did not alter my Windows Experience scores after I re-ran the test. And a processor stress test only ran about 10% faster than the previous run, despite the processor now running at twice the speed.
Man who stand on hill with mouth open wait long time for roast duck to drop in
|
|
|
|
|
Did you compare? You need ANY processor "grading" tool that can compare with online lists of similar computers. SiSoft Sandra just sprang to my mind, but PC-Mark or others might work just as well.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Hi friends,
I need to know how to remove virus from the Computer without using Antivirus Software.
If you know the Answer. Please Reply
Bye,
![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif)
Victory is Sweetest when you have Known Defeat
|
|
|
|
|
Can you you a webbased AV tool, or is that unacceptable for the same reason you can't do it the normal way?
If not, you'll have to search for a removal guide for the specific virus you've got. www.google.commay be of assistance.
It is a truth universally acknowledged that a zombie in possession of brains must be in want of more brains.
-- Pride and Prejudice and Zombies
|
|
|
|
|
Check the name of virus from online scanning tool. Most antivirus provider provide such service. Then, download removal tool/Fix tool and scan. Cost=$0
|
|
|
|
|
 I need to use a webcam for a project where I need to control cam's internal parameters. I know that I can find in the market cameras with some API's, like logitech.
For the other side I know I can do something with DShow and Windows Driver Development kit.
Someone can tell me what is the better way to begin with this project, I mean which tools are more convenient to use and if you know some appropiate camera with Api's or SDKs, that makes more easy and reliable this implementation, the application must be implemented in c++ -- THANKS IN ADVANCE !
|
|
|
|
|
Dear All,
Please give a solution to cut the paper when i print..
i m using thermal printer.
For print,i send a string to print
|
|
|
|
|
I don't think C# is sharp enough to cut paper.
If your printer can cut paper, there must be some command to make it do so. I would try sending an ASCII formfeed; then read the documentation.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
i want Same thing Any one can help me
|
|
|
|
|
Hi.
I just bought a Vaio VGN-AR890U Laptop.
It's OK. but there is a problem !
It has 4GB Ram , But its default OS is Vista 32bit that doesn't support 4GB Ram. To use 4GB Ram we have to install Vista 64bit.
So I'm looking for Windows Vista 64bit drivers for VGN-AR890U.
The official support web site ,is for American Laptops
http://esupport.sony.com/US/perl/model-home.pl?mdl=VGN-AR890U®ion_id=1[^]
My laptop made in China, So I can't use them 
Could you guide me how I can install a Windows Vista 64 bit ?
Many thanks in advance
|
|
|
|
|
 we have 2 laptop but this laptops are when playing radio voice is one of them come first other laptop playing same voice 10 second after what is the problem what can I do?
|
|
|
|
|
Do the laptops have TV tuners?
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
If you're listening to a radio station stream over the Internet, there's nothing you can do about it.
|
|
|
|
|
PLEASE LET ME KNOW IF ANYONE OUT THERE HAS AN APPLICATION TO CONTROL 4 OR MORE SERVO'S FROM A PARALLEL PORT. I AM LOOKING FOR SOMETHING LIKE THIS APP, WHERE A JOYSTICK COULD BE USED, BUT OPTIONAL : http://www.hvlabs.com/serservo.html[^]
Please let me know A.S.A.P. if anyone has any app , like this, http://users.swing.be/philippe.jadin/servoen.htm[^]  because this file is corrupt, it pops up about 30 times with a window saying Privilaged Instruction.
|
|
|
|
|
I voted you down because writing ALL CAPS OVER EXTENDED PERIODS OF TIME is considered "shouting" on the net.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Do you have an answerto my question Sebastian ?
I will keep the caps to a min.
Please let me know, i did not know about the caps thing.
|
|
|
|
|
ROVIO wrote: file is corrupt, it pops up about 30 times with a window saying Privilaged Instruction.
The file is not corrupt. Although I am not a Delphi/Pascal software engineer... I downloaded the source code at the URL you provided and viewed the source code. The instructions which are privileged are located in this function:
procedure outvalue(value : smallint);
begin
asm
mov dx,0378h
mov ax,value
out dx,al
mov dx,037ah
mov al,00000001b
out dx,al
mov dx,037ah
mov al,00000000b
out dx,al
end;
end;
The assembly instructions are performing raw port I/O which are indeed privileged. You can probably get this software to work by giving it permission to read/write raw I/O ports in protected mode. I would suggest using PortTalk - A Windows NT I/O Port Device Driver[^] to give this application the correct permission mask.
Best Wishes,
-David Delaune
|
|
|
|
|
Good day
Thanks for your post.
I have found an easier way to fix this app.
If you right click the application file, then go to properties, then click on the compatibility tab, click on the Run this program in compatibility mode tickbox, then select Windows 98 / Windows Me and click ok.This fixes the app to be used in XP.
If anyone knows of an better app to control more than 4 servos, directly connected(No hardware eg. servo motor controlers or any other electronic components)to the 8 data lines of the Parallel port please let me know.
Thanks again.
Riaan Deyzel
|
|
|
|
|
Good day.
I have tested the app (Servo Commander in my original link),and noting is happening, i have connected the servo to a 5vdc power source, and the data cable of the servo to the data pin on the parallel port, but nothing happens if i move the sliders, can anyone help me please??
I am still new to programming, and do not quite know what i am doing.
can someone please see what the problem with the app might be, and may it work if i anstall windows 95 rather than my current XP Pro.
Please guys i need help, please reply. 
|
|
|
|
|
ROVIO wrote: i have connected the servo to a 5vdc power source, and the data cable of the servo to the data pin on the parallel port, but nothing happens if i move the sliders, can anyone help me please??
I gave you the correct answer in my original post. You cannot perform raw i/o under windows XP.
ROVIO wrote: can someone please see what the problem with the app might be, and may it work if i anstall windows 95 rather than my current XP Pro.
The application is performing raw i/o and failing because XP is executing under protected mode[^] and those instructions are privileged. The assembly code in the software is essentially performing the same functions as _outp, _outpw, _outpd[^] and as the MSDN states:
Because these functions write directly to an I/O port, they cannot be used in user code in Windows NT, Windows 2000, Windows XP, and Windows Server 2003
You have three choices:
1.) Give your application the correct i/o permission mask using PortTalk - A Windows NT I/O Port Device Driver[^] or another similar technique.
2.) Execute the application under Windows-95 or Windows-98
3.) Write a device driver to perform the i/o.
Best Wishes,
-David Delaune
|
|
|
|
|
Good day Dave
Thank you for your post.
I think i will go for option 2 on your list.
You guys are realy good at this stuff. 
Thank you for your quick responce.
Regards
Riaan Deyzel
|
|
|
|
|
Good day
Thank you for all your help so far, I never even knew that you can not write directly to a parallel port in XP, i thought the app (servo cammander is faulty.
I found an easier app to give me access to the LPT1 port http://www.embeddedtronics.com/design&ideas.html[^] (userport.zip file [USERPORT])I will install it tonight & test it, but i am sure it will work fine.
Looks like my robotic tank might be up & running in no-time.
1. Does anybody know of an app that control more than 4 servo motors directly from the parallel (LPT) port, because in(Servo Commander)like this http://users.swing.be/philippe.jadin/servoen.htm[^] there is only 4 displays & 4 data line sliders.
2. Can anyone edit the source file to support all eight ports and with all eight sliders?
I do not know how to get the source files to an .exe file, so if someone is daring enough and can do this, please send me the completed.exe file & not the code.
Thank you guys, and i do hope someone can acheive this task.
Have a great day
Riaan Deyzel 
|
|
|
|
|
Or use dedicated hardware for the motor controller instead of risking the parallel port because the motors drew too much power and blew out the I/O chip.
That way, you won't have to be doing any privileged I/O (which can only be done in a device driver!), and the SDK that comes with the hardware will make it MUCH easier to control the motors.
A really good example of such can be found here[^].
|
|
|
|
|
Good day Dave.
I am already thinking of using the PhidgetMotorControl HC for my robotic tank, but it works out too expensive to buy a seperate controller just to control 4 to 5 servos.
I think the best bet will be to install windows 98SE on my robotic tank. I do a remote login to control my robotic tank, annd do not like Tight/real or any other VNC app.
1.Is there a way to install the Microsoft Remote Desktop app in Windows 98 Second edition?
2.& will all my apps (eg creative webcam NX software & other camera,wireless card,3g Modem software)work in win98 if they work in XP Pro?
Thank you very much for your post. 
|
|
|
|
|
ROVIO wrote: 1.Is there a way to install the Microsoft Remote Desktop app in Windows 98 Second edition?
No. RDC Is an XP or later only feature. There're a number of VNC implementations, you can probably find one that will still work in 9x if you look.
ROVIO wrote: 2.& will all my apps (eg creative webcam NX software & other camera,wireless card,3g Modem software)work in win98 if they work in XP Pro?
Debatable. 9x support is being dropped in a number of apps and drivers.
It is a truth universally acknowledged that a zombie in possession of brains must be in want of more brains.
-- Pride and Prejudice and Zombies
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
