|
Hi, I'm having the same problem. Did you solve this?
/=/=/=/= Sagmam =\=\=\=\
|
|
|
|
|
I am trying to pass data between text boxes and can only get it to happen one-way. I have formA and open formB. Both forms are open and have textboxes on both. I can create a command button on formA to get the text from a text box on formB, but when I create a command button on formB to push the text back to formA it error out with no instance of object.
I dim frm as formA and get to see the properties and controls of formA. Using a statement like
me.frm.textbox1.text = me.formB.textbox2.text
Any suggestions??
Rob
|
|
|
|
|
You need to give formB a way to reference formA. One way of going about this is to add a private field of type formA to formB and then pass the calling instance of formA to formB in its constructor:
(In formA...)
<br />
dim frmB as new formB(Me)
(In formB...)
<br />
Private frm as formA<br />
Public Sub New(ByVal frmRef as formA)<br />
frm = frmRef<br />
End Sub
Then, in formB you can say frm.TextBox1.Text = "Howdy from formB!"
As an aside, you may want to reconsider the way you are designing your app. It might be a better idea to add public properties to your forms and update the display with these properties than to allow direct access to the controls from other classes. This would make it a lot easier to alter your classes in the future.
For example, as it stands now, if you decide that you want to use a combo box instead of a text box you will have to change the code in both forms instead of just the form that is implementing the change.
Charlie
if(!curlies){ return; }
|
|
|
|
|
Thanks Charlie. I made the Dims Public and it works that much better.
Bob
|
|
|
|
|
I'm glad you got it working, but unless this is a throw away app, you may end up kicking yourself later when you decide to change the layout of your UI. A little extra coding now to encapsulate your classes will save you a lot of coding later.
However, if you expect never to touch it again once it's done, public fields will work fine.
Charlie
if(!curlies){ return; }
|
|
|
|
|
Hi,
I'm trying to run a script on a remote machine using WshRemote object. I'm getting a Permission denied error (Err No:800a0046).....i don't know how to configure the remote machine...Or am i missing anything else...(assume i hv full control over the remote pc and can change settings as i wish)
the foloing is the segment of my code that fails
................
Set Controller = WScript.CreateObject("WSHController")
Set RemoteScript = Controller.CreateScript("test.vbs", "builder")
'builder - name of the remote machine
WScript.ConnectObject RemoteScript, "remote_"
RemoteScript.Execute
.................
.............
Please help me i've to get out of this soon
Thanks,
East
|
|
|
|
|
The error message would lead me to believe that you DON'T have full rights to the target machine. It looks like your process is logging into the target machine as Guest.
RageInTheMachine9532
|
|
|
|
|
Ok, lets say you wanted to create a reusable class to communicate with a SQL database. This class has a method called "OpenConnection" wich accepts an aritrary amount of parameters buy you want one of these parameters to be an enumeration of the avialable SQL servers. In other words, you want a drop down list of all servers available at design time. A dynamic enum within the class would work great buy I dont know if it is possible. Is there any way to accomplish this?
|
|
|
|
|
Enums are simply a cleaner and more maintainable version of constants. If you were to create an enum at runtime (which is possible, using dynamic compilation or Reflection.Emit) what exactly would you do with it? How would you test for it in your calling method?
Is there a reason you method can't accept a string array which contains the names of your servers as a parameter?
Charlie
if(!curlies){ return; }
|
|
|
|
|
Well i don't really know whether i should be here, but i'm just after some advice really. I'm 18yrs old, and am studying C at the moment, which i'm finding challenging to say the least. I'm probably going to Leeds University to study Computer Science later on this year, and am just wondering if C and VB are the best languages to start off on? - This is what i've heard. I'm interested in gaining a grasp of object orientated stuff, as well as a more general purpose code, like C.
If anyone can shed any light on this, or just offer me some friendly advice to a beginner-programmer, then please please get in touch.
llitanzios85@hotmail.com
Thanks so much.
Lewis.
|
|
|
|
|
If you really want to learn programming.. you need to learn a real fully object oriented language like C++...
VB6 is great but it teachs bad programming habits..
understanding C++ and object oriented programming well will help you learning C# , VB.NET later.
|
|
|
|
|
Lewis:
I too would not recommend VB. It doesn't do OOP well and you will want to switch to something else.
If you are having a challenge with C then C++ is not going to be easier. I suggest starting with Borland Turbo Pascal (or at least some version of pascal) which is what most CompSci majors start with and have for over 20 years t most universities. It seems to be a good language to learn on. I myself started with Fortran but that was a long time ago...
Turbo Pascal can be written OO or not so after you learn the basics of programming you can move on to OOP.
C is also great but personally I would recommend learning C and C++ as a second/third language. I'm sure there are some who can dive right in and will disagree with me but for most beginners Pascal has earned the mantle of being the language of educators.
Good luck.
CD.
|
|
|
|
|
I would recommend learning C first, and then C++. Its a very logical manner to learn the two probably most important languages you could learn. They are both fairly complex, but if you know them well, development for Windows and *nix systems gets infinitely easier. VB isn't even really a OO language, it just is a bastardization of OO, its primary goal being to "protect" you from yourself. VB is ok for very small, quick programs, but programming a large project in VB is almost unmanageable.
|
|
|
|
|
I use outlook send Email,how to know the Email Send success or fail?
|
|
|
|
|
You can check to see if the mail was successfully posted to YOUR mail server, but you can't determine if the send to the recipient was actually successfull. This would require you to monitor your mailbox for any messages that came back from the destination server saying that the delivery was unsuccessfull. This is also complicated by the fact that not every mail server will send a reply at all, and not every mail server will send the same format for a delivery failure message.
RageInTheMachine9532
|
|
|
|
|
Hi Everybody,
Wishing you a very Happy and Prosperous New year.
I've a question on data grid control.I want to customise this control by adding a column which has a combo box as we have a textbox or check box column in normal data grid conrol.Can any one give me the solution for this,Please.
Thnx in advance,
Nachiket
|
|
|
|
|
i need to know how to get the windows and ICQ directory for a program can somebody help me with that?
|
|
|
|
|
|
got problem and want to know how can i develop a windows application using vb.net whose job will be transfer file from one machine to another machine.so please
tell how could i do it using winsock in vb.net.
tbhattacharjee
|
|
|
|
|
You shouldn't user WinSock, instead use System.Net.Sockets... If you are not familiar with these, there are a lot of articles on that namespace here
greetz 
*Niels Penneman*
Software/Dev Site
Personal Site
|
|
|
|
|
i want to develop a windows application using vb.net whose job will be transfer file from one machine to another machine.so please
tell how could i do it using winsock in vb.net.
tbhattacharjee
|
|
|
|
|
str=insert into tbl(datermdate) values("& format("{hh:MM:ss}",textbox1.text)
dim da =new sqladapter(str,cn)
da.fill(ds,"tbl")
I am trying to insert a value into table tbl from textbox where I am giving only the time in the format 2:4:34.But it is taking as datetime value and not as time.Kindly advise
|
|
|
|
|
Hey,
This is my first post here so lemmy start with thanks to all the contributors here. I have learned allot from the code hosted here.
My problem is with system.web.mail.
When I try to import system.web.mail with (Imports System.Web.Mail) I get squiglys telling me that "namespace or type (mail) for imports system.web.mail cannot be found.
I have searched both here and on msdn and found examples useing..
Imports System
Imports System.Web.Mail
and have try to copy/paiste them into visual studio as both windows application and console application and always get the error.
Is it that my library is incomplete or has this namespace been replaced by something else or what?
Thanks in advance for you're help
EDIT: If it helps anyone to see what I meen here is a link to the namespace info on msdn.
Also I should have mentioned that I tried calling smtpMail.send useing the full path (System.Web.Mail.smtpMail.send() ) and it still sais it doesn't exist. 
2 U.S. coins equal 30 cents and one is NOT a nickle. Hmm..
|
|
|
|
|
Add a reference to System.Web in your project
Charlie
if(!curlies){ return; }
|
|
|
|
|
I can import system.web and can also reference it from inside other classes etc. the squigly lines show up when I add .mail or when I try to use anything or these dudes (MailAttachment MailFormat MailPriority
MailEncoding MailMessage SmtpMail )
I admit I am a vb.net newb but I have checked and rechecked my syntax and spelling etc even going as far as to copy and paste example code from msdn and even downloaded some project files useing the class and always get the squiggly lines and compile time errors.
Its like it isn't there. Is there a way to download the full library? I'm guessing my library is incomplete or corrupted. I just installed a fresh visual studio .net enterprise archetect from an unopened retail box. (still in the plastic)
For example I can start a new visual basic - console application and paiste the code directly from this msdn page and get the same problem.
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/cpref/html/frlrfsystemwebmailsmtpmailclasstopic.asp
2 U.S. coins equal 30 cents and one is NOT a nickle. Hmm..
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
