C#

FirstPrevNext

Re: Form-Designer-like application needed. Help appreciated. Ron Beyer11-Jun-13 12:40 Ron Beyer 11-Jun-13 12:40  If you just want to set some properties of a control and save it for use later that's a different approach, you don't need to design a forms designer for that, just implement a property window using the built-in PropertyGrid control, then save the edited property values to the database. You can google for C# Moveable Controls and stuff like that, searching on Forms Designer will probably point you in the wrong direction. Re: Form-Designer-like application needed. Help appreciated. Member 1004349811-Jun-13 12:53 Member 10043498 11-Jun-13 12:53  Maybe I wasn't clear enough in my first post, but yes, I don't need to build an application to design forms. What I do need is an application that can load and show on screen real .CS forms created by a developer. And administrator user will be the one using this application. What for? to set some, for example, user-role permissions for any of the visual controls of the form so the final user will or will not be able to see or access those controls when he, the final user, execute that form. So, even though I don't need my app to be able to design forms just like the VS IDE does, I do need it to be able to load/show real VS Forms in a kind-of-designer window that let the Administrator User set privacy properties (using a PropertyGrid of course) for the buttons, textboxes, etc, in that form. I hope it is clearer now. And again, I appreciate your help. -FJ Button acting as Key Jassim Rahma11-Jun-13 5:41 Jassim Rahma 11-Jun-13 5:41  Hi, I am developing a keyboard for using C#. I want to know how can I make the Backspace button invoke a Backspace, Delete button invoke a Delete, etc... Technology News @ www.JassimRahma.com Re: Button acting as Key Richard MacCutchan11-Jun-13 6:26 Richard MacCutchan 11-Jun-13 6:26  I would guess that when you press the backspace button it sends a message containing the key code for Backspace. But your question is not entirely clear. Use the best guess Re: Button acting as Key Thomas Daniels11-Jun-13 6:45 Thomas Daniels 11-Jun-13 6:45  Hi, In Windows Forms, use the SendKeys.Send method[^] or the SendKeys.SendWait method[^] method. These methods send keystrokes to the active application. But normally, if you click on a button on your form, your application is the active application. So, you should create an "unfocusable" form: http://stackoverflow.com/questions/4037250/how-do-i-create-an-unfocusable-form-in-c[^] If you use WPF, have a look here: A Software Virtual Keyboard for Your WPF Apps[^] The quick red ProgramFOX jumps right over the Lazy<Dog>. My latest article: Understand how bitwise operators work (C# and VB.NET examples) My group: C# Programmers Group Changing a CSS attribute in C# Code mrkeivan10-Jun-13 23:15 mrkeivan 10-Jun-13 23:15  Hey guys, Here's the dead, I have different Brands, and each brand has its own color, I keep the code for the color in database, When I load the page for each brand I want this color to be applied to different parts for example the Category Header CSS #CategoryHeader { background-color:#ff6a00; } Since the color can be changed any time I cannot use C# bodyId.Attributes["class"] = "test"; CSS .test { background-color: #000000 !important; } any help is appreciated Thanx Re: Changing a CSS attribute in C# Code Bernhard Hiller10-Jun-13 23:49 Bernhard Hiller 10-Jun-13 23:49  Actually you need different style sheets for your different brands (they could be generated from the data in your database). That style sheet should be the last style sheet to be loaded by your page. vbscript to c# fernando_moca10-Jun-13 18:47 fernando_moca 10-Jun-13 18:47  Hi, i'm new on c#, i have a code from another post, i need to convert to c#, somebody can help me? '*************************************************************************** '* '* Delete Profiles script written by Joe Shonk ( joe@theshonkproject.com) '* Version 1.9 '* '* Syntax: cscript.exe DeleteProfiles.vbs [/H] [/E | /I <profilename>] [/C] [/R] '* [/D <days>] [/L <filename>] [/V] '* '* This script is provided as-is, no warrenty is provided or implied. '* The author is NOT responsible for any damages or data loss that may occur '* through the use of this script. Always test, test, test before '* rolling anything into a production environment. '* '* This script is free to use for both personal and business use, however, '* it may not be sold or included as part of a package that is for sale. '* '* A Service Provider may include this script as part of their service '* offering/best practices provided they only charge for their time '* to implement and support. '* '* For distribution and updates go to: http://www.theshonkproject.com '* '*************************************************************************** On Error Resume Next Const DeleteReadOnly = TRUE Const HKEY_LOCAL_MACHINE = &H80000002 Const SIDExclusionList = "|S-1-5-18|S-1-5-19|S-1-5-20|" '*************************************************************************** '* To add your own profiles to the exclusion list simply add the '* account to the end of the strProfileExclusionList. Note: Each account '* is delimited by a | (pipe) and is all lowercase '* Dim strProfileExclusionList Dim strComputer, strLogFileName, strDocAndSettingsLocation Dim strKeyPath, arrValueNames, arrValueTypes, arrSubKeys Dim i, strHiveExclusionList, strHiveOpenSkipped, strHiveValue Dim strSubKey, strGuid, strUserName, strProfileImagePath Dim dwProfileExclusion, dwSIDExclusion, dwHiveOpenExclusion Dim flgLogFile, flgWriteConsole, flgVerboseLog, flgAllowExecute, flgHelp Dim dwArgCount, strNextArg, strCurrentArg, flgCustomExclusions, flgCustomExMatch Dim strCustomExclusions, dateCurrentTime, flgCustomInclusions, strCustomInclusions Dim flgCustomInMatch, flgExDateMatch, flgDateExclusion, dwDateExclusion strComputer = "." strProfileExclusionList = "|administrator|all users|default user|localservice|networkservice|public|ctx_smauser|ctx_cpuuser|ctx_cpsvcuser|ctx_streamingsvc|ctx_configmgr|" Set objReg = GetObject("winmgmts:{impersonationLevel=impersonate}!\\" & strComputer & "\root\default:StdRegProv") Set objFSO = CreateObject("Scripting.FileSystemObject") Set objArgs = WScript.Arguments strLogFileName = "" dateCurrentTime = now() dwArgCount = 0 flgHelp = False flgLogFile = False flgCustomExclusions = False flgWriteConsole = False flgVerboseLog = False flgAllowExecute = True dwArgCount = objArgs.Count For i = 0 to dwArgCount - 1 strCurrentArg = lcase(objArgs(i)) Select Case strCurrentArg Case "-v", "-verbose", "/v", "/verbose" flgVerboseLog = True Case "-c", "-console", "/c", "/console" flgWriteConsole = True Case "-r", "-readonly", "-read", "/r", "/readonly", "/read" flgAllowExecute = False flgWriteConsole = True Case "-l", "-log", "/l", "/log" If i < (dwArgCount - 1) then strNextArg = lcase(objArgs(i + 1)) If (left(strNextArg, 1) <> "/") and (left(strNextArg, 1) <> "-") then flgLogFile = True strLogFileName = strNextArg i = i + 1 Else wscript.echo "Warning: Log Switch Used but No Log Filename Specified." End if Else wscript.echo "Warning: Log Switch Used but No Log Filename Specified." End if Case "-e", "-exclude", "/e", "/exclude" If i < (dwArgCount - 1) then strNextArg = lcase(objArgs(i + 1)) If (left(strNextArg, 1) <> "/") and (left(strNextArg, 1) <> "-") then flgCustomExclusions = True strCustomExclusions = replace(strNextArg, ",", "|", 1) i = i + 1 Else wscript.echo "Error: Exclude Switch Used but no Argument Specified." flgHelp = True End if Else wscript.echo "Error: Exclude Switch Used but no Argument Specified." flgHelp = True End if Case "-i", "-include", "/i", "/include" If i < (dwArgCount - 1) then strNextArg = lcase(objArgs(i + 1)) If (left(strNextArg, 1) <> "/") and (left(strNextArg, 1) <> "-") then flgCustomInclusions = True strCustomInclusions = replace(strNextArg, ",", "|", 1) i = i + 1 Else wscript.echo "Error: Include Switch Used but no Argument Specified." flgHelp = True End if Else wscript.echo "Error: Include Switch Used but no Argument Specified." flgHelp = True End if Case "-d", "-days", "-day", "/d", "/days", "/day" If i < (dwArgCount - 1) then strNextArg = lcase(objArgs(i + 1)) If (left(strNextArg, 1) <> "/") and (left(strNextArg, 1) <> "-") then dwDateExclusion = cdbl(strNextArg) i = i + 1 If (dwDateExclusion > 0) and (dwDateExclusion < 999999) then flgDateExclusion = True Else flgHelp = True wscript.echo "Error: Invalid Number of Days Specified." End if Else wscript.echo "Error: Day Switch Used but no Argument Specified." flgHelp = True End if Else wscript.echo "Error: Day Switch Used but no Argument Specified." flgHelp = True End if Case "-h", "-help", "/h", "/help", "-?", "/?" flgHelp = True Case Else wscript.echo "Unrecognized option: " & objArgs(i) flgHelp = True End Select next If flgCustomExclusions and flgCustomInclusions then wscript.echo "Error: Cannot Specify a Custom Exclusion List with a Custom Inclusion List." flgHelp = True End if If flgHelp then wscript.echo "Help" wscript.echo "" wscript.echo "DeleteProfiles.vbs - v1.9" wscript.echo "-------------------------" wscript.echo "" wscript.echo "cscript.exe DeleteProfiles.vbs [/H] [/E | /I <profilename>] [/C] [/R]" wscript.echo " [/D <days>] [/L <filename>] [/V]" wscript.echo "" wscript.echo "Command Line Options:" wscript.echo " /C : Write Log to the Console" wscript.echo " /D <days> : Delete Profiles Older than x Days" wscript.echo " /E <profile> : Exclude Profiles from Deletion" wscript.echo " : Wildcard * Supported. Use ',' or '|' as a Delimiter for" wscript.echo " : Multiple Entries. No Spaces Between Entries." wscript.echo " /I <profile> : Only Delete Included Profiles (Wildcard * Supported)" wscript.echo " : Wildcard * Supported. Use ',' or '|' as a Delimiter for" wscript.echo " : Multiple Entries. No Spaces Between Entries." wscript.echo " /L <filename> : Create Log File" wscript.echo " /H : Help (This Screen)" wscript.echo " /R : Run Script in Read Only Mode (No System Changes)" wscript.echo " /V : Verbose Logging" wscript.echo "" wscript.quit End if If flgLogFile then Set objLogFile = objFSO.CreateTextFile(strLogFileName) WriteHeader '********************************************************************************** '* Enumerate a list of loaded Registry Hives. Delimited by the | character strHiveExclusionList = "|" strHiveOpenSkipped = "|" strKeyPath = "SYSTEM\CurrentControlSet\Control\hivelist" objReg.EnumValues HKEY_LOCAL_MACHINE, strKeyPath, arrValueNames, arrValueTypes For i=0 To UBound(arrValueNames) strHiveValue = trim(arrValueNames(i)) strHiveExclusionList = strHiveExclusionList & Right(strHiveValue, len(strHiveValue) - instrrev(strHiveValue, "\")) & "|" Next '********************************************************************************** '* Enumerate a list of known profiles from the registry strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList" objReg.EnumKey HKEY_LOCAL_MACHINE, strKeyPath, arrSubKeys '********************************************************************************** '* Parse through the Profile list and Delete the Registry entries and Files associated to the Profile '* Provided the profile is not listed in an Exclusion list WriteLog "Checking Profile List" WriteLog "---------------------" If NOT flgAllowExecute then WriteLog "READ ONLY MODE. No changes made." If flgDateExclusion then WriteLog "Purge Profiles Older than " & dwDateExclusion & " Days." WriteLog "" For Each subkey In arrSubKeys strSubKey = "" strGuid = "" strUserName = "" strProfileImagePath = "" strSubKey = trim(subkey) If (instr(SIDExclusionList, "|" & strSubKey & "|") = 0) and (strSubKey <> "") then strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\" & strSubKey objReg.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,"Guid", strGuid objReg.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,"ProfileImagePath", strProfileImagePath strUserName = Right(strProfileImagePath, len(strProfileImagePath) - instrrev(strProfileImagePath, "\")) WriteLog "Profile" If flgVerboseLog then WriteLog " SID : " & strSubKey If flgVerboseLog then WriteLog " GUID : " & strGuid WriteLog " Profile Path: " & strProfileImagePath WriteLog " UserName : " & strUserName dwProfileExclusion = instr(strProfileExclusionList, "|" & trim(lcase(strUserName)) & "|") dwSIDExclusion = instr(strHiveExclusionList, "|" & strSubKey & "|") If flgCustomExclusions then flgCustomExMatch = TestCase(lcase(strUserName), lcase(strCustomExclusions)) If flgCustomExMatch then strProfileExclusionList = strProfileExclusionList & trim(lcase(strUserName)) & "|" dwProfileExclusion = 1 End if End if If flgCustomInclusions then flgCustomInMatch = TestCase(lcase(strUserName), lcase(strCustomInclusions)) If flgCustomInMatch = 0 then strProfileExclusionList = strProfileExclusionList & trim(lcase(strUserName)) & "|" dwProfileExclusion = 1 End if End if If flgDateExclusion then flgExDateMatch = 0 If objFSO.FileExists(strProfileImagePath & "\NTUSER.DAT") then Set objFile = objFSO.GetFile(strProfileImagePath & "\NTUSER.DAT") flgExDateMatch = TestDateExclusion(objFile.DateLastModified, DateCurrentTime, dwDateExclusion) Else WriteLog " NTUSER.DAT Does not Exist" If objFSO.FileExists(strProfileImagePath & "\NTUSER.MAN") then WriteLog " NTUSER.MAN Found" Set objFile = objFSO.GetFile(strProfileImagePath & "\NTUSER.MAN") flgExDateMatch = TestDateExclusion(objFile.DateLastModified, DateCurrentTime, dwDateExclusion) Else WriteLog " NTUSER.MAN Does not Exist" End if End if If flgExDateMatch then strProfileExclusionList = strProfileExclusionList & trim(lcase(strUserName)) & "|" dwProfileExclusion = 1 End if End if If (dwProfileExclusion = 0) and (dwSIDExclusion = 0) then WriteLog " Profile OK to Delete" If flgDateExclusion then WriteLog " Profile Matches Age Requirement" If flgCustomInclusions and flgCustomInMatch then WriteLog " Profile Matches Inclusion List" strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\" & strSubKey DeleteKey HKEY_LOCAL_MACHINE, strKeyPath strKeyPath = "SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\" & strSubKey DeleteKey HKEY_LOCAL_MACHINE, strKeyPath strKeyPath = "SOFTWARE\Microsoft\Windows\CurrentVersion\Group Policy\State\" & strSubKey DeleteKey HKEY_LOCAL_MACHINE, strKeyPath strKeyPath = "SOFTWARE\Microsoft\Windows\CurrentVersion\Installer\UserData\" & strSubKey DeleteKey HKEY_LOCAL_MACHINE, strKeyPath If strGuid <> "" then strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\PolicyGuid\" & strGuid DeleteKey HKEY_LOCAL_MACHINE, strKeyPath strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileGuid\" & strGuid DeleteKey HKEY_LOCAL_MACHINE, strKeyPath Else WriteLog " Guid is Blank, Deleting Registry Keys based of Guid has been skipped." End if If objFSO.FolderExists(strProfileImagePath) then WriteLog " Folder Exists - Deleting" If flgAllowExecute then objFSO.DeleteFolder(strProfileImagePath), DeleteReadOnly Else WriteLog " Folder Does not Exist" End if Else If dwProfileExclusion then WriteLog " Profile not Deleted --- Username in Profile Exclusion List" If flgCustomExclusions and flgCustomExMatch then _ WriteLog " Profile not Deleted --- Username Matched Custom Exclusion List" If flgCustomInclusions and (flgCustomInMatch = 0) then _ WriteLog " Profile not Deleted --- Username Did not Match Custom Inclusion List" If flgDateExclusion and flgExDateMatch then _ WriteLog " Profile not Deleted --- Profile is not Older than " & dwDateExclusion & " Days" End if If dwSIDExclusion then WriteLog " Profile not Deleted --- User Hive is currently loaded" strHiveOpenSkipped = strHiveOpenSkipped & trim(lcase(strUserName)) & "|" End if End if End if Next '********************************************************************************** '* Get Document and Settings Directory Location from the Registry strKeyPath = "SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList" objReg.GetStringValue HKEY_LOCAL_MACHINE,strKeyPath,"ProfilesDirectory", strDocAndSettingsLocation WriteLog "" WriteLog "Documents and Settings Path: " & strDocAndSettingsLocation WriteLog "" WriteLog "Checking For Orphaned Profile Directories" WriteLog "-----------------------------------------" Set objFolder = objFSO.GetFolder(strDocAndSettingsLocation) Set colSubfolders = objFolder.Subfolders '********************************************************************************** '* Parse through the directory a check For orphaned profile folders and Delete For Each objSubfolder in colSubfolders strUserName = lcase(Right(objSubfolder.Path, len(objSubfolder.Path) - instrrev(objSubfolder.Path, "\"))) dwProfileExclusion = instr(strProfileExclusionList, "|" & trim(lcase(strUserName)) & "|") dwHiveOpenExclusion = instr(strHiveOpenSkipped, "|" & trim(lcase(strUserName)) & "|") If (dwProfileExclusion = 0) and (dwHiveOpenExclusion = 0) then WriteLog "Deleting Orphaned Profile Directory: " & objSubfolder.Path If flgAllowExecute then objFSO.DeleteFolder(objSubfolder.Path), DeleteReadOnly Else If dwHiveOpenExclusion then WriteLog "Hive Loaded -- Skippped Delete: " & objSubfolder.Path End if If dwProfileExclusion then WriteLog "Profile Excluded -- Skippped Delete: " & objSubfolder.Path End if End if Next WriteFooter If flgLogFile then objLogFile.Close objReg = Nothing objFSO = Nothing objArgs = Nothing '********************************************************************************** '* Deletes All Subkeys and Values within a Given Registry Key Sub DeleteKey(dwHiveType, strDeleteKeyPath) Dim dwReturn, arrDeleteSubKeys, strDeleteSubKey dwReturn = objReg.EnumKey(dwHiveType, strDeleteKeyPath, arrDeleteSubKeys) If (dwReturn = 0) And IsArray(arrDeleteSubKeys) Then For Each strDeleteSubKey In arrDeleteSubKeys DeleteKey dwHiveType, strDeleteKeyPath & "\" & strDeleteSubKey Next End if If flgAllowExecute then objReg.DeleteKey dwHiveType, strDeleteKeyPath If flgVerboseLog then WriteLog " Deleting: " & strDeleteKeyPath End Sub '********************************************************************************** '* Test a List of Wildcard Items Against a Value Function TestCase(strTestCase, strWildCardTests) TestCase = 0 dwAllItems = 0 dwSoftLeft = 0 dwSoftRight = 0 arrWildCards = split(strWildCardTests, "|") For each strWildCard in arrWildCards If strWildcard = "*" then dwAllItems = 1 Else If left(strWildcard, 1) = "*" then dwSoftLeft = 1 strWildcard = right(strWildcard, len(strWildcard) - 1) End if If right(strWildcard, 1) = "*" then dwSoftRight = 1 strWildcard = left(strWildcard, len(strWildcard) - 1) End if End if If strWildcard = "" then dwAllItems = 1 If dwAllItems then TestCase = 1 Else dwLeftOk = 0 dwRightOk = 0 dwOffSet = instr(strTestCase, strWildcard) If dwOffSet then If (dwSoftLeft = 0) and (dwOffSet = 1) then dwLeftOk = 1 If dwSoftLeft then dwLeftOk = 1 End if dwRightOffSet = len(strTestCase) - dwOffset - len(strWildcard) + 1 If dwRightOffSet = 0 then dwRightOk = 1 If dwRightOffset > 0 and dwSoftRight = 1 then dwRightOk = 1 If dwLeftOk and dwRightOk then TestCase = 1 End if Next End Function '********************************************************************************** '* Test Profile Date Against the Current Date. Then Compare Against out Value Function TestDateExclusion(dateTestCase, dateTestCurrentTime, dwTestNumDays) TestDateExclusion = 0 dwNumDays = DateDiff("d", dateTestCase, dateTestCurrentTime) If dwNumDays <= dwTestNumDays then TestDateExclusion = 1 If flgVerboseLog then WriteLog " Profile Age : " & dwNumDays & " Days" End Function '********************************************************************************** '* Log Header Sub WriteHeader WriteLog "---" WriteLog "-- Profile Deletion Script Executed: " & dateCurrentTime WriteLog "---" WriteLog "" End Sub '********************************************************************************** '* Log Footer Sub WriteFooter WriteLog "" WriteLog "---" WriteLog "-- Profile Deletion Script Completed." WriteLog "---" End Sub '********************************************************************************** '* Write String to Log File Sub WriteLog(strString) If flgLogFile then objLogFile.Writeline strString If flgWriteConsole then wscript.echo strString End Sub Re: vbscript to c# Abhinav S10-Jun-13 20:13 Abhinav S 10-Jun-13 20:13  You can do partial conversion using tools you will find on the internet. Try converting the remaining on your own. If you face issues, post them here. Apps - Color Analyzer | Arctic | XKCD | Sound Meter | Speed Dial Re: vbscript to c# fernando_moca11-Jun-13 2:12 fernando_moca 11-Jun-13 2:12  Thanks, i was trying but wasn't works fine :/, and i tried with asp2aspx but only the premium version can converts vbscript to c# :/ Re: vbscript to c# Pete O'Hanlon11-Jun-13 2:37 Pete O'Hanlon 11-Jun-13 2:37  What, exactly, do you want the code to do? I ask this because .NET provides a very rich and robust framework, and it's entirely possible that there are features that it has access to that make converting this pointless. I was brought up to respect my elders. I don't respect many people nowadays. CodeStash - Online Snippet Management | My blog | MoXAML PowerToys | Mole 2010 - debugging made easier Re: vbscript to c# fernando_moca11-Jun-13 2:57 fernando_moca 11-Jun-13 2:57  i want the same funcionality in this vsb script in c#, i was trying to convert it but i'm new on c# so is dificult for me Re: vbscript to c# Pete O'Hanlon11-Jun-13 2:59 Pete O'Hanlon 11-Jun-13 2:59  I'm not going to trawl through a large block of unformatted VBS. What are you trying to accomplish? Tell us what your end goal of this code is. I was brought up to respect my elders. I don't respect many people nowadays. CodeStash - Online Snippet Management | My blog | MoXAML PowerToys | Mole 2010 - debugging made easier Re: vbscript to c# fernando_moca11-Jun-13 3:09 fernando_moca 11-Jun-13 3:09  the goal is, close user profiles from remote servers, with some specific restrictions, all this profiles will be removed on HKEY like profilelist, profileguid, policyguid, etc.., i was trying on c# with registrykey and all of that code, but doesn't works, i have one week searching code on c#, and only code that has a success funcionality is this on vscript, this list all user profile list of the local machine and profiles on domain, etc.., so is the reason that i was trying to convert it :/ Re: vbscript to c# Pete O'Hanlon11-Jun-13 3:19 Pete O'Hanlon 11-Jun-13 3:19  If all you need to do is run this script from .NET, then you can use Process.Start as detailed in this[^] post. I was brought up to respect my elders. I don't respect many people nowadays. CodeStash - Online Snippet Management | My blog | MoXAML PowerToys | Mole 2010 - debugging made easier Re: vbscript to c# fernando_moca11-Jun-13 3:26 fernando_moca 11-Jun-13 3:26  yes i'm doing that in this moment, but more specific, i would like to migrate the funcionality of the vbs script to c#, and have all in a only project, thanks for this time that u are dedicating for this post Need help regarding developing windows service Tridip Bhattacharjee10-Jun-13 9:18 Tridip Bhattacharjee 10-Jun-13 9:18  i often feel people open my PC when i am not in office. so i want to track whenever my pc will be turn on. when pc will be turn on then login screen comes. before entering login detail a mail should be trigger from my win service to me? again when another user login with my credential details then another mail come to me. now the question is how can i track this activity from windows service. windows service has one event called start(). i like to know when start() is called ? the moment someone start the pc ? or after login successfully or after loading desktop successfully ? if i need to send mail after turn on my pc then what i need to do ? also if i need to send mail after giving password then what i need to do ? please guide me in detail. tell me which event i need to work with ? thanks tbhattacharjee Re: Need help regarding developing windows service Richard Deeming10-Jun-13 9:27 Richard Deeming 10-Jun-13 9:27  You can use the built-in task scheduler[^] to run a program when the computer starts up, or when a particular user account logs in. It's not foolproof, since anyone with sysadmin access could disable the task, but they'd also be able to disable or uninstall your service. "These people looked deep within my soul and assigned me a number based on the order in which I joined." - Homer Re: Need help regarding developing windows service Ron Nicholson10-Jun-13 9:52 Ron Nicholson 10-Jun-13 9:52  What Richard said, and change your password. No one should ever use your creds to login to any pc. Re: Need help regarding developing windows service Rob Philpott10-Jun-13 10:09 Rob Philpott 10-Jun-13 10:09  There are few ways to tackle this sort of thing. Firstly, the Window Event Viewer will normally log when users log in without you doing anything. From command prompt type 'eventvwr' and navigate to security. In Task Category look for log on. You'll need admin rights for this. That may give you enough information that you don't need to create a Windows Service. The start override is called when the Service starts, and that will usually be when the computer starts when set to automatic, of when explicitly started when set to manual. If you do go ahead with the service, I would investigate programmatically getting events from the Event Log - there probably will be a hook where you can receive them but I don't know off the top of my head. A simple approach might be to create a little console app that sends an email and make it run when you log in - like things like Skype do. It's a case of adding an entry in the registry in the 'run' section of windows. Regards, Rob Philpott. Re: Need help regarding developing windows service Abhinav S10-Jun-13 20:15 Abhinav S 10-Jun-13 20:15  Windows service is a reasonable approach to try with. There are a number of online tutorials that will hhelp you get started. Pick any one up and build your service. Apps - Color Analyzer | Arctic | XKCD | Sound Meter | Speed Dial How to draw 3D electron model around Atom using XNA?? nada 101510-Jun-13 0:59 nada 1015 10-Jun-13 0:59  I want To Draw number of electrons around the Atom < 3D > using XNA 4 but i failed anyone Can help me ?? Re: How to draw 3D electron model around Atom using XNA?? Richard MacCutchan10-Jun-13 1:48 Richard MacCutchan 10-Jun-13 1:48  nada 1015 wrote: but i failed You also failed to explain what your code tries to do, and what errors or incorrect results you received. Use the best guess Re: How to draw 3D electron model around Atom using XNA?? nada 101510-Jun-13 1:54 nada 1015 10-Jun-13 1:54  all i want to do is to draw a 3d model of electron around a 3d model of atom i need somone help me to think how to write the Code Re: How to draw 3D electron model around Atom using XNA?? Richard MacCutchan10-Jun-13 2:02 Richard MacCutchan 10-Jun-13 2:02  nada 1015 wrote: i need somone help me to think how to write the Code Sorry, but I think you misunderstand the purpose of this forum; please read http://www.codeproject.com/Messages/1278604/How-to-get-an-answer-to-your-question.aspx[^]. Use the best guess

Last Visit: 31-Dec-99 18:00     Last Update: 19-May-24 11:04 Refresh ᐊ Prev1...1537153815391540154115421543154415451546 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.