|
See Win32 Error Codes[^] for clues. For one thing, Win32 Error 2 indicates that a file could not be found. Secondly, a driver fault is indicated. The line:
"WARNING: Frame IP not in any known module. Following frames may be wrong.
0006f540 00000000 00000000 00000000 00000000 0x77f833c0"
Indicates that the Instruction pointer is referencing a memory address that Windows doesn't recognize as being in use, hence the data there is probably invalid. Executing it will most likely cause a serious failure.
I suspect that a driver has become corrupted; isolating it will be a tedious process. Boot in Step-by-Step Confirmation mode and disable all driver loading except the basics - disk controller, keyboard, mouse, video, etc. If the failure happens on this load, you may have a motherboard or firmware (BIOS) problem. If the problem doesn't recur, boot again and enable loading of a few drivers, then wait for a failure. If none occurs, reboot again and add a few more drivers to the allowed set, repeating this procedure until a failure happens. Go back a step and enable the most recent group of enabled drivers one at a time to determine which one causes the failure. Replace that driver from the original media or with an updated version compatible with your OS version.
You might also have a version conflict among the many dlls used by Windows, but the error logs don't look like that's the problem this time. Running SFC from the Start/Run menu may reveal something useful.
"My kid was Inmate of the Month at Adobe Mountain Juvenile Corrections Center" - Bumper Sticker in Bullhead City
|
|
|
|
|
Sad, sad day...
Microsoft (R) Windows Debugger Version 6.3.0017.0
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [C:\WINNT\Minidump\Mini070904-02.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Symbol search path is: C:\WINNT\Symbols
Executable search path is:
Unable to load image ntoskrnl.exe, Win32 error 2
Windows 2000 Kernel Version 2195 (Service Pack 4) UP Free x86 compatible
Kernel base = 0x80400000 PsLoadedModuleList = 0x8046e8f0
Debug session time: Fri Jul 09 19:19:50 2004
System Uptime: not available
Unable to load image ntoskrnl.exe, Win32 error 2
Loading Kernel Symbols
.......................................................................................................
Loading unloaded module list
..........
Loading User Symbols
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
Use !analyze -v to get detailed debugging information.
BugCheck A, {a668c4d0, 2, 1, 80448ed8}
Unable to load image SYMEVENT.SYS, Win32 error 2
*** WARNING: Unable to verify timestamp for SYMEVENT.SYS
*** ERROR: Module load completed but symbols could not be loaded for SYMEVENT.SYS
Probably caused by : SYMEVENT.SYS ( SYMEVENT+4a7e )
Followup: MachineOwner
---------
kd> !analyze -v
*******************************************************************************
* *
* Bugcheck Analysis *
* *
*******************************************************************************
IRQL_NOT_LESS_OR_EQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: a668c4d0, memory referenced
Arg2: 00000002, IRQL
Arg3: 00000001, value 0 = read operation, 1 = write operation
Arg4: 80448ed8, address which referenced memory
Debugging Details:
------------------
WRITE_ADDRESS: unable to read from 80483450
unable to read from 80482ea8
unable to read from 80482d78
unable to read from 80475234
unable to read from 80482d90
unable to read from 80482ea4
unable to read from 80475238
unable to read from 80482f64
unable to read from 80483420
a668c4d0
CURRENT_IRQL: 2
FAULTING_IP:
nt!MiRemovePageFromList+55
80448ed8 ?? ???
CUSTOMER_CRASH_COUNT: 2
DEFAULT_BUCKET_ID: DRIVER_FAULT
BUGCHECK_STR: 0xA
LAST_CONTROL_TRANSFER: from 804494c9 to 80448ed8
TRAP_FRAME: bd1b4938 -- (.trap ffffffffbd1b4938)
ErrCode = 00000002
eax=649b6a99 ebx=ffffffff ecx=818d7000 edx=81a56e20 esi=818d6fe8 edi=80474c30
eip=80448ed8 esp=bd1b49ac ebp=bd1b49ec iopl=0 nv up ei ng nz ac pe cy
cs=0008 ss=0010 ds=0023 es=0023 fs=0030 gs=0000 efl=00010293
nt!MiRemovePageFromList+0x55:
80448ed8 ?? ???
Resetting default scope
STACK_TEXT:
bd1b49b4 804494c9 863b3c28 80442b78 e39610a4 nt!MiRemovePageFromList+0x55
bd1b49bc 80442b78 e39610a4 fffff000 004884d0 nt!MiRemoveAnyPage+0x6f
bd1b49ec 804425e1 ffb977c0 863b3c7c 00001000 nt!MiResolveMappedFileFault+0x319
bd1b4a18 80441960 00000000 cfbe909c c033efa4 nt!MiResolveProtoPteFault+0x128
bd1b4a60 8044ad48 00000000 cfbe909c c033efa4 nt!MiDispatchFault+0x13d
bd1b4aac 80447c52 00000000 00000000 00000000 nt!MmAccessFault+0x682
bd1b4adc 8040dbc8 cfbe909c 00000000 ffba1028 nt!MmCheckCachedPageState+0x28e
bd1b4b9c 804c971a ffba1028 0002909c 00000400 nt!CcFastCopyRead+0x1d5
bd1b4c20 bd050a7e ffba1028 bd1b4cfc 00000400 nt!FsRtlCopyRead+0x1c9
WARNING: Stack unwind information not available. Following frames may be wrong.
00000000 00000000 00000000 00000000 00000000 SYMEVENT+0x4a7e
FOLLOWUP_IP:
SYMEVENT+4a7e
bd050a7e ?? ???
SYMBOL_STACK_INDEX: 9
FOLLOWUP_NAME: MachineOwner
SYMBOL_NAME: SYMEVENT+4a7e
MODULE_NAME: SYMEVENT
IMAGE_NAME: SYMEVENT.SYS
DEBUG_FLR_IMAGE_TIMESTAMP: 3f31ac37
STACK_COMMAND: .trap ffffffffbd1b4938 ; kb
BUCKET_ID: 0xA_W_SYMEVENT+4a7e
Followup: MachineOwner
---------
|
|
|
|
|
This is so frustrating, because I'm good with computers and I take good care of this on. The only damn reason I'm using windows is so I can play counter-strike.
|
|
|
|
|
This looks to me like pesky hardware failure.
The double fault above is particularly indicative - essentially, it couldn't even blue screen [edit]/trap the exception[/edit] properly.
Verifying a solution will be tough.
You could remove the paint and slip a new machine underneath, but that seems overly pessimistic.
I wonder if you could monitor the CPU temp somehow. I have seen machines bs when their fans got stuck, and these are the sort of [edit]useless[/edit] bugchecks you get. If we had a graph of CPU temp redlining, or not, it might give us something to work with.
A colleague had a open box at the office that would bs if you touched the ram. Often, we would taunt him a second time! 
I leave you now with some pithy quotes:
"If you would see the invisible, you must look carefully at the visible" Santayana
"Eliminate the impossible, and all that is left, however improbable, must be the truth" S. Holmes.
"The Force Luke... use the Force" O.Kenobi
Whatever. Keep us posted, and good luck.
|
|
|
|
|
Hi all..
I've installed an IIS WebServer in a server and all the users in the LAN must be able to access that.When we are trying to develop a web application and run it on a different system,It is posting an error saying "Error while trying to run project:Unable to start debugging on the web server.Access is denied"
Though i've given debugger permissions for all on the server,its not working.can any one help me out in this issue.
|
|
|
|
|
|
My ASP.NET web applicaton includes a window media player (wmp) object. I'm using that wmp object to play a .wmv file in the network share folder.
something like
<object style="Z-INDEX: 0; LEFT: 0px; RIGHT: 0px; TOP: 0px; BOTTOM= 0px; WIDTH= 100%; HEIGHT= 100%" classid="clsid:6BF52A52-394A-11D3-B153-00C04F79FAA6" id="winMediaPlayer">
<param name="URL" value="\\192.168.100.100\sharefolder\video.wmv" />
Form1.winMediaPlayer.controls.stop();
However, since at the moment I can not include the username/password to access the folder in the url, Windows Media Player gives an error message
"Windows Media Player can not copy or play the file because the server denied access to it. Verify that you have access rights to the file, and then try again".
Note that no authentication window appeared so that I could authenticate. wmp simply gave the above error message. That is the reason I want to include the username and password in the URL.
Is it possible to include the username and password within the URL \\serverIP\sharedFolder\filename.wmv ?
I know how to do that in a ftp or http URL such as ftp://username:password@serverIP/filename http://username:password@serverIP/filename.html, but not with the above URL.
Thanks.
|
|
|
|
|
I want to format my win98 and install it again. I have a dial up connection on it which I forget its password. I want to use it again after I format/install myy win98. I know some utility like pwl tool or unlock password which I can get that password, but I can't find them. Could someone please give me FREE download of one of these utilities.
Mazy
"One who dives deep gets the pearls,the burning desire for realization brings the goal nearer." - Babuji
|
|
|
|
|
How about your ISP? if it is possible you could ask your ISP for your password. Once you have it, you could proceed your task.
Roath Kanel
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
i mean upgrading as of releasing patches, giving support, etc
Anybody know anything about this?
this made me wonder about that:
<url>http://user.cs.tu-berlin.de/~normanb/
|
|
|
|
|
|
This news article[^] from April says that Microsoft will be working on Windows 2000 SP5 once XP SP2 is released (although there's probably quite a bit of parallel running). An interview with Bob Muglia[^] confirms what will be in SP5.
Extended support continues until 2010 - see the Lifecycle Support Policy FAQ[^]:
"Extended support includes all paid support options and security-related hotfix support that is provided at no charge. Hotfix support that is not security-related requires a separate extended hotfix support contract to be purchased within 90 days after mainstream support ends. Microsoft will not accept requests for warranty support, design changes, or new features during the extended support phase."
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Hi, i have a problem with my outlook express and outlook. I create new account for an e-mail system, i choose POP3/SMTP account type from the screen wizard. I type my user name and password. I also type pop.mail.yahoo.com and smtp.mail.yahoo.com for POP and SMTP. But when I connect to get an e-mail the machine is asking me many time to fill the information about user name and password. Does anyone know about this problem?
Roath Kanel
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
I have a harddisk which has 2 partitions. The first one C:(active partition) contains Windows 2000. Now i wish to move this OS to the second partition D: and make my computer boot from this partition. Is it possible? If so, how should i go about doing it?
<font=arial>Weiye Chen
When pursuing your dreams, don't forget to enjoy your life...
|
|
|
|
|
You'll have to reinstall Windows, and repartition the drive to make D: the primary partition. Extended partitions can be renamed, but not the boot partition. It gets really interesting on multiple drive systems - mine, for instance, boots to drive J: because of the peculiar arrangement of primary and extended partitions I had on the existing drives before I reinstalled Windows. Why do you want to make this move?
Some people think of it as a six-pack; I consider it more of a support group.
|
|
|
|
|
I'm hoping someone knows enough about the history of Windows to explain some things. First, why would trackbars send WM_SCROLL messages? Even if they were going for a sort of backward compatibility that would have allowed programs that used scrollbars as trackbars to be upgraded just from resource changes, it seems to me that trackbars could have supported a mode that would have allowed them to send messages of a type that frameworks wouldn't already use for scrolling. Why did they make it so hard to use?
Also, the MSDN documentation says that TB_THUMBPOSITION is "WM_LBUTTONUP following a TB_THUMBTRACK notification message." This message would actually be useful if it were sent when the trackbar's position were updated by the keyboard. Instead, I have to check for every message except TB_THUMBTRACK and see if the position is different from my last recorded position to decide when a lasting adjustment to a thumb position is made. Why didn't they make TB_THUMBPOSITION work for that?
Nathan Holt
|
|
|
|
|
I'm currently running Windows XP on a LAN.
Using the OS ability to share folders and drives, I can enable my collegues to gain access to various parts of my PC. However I don't seem to be able to do this for mapped networked drives:
+ My Documents
- My Computer
+ (C)
+ DVD Drive(D)
+ (F) \\Somewhere\Somehow\
+ (G) \\Somewhere\Somehow\
+ (H) \\Somewhere\Somehow\
+ (I) \\Somewhere\Somehow\
So, from the above example, I can share my 'C' and 'D' drives and even parts of the 'My Documents' folder; but I cannot enable others to see my mapped 'F', 'G' etc, networked drives. Is there anyway that this can be done?
I Dream of Absolute Zero
|
|
|
|
|
If you can it is a bug in windows, at least by some arguments. Just because you have access to something does not mean you should be allowed to share it. Others who want access should get it from the origional server.
Note that there isn't much consences in the security community over this. However Microsoft appears to have taken the above position, and overall I'd say it is a good decision.
|
|
|
|
|
Hello, I have tried unsuccessfully on many sites to find the answer to this so kudos if you have any insight.
I am using schtasks
schtasks /Create /S WS2 /RU Administrator /RP Foobar /SC ONSTART /TN MyTask /TR C:\Admin\RunMe.bat
to create a task on a windows xp workstation remotely that runs a SYSTEM boot up. When I create the task remotely, occasionnaly it works fine, but usually i get a:
"trust relationship for this workstation and the primary domain failed"
error. I believe this might have something to do with the task trying to run before the network is fully set up etc, or somethign funky with active directory. If I run the task immedietly it works fine, only when I try to run the task on start, and only occasionally. The funny thing is, when I create the task I use the local Admin username and password, but I think it may fail because it seems to try to authenticate the credentials that I used to log into the machine to create the task FROM. Anyone know why this is happening and how to fix it?
thanks
steve
|
|
|
|
|
Try to read the following article from Here[^]
it might give you some idea.
Roath Kanel
APO-CEDC
Save Children Norway-Cambodia Office
|
|
|
|
|
On a client machine I've been unable to install any Windows Update since 6/10/04. It's Old Faithful, the trusty Pentium Pro 180MHz machine I built for Christmas '95, freshly reformatted and reborn with a clean installation of Win2K Pro and little else. SP4 was applied over the LAN from the server, MSDE from the CD with SQL Server SP4 installed from the server. Nothing else is on it.
Windows Update reports 9 Critical and 5 Windows Updates available - all fail to install, as a group or separately. Update.log shows that all were downloaded with a CRC error (Error 0x80070017). Repeatedly. It's unlikely to be a memory error, as Windows is running nicely, no quirky behaviors (other than the known ones). And the various utilities that come with it are all working perfectly. The disk drive checks out as undamaged, too.
Any ideas?
Some people think of it as a six-pack; I consider it more of a support group.
|
|
|
|
|
You could try downloading the updates from the KB article page (ie the standalone update) and see if they will install.
Matt Newman
What is your malfunction? - Dangeresque, too?
|
|
|
|
|
Roger, just in case there is a memory problem that hasn't raised it's head at a time you were around try MemTest86[^] or DocMemory[^].
Other than that I'll come over and we'll go round and see Billy Boy and get things sorted.
Michael Martin
Australia
"I controlled my laughter and simple said "No,I am very busy,so I can't write any code for you". The moment they heard this all the smiling face turned into a sad looking face and one of them farted. So i had to leave the place as soon as possible."
- Mr.Prakash 24/04/2004
|
|
|
|
|
Michael Martin wrote:
I'll come over and we'll go round
Sounds good to me, Michael. When are you arriving? If you're coming in from the east, tell the pilot to turn left at Las Vegas. I'd come to visit you, but Australia doesn't want me. I've taken the test online, but like everyone else, they don't want anyone over 40.
Some people think of it as a six-pack; I consider it more of a support group.
|
|
|
|
|
Roger Wright wrote:
Sounds good to me, Michael. When are you arriving? If you're coming in from the east, tell the pilot to turn left at Las Vegas.
The one and only time I made it to the US it was via Los Angeles and then on to Boston. So I take it I would have to turn right at Las Vegas.
Roger Wright wrote:
I'd come to visit you, but Australia doesn't want me. I've taken the test online, but like everyone else, they don't want anyone over 40.
Can you point me to this online test? I would like to show it to some of the wankers who work in the other departments of our unemployment system. A chunk of the useless scum to wade through my Work For the Dole scheme can't write English and can't speak it very well. Have f*** all education and absolutley no brains and only seem good for producing more brain-dead drains on society. If you can't get in how do these ignorant c***s. Heaps of them are over 40.
Michael Martin
Australia
"I controlled my laughter and simple said "No,I am very busy,so I can't write any code for you". The moment they heard this all the smiling face turned into a sad looking face and one of them farted. So i had to leave the place as soon as possible."
- Mr.Prakash 24/04/2004
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
