|
0x01AA wrote: Once upon a time c# was such a beautiful, simply/logical
You could say the same thing about nearly every piece of software today. My OS feels bloated, my compiler IDE feels bloated, my word processor is certainly bloated, even the languages are becoming bloated. 
What happened to 'Keep it Simple'?
Best Wishes,
David Delaune
|
|
|
|
|
Marketing.
They have to motivate selling a newer version.
|
|
|
|
|
Yep,
But just imagine how many bugs could be fixed if we just take a break and stop adding more features. 
|
|
|
|
|
That's why many companies change the business model to SAAS
|
|
|
|
|
Jörgen Andersson wrote: Marketing.
Probably very valid because I believe Microsoft now markets Visual Studio as a product. It has to pay for itself and make a profit. Before I think they were marketing as a tool to increase Windows acceptance. So it was cheaper.
|
|
|
|
|
I love deving IoT because of this.
Real programmers use butterflies
|
|
|
|
|
Well,
The boards you play around with are simply too weak to do much of anything but read sensors. I can't find anything I want to use in the IoT world. Any suggestions?
I have about a dozen Arm SBC I do get some use out of some of those for NAS, DNS and time servers.
My next purchase will be a SiFive RISC-V board[^] just to get early exposure to the instruction set.
Best Wishes,
-David Delaune
|
|
|
|
|
Check out the ESP32 WROVER, but honestly? In Jan. Espressif is officially releasing the ESP32-S3 which is a monster.
It has a ton of GPIO, like the ARM boards. It has a USB port you can program to be anything you want (like a USB HID device), it has at least 2MB of PSRAM, and 512kB of SRAM, 300kB or so of which is effectively available for user stuff. The CPU is dual core, at up to 240mhz. The SPI tops out at either 40MHz, or 80Mhz, I forget. If nothing else, I know one of the busses is tappable at 80Mhz but you're sharing it with the PSRAM I think, and you have to be careful how you use it. There might be a totally free 80MHz SPI bus now, I haven't looked into it. But even 40Mhz will drive a small display, and there are enough pins to drive an 8-bit parallel with plenty of pins left over if you need something faster.
You can program it in micropython or the ESP-IDF using C or C++. Arduino support is coming, maybe by the time they officially ship.
I have a reference board, but I'm not using it because the toolchain is still very preliminary.
Real programmers use butterflies
|
|
|
|
|
|
Yeah, assuming that's garbage collected I don't see the point.
Real programmers use butterflies
|
|
|
|
|
I believe it is, well as far as I know, they use a rather scaled down micro GC that (from what I'm told) does a better job than the full GC in the .net framework.
Of course, this is only what I'm told.
|
|
|
|
|
I have to be very careful in practice about where my RAM is allocated. For example, I have SRAM (fast) and PSRAM (over an 80mhz bus). PSRAM isn't DMA capable, meaning for me to blt bitmaps to the screen requires me to tie up the CPU. So I need to use SRAM to do so asynchronously.
Then you have ISR code, which must be loaded into SRAM, and I doubt you can even make ISR code with .net
No offense, but what exactly are you going to do with a garbage collected managed code framework on something like an ESP32 that couldn't be done on the same platform several orders of magnitude more efficiently without it?
Because nobody has been able to satisfactorily answer that question for me, I have dismissed it as a viable IoT development framework. For now. As time goes on, I'll reconsider my position as the technology warrants it.
Micropython I'm uneasy about, but at least there's a better argument for it, and it's battle tested at this point. As much as I don't like it, it has proven capable enough.
As for me, for now I'll stick with C++, because of all of the C++ ecosystem I can leverage in the IoT world but also because every cycle i don't spend garbage collecting or interpreting script is one more cycle of battery life.
Real programmers use butterflies
|
|
|
|
|
I hear you, and yes I follow your concerns.
What I do know about the nano framework however, is that for me, right now my biggest drawback is lack of drivers for common hardware. For example, I wanted to make use of an HD44780 LCD display, but my displays where all 4 bit with an I2C backpack on them, rather than the full 8 bit one the drivers where designed for.
I have for a large chunk had to write my own shims for the hardware I'm using, but I have to say aside from that I have had no other issues in any of the work I've been doing.
The project is also getting funding directly from Microsoft to help progress it, so that I think counts for something.
To be perfectly honest, I would rather use the meadow platform : Meadow
But right now they only run on their own hardware. Meadow is more mature, not going to deny that, but it's not available to me right now what I'm working on.
As for Nano, as I say, I can't say I've had any issues, but then again maybe I'm not working on the same type of projects you are, nano works largely ok for me, and my increases in productivity come from the fact that I'm using the same language and the same dev environment on both the device, and the device client sides of the equation.
|
|
|
|
|
For doing things like truetype rendering and partial double buffering over SPI (not I2C which is dog slow) you really benefit from DMA, and being able to niggle hardware some. I mean my unoptimized drivers get about 20fps and TFT_eSPI's spi drivers for the same configuration get 30fps. SPI on an ESP32 for 320x240@16bpp tops out at 31fps - just fast enough that the user hopefully doesn't notice your redrawing too much.
However, I routinely deal with 800x480 displays using an RA8875 controller that's not even as fast as most other SPI displays. I can top it out at only 20MHz rather than say, 27. All the extra pixels compounds the problem.
For me to render true type fonts, jpegs, and such reasonably I really need the speed that DMA buys me when it's available.
Real programmers use butterflies
|
|
|
|
|
Ah, well you see that's the difference. a huge amount of what I do communicates with a faster device on the client end that does the display (Automotive electronics)
All I realistically need to be concerned with at the small device end is, does the device read the inputs fast enough, respond to the instructions sent to it fast enough.
In most cases, anything that's time critical is on a GPIO all of it's own, anything that's computed, does so based on input to it's UART, the devices I build are typically sat down in the gunk and crap of the engine block, miles away from the user sat behind the dashboard, and very often each device handles at most only a handful of I/O pins, the most stressful thing I put any of my devices through is upping the serial baud rate
Display is usually sat up on the dash, and has something like an ARM7 with a decent clock speed and good amount of memory sat on it.
For those cases where the engine end really needs to perform, I'll typically deeply something like a PIC Micro and write it's firmware directly in PIC ASM, but where I can get away with it, I do like using the ESP32 and the Nano framework, as the "head end" that has the display on is very often written using .NET/C# on a device that can handle it.
|
|
|
|
|
That makes sense. It hadn't occurred to me to even use an ESP32 in an application like that. It's a bit heavier than what I'd have gone with but then with the ESP32 you get .NET and I suppose battery isn't an issue.
Real programmers use butterflies
|
|
|
|
|
Nope, no battery problems, as the power is taken directly from the automotive electrical system, and I have a LOT of Amps to play with
The biggest problem I have is trying to make things wireless.
When you have something effectively encased inside solid steel sealed assemblies, your pretty much guaranteed to need a wiring harness, and where there is a wiring harness there is capacity for leaks.
Oil Pressure/Temp monitoring is one such case, which makes maintenance a complete PITA.
I would dearly love to make more use of things like WiFi/Bluetooth etc, but there's often just far too much metal in the way.
One thing we did experiment with however, was to use the entire metal encasing as the antenna, but that unfortunately didn't work too well.
What I work on, is all about taking software design concepts such as microservices, and applying them to hardware, we try to make each "unit" as stand alone as possible.
|
|
|
|
|
I noticed that when i feel bloated, everything looks bloated.
«The mind is not a vessel to be filled but a fire to be kindled» Plutarch
|
|
|
|
|
BillWoodruff wrote: when i feel bloated, everything looks bloated
Kinda like everybody's pretty when I'm drunk?
|
|
|
|
|
As a student, I didn't have much money. I was living with a girl then, and we had to cut down on everything - she insisted that we couldn't even spend any money on beer. Jeeez ... being a student with no beer?? But I was obedient.
Then one day she came home having bought makeup for $98.50. I got really mad: You will not allow me even a single beer, and then you go out and spend almost a hundred dollars on makeup! (This is long ago and $100 was a lot more buying power than today.)
Of course she started crying: The makeup was so that I would look pretty to you ...
I made a deep sigh: But ... That's what I had the beer for!
I never saw her again.
|
|
|
|
|
|
the best thing for bloating is a good fart or two. I wonder if there is a way to make software fart.
|
|
|
|
|
Slacker007 wrote: I wonder if there is a way to make software fart.
Easy Peasy. Just lay off everybody that works on the test teams. Stink will follow. 
|
|
|
|
|
You've clearly never read any of my "Debugging Messages" when I'm trouble shooting then...
And yes, I have in the past accidently left one or two in, only to get a puzzled email from a client asking why my software is putting a message box on the screen telling him that it "Just Farted"
|
|
|
|
|
i keep working on the challenge of making my code not flatulent 
«The mind is not a vessel to be filled but a fire to be kindled» Plutarch
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
