|
ICA is an image format Citrix came up with and stands for Independent Computer Architecture.
I don't know of any libraries that will convert an image to this format. You may have to get with Citrix to see if they have something to help you.
|
|
|
|
|
Hello
How can i create one button for two events?
For example: I want to have one button for start/stop.
At the beginning of the application button name is start (start the event ), when I click the button second time it change the name to Stop (stop the event)????
I am very new to C# programming, i know to do this in VB6... Sorry for my bad english!
ThankYou
|
|
|
|
|
You can just create 2 event handlers one called Stop, the other Start and just swop between the 2, something like this
void Stop(object sender, RoutedEventArgs e)
{
button1.Click -= new RoutedEventHandler(Stop);
button1.Click += new RoutedEventHandler(Start);
button1.Content = "Start";
}
void Start(object sender, RoutedEventArgs e)
{
button1.Click -= new RoutedEventHandler(Start);
button1.Click += new RoutedEventHandler(Stop);
button1.Content = "Stop";
}
Initially the Click event would be set to Start().
Hope this helps
...and I have extensive experience writing computer code, including OIC, BTW, BRB, IMHO, LMAO, ROFL, TTYL.....
|
|
|
|
|
Ok understand that. But now i have problem to call this voids in
private void btnstart_Click(object sender, EventArgs e)
{
if (button1.Content = "Start")
{
}
else
{
}
}
I get error:The type or namespace name 'RoutedEventArgs' could not be found (are you missing a using directive or an assembly reference?)
|
|
|
|
|
OK, my error, I assumed you were using WPF not WinForms,. Here is the correct version
private void Start(object sender, EventArgs e)
{
button1.Click -= new EventHandler(Start);
button1.Click += new EventHandler(Stop);
button1.Text = "Stop";
}
private void Stop(object sender, EventArgs e)
{
button1.Click -= new EventHandler(Stop);
button1.Click += new EventHandler(Start);
button1.Text = "Start";
}
Sorry about that!
...and I have extensive experience writing computer code, including OIC, BTW, BRB, IMHO, LMAO, ROFL, TTYL.....
|
|
|
|
|
A singe event with an if statement should solve your purpose. Why do you need two events?
private void button1_click(object sender, EvenArgs e) {
if (button1.Text == "Start") {
button1.Text = "Stop";
} else {
button1.Text = "Start";
}
}
I am assuming that you're doing the job in a different thread or a BackgroundWorker.
|
|
|
|
|
I was thinking the same.Write two methods and handle it in that single event click.
|
|
|
|
|
As an aside (ish):
Please please please don't use the button text to work out what state you're in, use something like a boolean member variable instead (or, if you absolutly must use a property on the button, something like the Tag property). The code snippet you've given will break as soon as you try to localise your application, and just really isn't good practice.
Something like:
private bool started = false;
private void button1_click(object sender, EventArgs e) {
if (!started) {
button1.Text = "Stop";
started = true;
}
else {
button1.Text = "Start";
started = false;
}
}
Also, if you're working in a different thread, don't forget cross-thread access issues.
|
|
|
|
|
I know that Tony, I was just giving him a heads up on where to start. His question was very basic and I did not want to confuse him with the specifics. Anyway, thanks for the tip.
|
|
|
|
|
If you're going to use the localisation argument then surely you should set the button text to resource strings 
I like to use Tag for this, unless I am already using it for something else, as it really is a property of the button and should be stored with it.
Of course in most cases the button is controlling the state of some business object and you should check that instead:
private Task someBigJob;
private void button1_click(object sender, EventArgs e) {
if (someBigJob == null || !someBigJob.Running) {
button1.Text = "Stop";
someBigJob.Start();
}
else {
button1.Text = "Start";
someBigJob.Stop();
}
}
(for the benefit of the OP, I'm sure you know already!)
|
|
|
|
|
I've done that, I won't do it again; I'd create two Buttons but have only one visible at a time.
|
|
|
|
|
Can you tell us why ?
...and I have extensive experience writing computer code, including OIC, BTW, BRB, IMHO, LMAO, ROFL, TTYL.....
|
|
|
|
|
Wayne Gaylard wrote: Can you tell us why ?
Because its just a better way of doing it.
Because it avoids the previously mentioned problem of using the button's text to determine what to do, with all the inherant problems associated with using this method.
Because the 2 buttons do a different job and therefore should not be the same button (separation of concern)
I could go on.
|
|
|
|
|
Now this is an interesting thread. I don't agree with you that it's a better way to do it, because it comes with other problems (you have to manually place two buttons in the same place, make them the same size, tab order and keyboard mnemonic, etc).
If you want to have it look like one button, then make it one button. (Of course a Start and Stop button next to each other is also acceptable.)
I would say that the button does one single job: it toggles the state of the underlying thing that is being started or stopped. Logically, one might make it a check box, but users don't expect that.
|
|
|
|
|
J4amieC wrote: Because its just a better way of doing it.
It's just a different way of doing it. There's this thing called a ToggleButton[^].
I wouldn't use a button, but a checkbox. Makes it clear to the user that there are two different states, and that it toggles.
J4amieC wrote: Because the 2 buttons do a different job and therefore should not be the same button (separation of concern)
If they're calling the same method, one with a boolean "true" and the other with "false"? The world isn't that black-and-white.
Bastard Programmer from Hell 
|
|
|
|
|
I could, but J4amieC did a good enough job.
|
|
|
|
|
thank you
solve my problem with this:
If (txtstart.text="OK")
{
do somthing
}
else if (txtstart.text="Stop")
{
application.close();
}
|
|
|
|
|
That's bogus. 
|
|
|
|
|
I tried to find it, but Google today doesn't like and doesn't want to tell me this.
I have an enum:
[Flags]
enum EnumName
{
None = 0,
Value1 = 1,
Value2 = 1 << 1,
Value3 = 1 << 2,
Value4 = 1 << 3,
Values13 = Value1 | Value3,
Values24 = Value2 | Value4
}
How can I extract from this enum values that are "simple values"... I want to get collection, array, whatever, that will store values:
None
Value1
Value2
Value3
Value4
I have a couple of enums like this, so "just create a list of those values" isn't good. Also this list is a subject of changes, so I want it to be done automatically after compilation.
Don't forget to rate answer, that helped you. It will allow other people find their answers faster.
|
|
|
|
|
You should use the static Enum.GetValues method. It retrieves an array of the names of the constants in a specified enumeration. In your case:
var names = Enum.GetNames(typeof(EnumName));
If you need to get the names as well as their values, use Enum.GetValues.
I hope this helps.
2A
|
|
|
|
|
Yeah. I know this. But I want to filter out values that are combination of two or more other values in the enum. So when I have:
Value13 = Value1 | Value3
I want it to be filtered out.
Don't forget to rate answer, that helped you. It will allow other people find their answers faster.
|
|
|
|
|
In this particular case you need only values that evaluate to a power of 2, so you can do something like this:
List<EnumName> filtered = new List<EnumName>();
foreach (EnumName val in Enum.GetValues(typeof(EnumName)))
{
if ((val & (val - 1)) == 0)
filtered.Add(val);
}
Now filtered will hold all EnumName values except Value13 and Value24 (Which are not powers of 2).
2A
|
|
|
|
|
Great. Didn't thought of this. Thanks.
Don't forget to rate answer, that helped you. It will allow other people find their answers faster.
|
|
|
|
|
[ADDED] Half of this message is wrong, see the replies.[/ADDED]
FYI: the presence of Value13 and Value24 makes your usage of [Flags] inappropriate, see the "guidelines" in MSDN[^]. ]Flags] expects all values to be "bitwise non-overlapping" so if A and B are values, A|B should differ from A as well as from B, which your set does not satisfy. However the compiler does not check this. AFAIK the only implication is on how ToString() will operate.
Luc Pattyn [Forum Guidelines] [My Articles] Nil Volentibus Arduum
Please use <PRE> tags for code snippets, they preserve indentation, improve readability, and make me actually look at the code. modified on Friday, May 20, 2011 8:03 AM
|
|
|
|
|
Maybe I'm to tired, but I don't see how does it brakes those guidelines. I have Value1, Value2, Value3 and Value4 as my enumeration values, and for "commonly used flag combinations" I have:
Value13, that means Value1 OR Value3
and
Value24, that means Value2 OR Value4
Value13 and Value24 mean "Value 1 or 3", "Value 2 or 4", not "Value 13", "Value 24". Obviously, this enum is just an example and in my real code it's more meaningful.
Don't forget to rate answer, that helped you. It will allow other people find their answers faster.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
