Comments by Gbenbam (Top 200 by date)

I created my own chm file with HelpNDoc. Are you saying it is not necessary to initialize help in WinMain function. Actually my code successfully opened the chm file and launched help from the help menu, so I simply left it at that even though it failed to launch the chm file for context help. Because I did not know the implication of this, I decided to come here.

It is unfortunate, I took a reasonably long time to write you a reply of why I think I should proceed with my present effort having read through your response. But , I lost it, I am unwilling to re-write such a lengthy post ON MY SMARTPHONE. Had you read my lost response, you would have whole heartedly agreed with me that my innovative approach to it is wise and is in the middle of road. I may still write it from my laptop though.

But, that's where I got this function from, there is absolutely no code example there and no specific, that i device was mentioned there that's why I came here. I need code example to help understanding.

Please, by pragmatic, I mean an approach that will guarantee that I make money and also not loose customers.

I apologize if I seem to be wasting your time, but , can you tell me in as few words as possible your pragmatic suggestion? I am so sorry , I did not get it your last reply.

Okay, can you explain it's usage to me using hard disk and motherboard respectively?

Okay what is your pragmatic suggestion?

You mean I should initialize it when I try to launch help? So, when do I uninitialize it?

I have added the relevant code. Perhaps you should take a look at it.

I have added the relevant code. Perhaps you should take a look at it.

I have added the relevant code. Perhaps you should take a look at it.

Thank you.

I don't think that will work dump it this google drive location:

https://drive.google.com/drive/folders/1edgHHWJcknOlJnf7rXu3NmmtGtG0URKP?usp=sharing

Thank you. I appreciate your assistance. I will do that right away.

I have searched again and again.I could not find an email link there. Can you give me some more guidance?

What about resolution? Of course my function wires successfully . to printer. The issue is that what was printed is not a replica of what was displayed on the screen because of differences in resolution.

For instance, I use the GDI- function drainage which draws the image as desired to windows without hassles but the exact same function drew something way way bigger on printer. I had to read documentation long enough to find out that GDI+ graphics function can be set to draw u device units like millimetre . Setting display unit of graphics class resolved the issue, but not completely. The position of the images were not a exact replica of what was displayed in that they were not drawn to perspective in terms of positioning. I had to add printer specific codes.

No it's winhtml help.

I sure know about mapping modes. See my response to Rick York above.

I currently write write to window dc using double buffering, but write direct to printer. But the printed version vision is not a replica of the window version. Users might be displeased. So, i am thinking to use double buffering for printing too, but I want to know how to handle difference in resolution issues. I felt using stretch but to write from a window compatible dc to printer using a scale factor that factors in resolution might work. What do you think?

Nothing ventured, nothing gained. All one need do is think like the users who want to bypass ones protection. That's the secret to beating them all.

A licence is not a password. Hashing it may not be the best. You need to know when the licence has reached its expiry date. Encrypted data is not just data that identifies a system. It also contains information about the LICENCE itself. If one hashes the information about the LICENCE itself , how does one know if it is still valid, if it is date based.

I'll encrypt it. Aes encryption. Programmatically I will decrypt and compare with existing hard hardware info.

Is there any commercially available protection that you know.

I checked their official site. They have a Google groups mail for reporting errors and asking for help.

This sounds like bad news to me. So, what do you suggest?

The tone of his reply was hash. There are a billion and one more pleasant way of saying the same thing. It is either that he was being deliberately hash or he is not the best in the use of language. You should be pleasant to strangers especially if the have not offended you or mean you no harm.

By the way, your suggestion of contacting the authors of the library on GIT hub is a good one. I will explore that option additionally, but, hey, you were too harsh! Do endeavour to always soften your tone as much as possible. We are not enemies. You can say the same thing in a billion way, it all a matter of approach. Always prefer a positive and friendly approach.

I have actually unplugged the compiled dll and commented out the encryption and decryption codes so as to be able to progress in my development work. I will plug them back in and share the error message shortly.

I remember that I tried to use this hard disk serial number anti-piracy scheme in the past and found out from multiple testing that while all branded computer system hard disk and all laptop hard disk have serial number, cloned or computers (or personally assembled computers) hard disk do not have serial numbers at all. So, I decided to use either processor or motherboard hard disk. Years back , I asked here on code project how to retrieve the motherboard serial number. I was told how to do so but was informed,also, that not all motherboards have serial number. I was advised to use Mac address because it is always there, but unfortunately it is hackable. The fellow in question went on to share with me a code on how to get mac address. That code is still here on code project. Although, I went on to use that MAC address-based anti-piracy scheme, I wanted to avoid the possibility of people by-passing my anti-piracy scheme by hacking the MAC address. This your response has made me to remember why I eventually decided against using a hard disk based anti-piracy scheme.

I may have to go back to that MAC address scheme and focus more on encryption.

By the way, isn't it possible one or more of the authors of the library is on code project. It seems you have a very low estimation of code project.

Do all motherboards and processors always have serial numbers?

Well in this particular case, the hard disk did have a serial number which I retrieved using WMI. The problem is that WMI some times have issues. One have to couinnitialize the main thread one and uninitialize it one at the end of the program. For that and other reasons I decided to use deviceiocontrol.

Come on man relax! Life is easy. Someone might know a rule of thumb for doing this. No mortal knows everything. That is why we interact and share. One may have learned something by experience over a long period of time or after a long period of time. This makes such candidates for helping others get out of the time quagmire. Don't be hash, we are not enemies. Surely, you understand use of language. I wish you a pleasant day.

If use Direct2D API will I have to replace GDI functions like ellipse and rectangle with Direct2D versions. I am asking because my code uses GDI functions heavily.

Your solution and link are quite revealing. I would like to know how to convert Device independent pixels
to millimeters. This is because the first thing my application does is to find the value of a millimeter in pixels ( by using GetDeviceCapps to get size of the screen in pixels then in millimetres and using the two values to calculate the value of a millimeter in pixels. All lengths are then given in terms of the calculated one-millimeter-pixels.)

Thank you for your assistance. The code is now working properly.

It turned that the failure is due to DOCINFO structure rejecting the string wstJobName. I replaced it with a literal and the code worked.

Please, how can one do this: "Last but complicate: write all hdc to bitmaps with counter or timestamp". Do you mind expantiating?

I'll give another thorough look though.

Yes the function returns valid Unicode string.

All parameters in the he DOCINFO structure are valid. The code were I set their value is already posted above. If you wish, you may check it to see if their is something I did wrong but did not notice.

I check GetLastError to see what it will return.

It returns a value less than 1. It never accesses the missing codes.

Okay thanks. Using notepad++ has solved the problem already though.

Thanks for the encouragement

I have seen all the pages. None worked. No advanced save option on vs20220.

The addon listed will not download no matter how many times I tried.

Icould not find advace save option on visual studio 222

Yes,Iknow.How do I correct that?

I have seen that page already. How does it solve the problem.

This code worked like charm for this question.

Okay, I understand completely now. Thanks so much.

Thanks a billion times.

So, if I get you right, pVpstr is a global variable. I felt so because it was not referenced anywhere earlier in the code. Am I right?

Thank you. I appreciate your assistance.

Sorry, I don't understand this statement in the summary of your second code:

You still paint into
the full viewport of your Window. So the first line displays at Y-offset 0, and the first character at
X-offset 0.


If fist line displays at Y-Offset 0, and first character at X-Offset 0, what then is the relevance of nLine and nChar?

Although I already have an excellent answer below, I will appreciate other perspectives or solutions for deeper understanding. Others should not simply back off because of the excellent solution1 below. Besides, it uses a paradigm that is completely new to me .You own solution could have the same paradigm as mine present paradigm.

Wow! This is amazing! I am overwhelmed. This is a completely different approach to what I have always known. But I have two questions , one concern and two request.

1. Why is it your Onscroll program does not use ScrollWindow Function. Is it that it doesn't need it or it is an oversight on your part.

2 . I don't understand the line:

pVpstr->size())

I could not find where that variable was defined in the code .


My concern is this: my program does not really write characters. It renders graphics which can be positioned anywhere arbitrarily.

My first request is this: can you kindly help with the accompanying WM_SIZE and WM-SIZING codes.

My second request is this: could you be kind enough to show the corresponding WM_PAINT program. It will help me understand well enough how to adapt the code to my need. Besides, I finally came to term with your assertion that all primary device context message should be done within WM_PAINT. I am still trying to resolve the handling of WM_PAINT message for my application. I will appreciate it if you can illustrate your perspective with a code especially one that would represent the accompanying messages to code to this OnScroll program.


Do pardon me for being such a border

Can you expatiate on the this?

You've been a sour




You've been a very great source of help to me.I value you so much. In fact, ,I owe you a great debit of gratitude for your various assistance in the past . But, in spite of the fact that this your solution educates one on the process of debugging, this your solution is completely irrelevant to my question.

I take it that you have never used GetOpenFilename before.

Okay, I see you have given me a different string that allow selection of all files. Kindly ignore my last comment. I
Posted it without actually understanding your solution. I think I will delete it instead so as not to confuse others. Don't bother if you don't see it.

This is the only relevant effort to this question. I tried to edit the question to introduce clarity on my smartphone but all my efforts were wasted when the initial question was reloaded on update.


As to your question. This is part of an application that ( among other things) renders images on Windows.
Users have to fill forms ( typical win32 controls forms). For users who have a large amount of data to submit, I have developed a format for presenting the data in a .txt file and submitting to the software administrator by either Whatsapp, Facebook Messenger or email. The file path will be gotten through this code. There is another program that parses the text file to check for conformity with spelled out format and reports errors on finding such non conformity. If the 'data-feeding-in' file content conforms to specified format. The program will harvest the data in it and populate data base with the data in it.

Getting the filename is the trivial part, parsing, error reporting to users or populating database with harvested data is the more important part. I wanted to debug and test the data-harvesting-program, but could not because I could not get the name of the file ( whose content I created for the purpose of testing and debugging the data harvesting program). It just happens that the code gets images path but would not get .txt file path.

All that the function DrawAppImage does is to render the image on the window via the device context.

I use the wrapper GetFilePath for all my filename getting task, then pass the filename to an appropriate program for further processing.

In the above example, further processing means rendering the image file on the window. In the case of the text file, it would mean parsing the file and populating database with harvested data if the parse is successful. Can you help look into while my specified file filter for text files failed?

What does their site mean by install. I wanted was codes to download.

Is there an already compiled library that I can use?

So, in short, I can't build it with visual studio. I would need both gcc and WSL2.

Is there an already compiled library that I can use?

Okay, I saw the .Net Document class. What it is doing is exactly what I am doing now. I am writing one page per time to the device context. All is going on fine with that except that there is flickering. To eliminate the flickering I decided to write first to a memory dc. That's where the problem starts from.

I believe that successively drawing small portion as needed may be what I need. Could you possibly help a contrived example codes. Examples online are not too relevant. Should you decide to help with the contrived sample code. It might be good if you read my comment to the second solution below. It represents the challenge. I have tried in the past to draw content successively as needed, but no algorithm that I came up with has been able to do it

Okay, say I have a sixty page document with images, lines . ellipses , text all drawn by my app. If I want to view page 60, I will have to scroll down. There is no way the memory dc bitmap can reasonably be as large as the sixty page document if each page is A4 paper size.

Do you mind giving me an example of calculating which data is visible?

I tried your suggestion and their was flicker. How do you handle flicker? My application, like many others have to access database frequently, in fact, it does not access file at all. Sometimes, queries generate errors due to different kind of reasons. Some times there is break down of communication with database because it is in a remote server and there is temporal internet network connection breakdown. In many o f such situations users have to wait for response to the database and respond to errors and exceptions apprpriately. Will handling all such from WM_PAINT be suitable? For, for now, I connect with database from WM_COMMAND generate by menus and connect to database to fill up a buffer with required data. if the buffer was successfully filled, I write data to memory dc and call invalidaterect to generate WM_PAINT message which causes the written data to be copied to the window DC from the memory DC. If you can be generous an kind to guide me into unerstanding how all these can be achieved by doing all writing in WM_PAINT , I will greatly appreciate it. I do wish to be a better programmer. Your input will go a long way to ensure that.

How do you handle flickering?

It uses black pen and white brush.

I am very fluent with MFC, but its better if you share the WIN32 version here.

You said that the size value increases as the font increases. By that i you mean he fontHeight parameter use to create the font? If , yes, what happens if the fontHeight paramter decreases which is the obective in my own peculiar situation.

Sorry, I made a mistake in my post. The memory dc was created during WM_INITDIALOG and not during WM_CREATE as I previously wrote. Do have any other possible solution idea?

I was drawing on the dialogue box window not on a control.

Thanks for your input. The problem was using MAKEINTRESOURCE macro. IDC_WAIT was already deine in terms of MAKEINTrESOURCE as explained below. Using it again amounted to unneccessary repeatition.

The value returned by size regardless of how many times iFontSize was decremented was cx = 5988 and
cy = 479. What do you think?

There were so many uses of the load cursor function in the app, but the error messages were all identical, so i copied the first two. Yes, the problem is the MAKEINTRESOURCE. The issue was resolve afterI removed it. Thanks a lot.

The thing is that when I draw the image directly during WM_PAINT, it gets drawn but flickers. Problem arose when I drew to the memeory dc first. What do you think?

Thanks, I'll check it out.

Iam sorry I just seeing this now. Want I want to ask is this: if the user selected pages 3,5,7,10 and 25. How does one use nFromPage and noPage to print such a selection since it is not a "coninuous range"?

I have added the definition of CreateAppFont. Do you mind looking at it? Can, I see youre version of the code that worked?

How does one know the pages to print? How does one Check if any of the values are true.

Sorry, but your sample pre-compiled header files does not specify where to put C++ runtime libraries. My project needs gdiplusheaders.h, where do you suppose that I put that. Finally, do you by chance know what namespace graphics and image GDI+ classes belong to? My experience is that one or the other needs gdiplus.h while the other needs gdiplusheaders.h.

Can you additionally tell me how to use warning level 4 and the pragma turns off warning 445 that usually results from the GDI+ headers?

How does one create a pre-compiled header with visual studio 2022?

Thanks so much for your input. It eventually turned out that you are right. What was causing the problem was a combobox selection notification handling function that updates the list box content. In the said function, the item data was set incorrectly. Once again, thanks.

I have added that information to the question.

The code works, but it is not returning the assignd value.It is returning a differnt value.The assigned value is 25. It is returning 1. One(1) happn to be the value assignd to the first item listed int th list box. It seem to be returning the order in which each selected itme was selected in the listbox. For the first selected item, it returns 1.

Thanks. This is so embarassing. I am sure I have read through that document several times already. The problem is something so way, way, way too simple for my liking. I had started to think that visual studio is too buggy for my liking.

Thanks for the solutin.

Thanks for the solution.

I have added the content of framework.h above. Do check it out.

So, is there any assistance you can give with these revelation?

The example codes in your link use stdafx.h. I don't know how to make visual studio add stdafx.h in visual studio 2022. If you knw ho it is done kindly tell me.

! have added code. I will really appreciate it if you can help.

By the way, how can I make visual studio add stdafx.h to my program. I selected the link option for using it, but it did not use it. I created an header file with that name and included it, but nothing came out of it.Instead it was asking for pc.h or something like that.

I had replied previouly without reading your solution very closely. I always put #include<gdiplus.h> after windows.h. Same goes for using namespace gdiplus and
#pragma comment(lib,"Gdiplus.lib"). Unless what you really meant was to put is before windows.h. That is, above it, in my program. I had experimented with putting gdiplus.h before windows.h to no effect.By the way, how can I make visual studio add stdafx.h to my program. I selected the link option for using it, but it did not use it. I created an header file with that name and included it, but nothing came out of it.Instead it was asking for pc.h or something like that.

Ok. I will give ita try and feed you back.

Well, I eventually confirmed that you are right. The code that had <stringapiset.h> in it, and from which I eventually commented out MultiByteToWideChar and its sister function from, I decided to make a dll of the code since I still needed the conversion from utf8 to utf16. I beleived that making it a dll would solve the problem because it would be all alone. Well, to the greatest of surprise, the #error notification showed up as a compilation error again. This was so exasperating. I had no other option than to go and and attempt to set the target platform like you stated in your solution. First, I set it to x86. The compiler complained that x86 was not compartible with x64 .By that I guessed that it was referring to x64 that I had chosen on combobox of visual studio that is located on the toolbar. So, I changed the setting of the one on the toolbar to x86 too. I was plesantly surprised to discover that it worked.

So, I went back to my original project and uncommented everything I had commented out to exclude MultyBteToWideChar ant its sister from my project. Then, I went to the compiler settings and set the target platform to x64. I was quite happy to discover that the project compiled without any #error compilation error. Your solution is the correct solution. I noticed that my own solution has been accepted. Plese, moderators, this solution is the correct one.It is the best. Kindly delete mine and let people use this. Mine will cause people a lot of stress. I am accepting this your elegant solution right away. What you said proved to be true. My solution was a side-stepping. The problem occurred again in a situation where there ws no room for side-stepping. It was your solution that saved the day. By the way, I abandoned the dll that I created. It was no longer useful to me because of your solution.What anyone who faces this kind of error needs to do is to first flip the default target platform in the compiler setting and the chose his prefferd one. Once you choose apply, the problem is solved.

Please, moderators, this solution should be top rated and not mine. I am the one who came with the problem and I know the better solution because I have applied both.

I am sorry, I don't think you are right.When I got to the complier setting location, I saw that it was already set to x64. Just as I had chosen in the combobox on the toolbar of visual studio where you can choose either x86 or x64.I went back and changed the option to x86 on visual studio's toolbar combox, then went back to see what the compiler option now is. It had changed to x86. So, whatever you choose at the toolbar combobox is your target machine , and I always have a choice on the tool bar which is either x86 or x64.

OK. I will check it out.Thanks a lot.

I checked out the link, that link is about showing people how to use GDI+ classes. The problem here for now is how to ensure the program is able to use GDI+ classes. How can a program, that did not even compilein the first place, use GDI+ classes. The hudle I am trying to scale at this stage it to get the program to initialize itself succeccessfully for GDI+ operation first. The program is yet to do that. GdiplusStartup will not compile, not to even talk using any class or structure.

Do kindly help me understand what you are trying to tell me. I have not used any GDI+ class or function in my project. Not even a single tiny one. All though I would use them a lot much more later. This is a new project, I just wanted to ensure that it is ready for GDI+ operations. All I have done so far is to call GdiplusStartup in WinMain when the program starts and call GdiplusShutdown when it is about to exit. So, for now, I have not really carried out any GDI+ operation.Thanks for the link.I will check it out.

I think it is caused by header files class. When one or more files include the same header file. Modules only exposed exported component of the file. So, the don't create header file clash.

Are you really sure about that because seem to remember intstlling all there was to install.

That is the extension for module files in visual studio 2022

I am not new to using Gdiplus. I stopped programming for years. I just resumed this month. I think the application does not compile becuase it did not link with neither gdiplus.lib or gdiplus.dll or both.
I don't remember how to do that in visual stidio. My guese is that part of it is what the #pragma comment is supposed to stop.

I think the application does not compile becuase it did not link with neither gdiplus.lib or gdiplus.dll or both.
I don't remember how to do that in visual stidio. My guese is that part of it is what the #pragma comment is supposed to stop.

Please, note that none of these errors have anything to do with my code. The are all from gdipus.

Please, note that none of these errors have anything to do with my code. The are all from gdipus.

Yes, I get compiltion errors:


Severity Code Description Project File Line Suppression State
Error (active) E0020 identifier "REAL" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbrush.h 270
Error (active) E0169 expected a declaration ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplus.h 82
Error (active) E0020 identifier "IStream" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 50
Error (active) E0020 identifier "IStream" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 85
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 124
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 137
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 150
Error (active) E0020 identifier "IStream" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 152
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 163
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 172
Error (active) E0020 identifier "ImageType" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 188
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 198
Error (active) E0020 identifier "SizeF" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 200
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 220
Error (active) E0020 identifier "RectF" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 222
Error (active) E0020 identifier "Unit" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 223
Error (active) E0020 identifier "REAL" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 250
Error (active) E0020 identifier "REAL" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 260
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 280
Error (active) E0020 identifier "PixelFormat" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 286
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 306
Error (active) E0020 identifier "ColorPalette" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 308
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 315
Error (active) E0020 identifier "ColorPalette" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 317
Error (active) E0020 identifier "GetThumbnailImageAbort" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 327
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.226

By it won,t work? I meant it wont compile successfully.

it would give the folowing error messages:


Severity Code Description Project File Line Suppression State
Error (active) E0020 identifier "REAL" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbrush.h 270
Error (active) E0169 expected a declaration ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplus.h 82
Error (active) E0020 identifier "IStream" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 50
Error (active) E0020 identifier "IStream" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 85
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 124
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 137
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 150
Error (active) E0020 identifier "IStream" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 152
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 163
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 172
Error (active) E0020 identifier "ImageType" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 188
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 198
Error (active) E0020 identifier "SizeF" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 200
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 220
Error (active) E0020 identifier "RectF" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 222
Error (active) E0020 identifier "Unit" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 223
Error (active) E0020 identifier "REAL" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 250
Error (active) E0020 identifier "REAL" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 260
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 280
Error (active) E0020 identifier "PixelFormat" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 286
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 306
Error (active) E0020 identifier "ColorPalette" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 308
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 315
Error (active) E0020 identifier "ColorPalette" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 317
Error (active) E0020 identifier "GetThumbnailImageAbort" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Include\10.0.22621.0\um\gdiplusbitmap.h 327
Error (active) E0020 identifier "Status" is undefined ResultSheets C:\Program Files (x86)\Windows Kits\10\Inc

#include<iostream>

int main()
{
vector<int> vList{6,10,8,2,9,1,7,4,3,5};

for(int i = 0; i < vList.size(); i++)
{
std::cout << vList[I] <<' ' ;
}

@OriginalGriff, how does one backtrack with vs 2020?

I did use a debugger. The debugger revealed that at some point in the recursion, iRemaining had no value even though iMiddle and i
helperLeft had values. I am referring to the statement: size_t iRemaining = iMiddle - iHelperLeft;

The condition that I set for throwing an exception is: if (Index <= -1 || Index >= m_iCount).
As revealed from debugging, the exception was thrown when Index = 0. You use zero to replace Index in the conditional statement and see if the result will satisfy the condition for throwing exeption.

The problem is that the program did not even compile. the first error is "Error C2061 syntax error: identifier 'iterator'". There are other errors they are so many and I believe they are all caused by the initial error stated above. If the initial error is corrected all of the remaining error messages will probably not show up again. So, I commented out every thing that had to do with the iterator class, the program then compiled but on running it, it kept throwing exceptions without any logical reason.

Thanks. I appreciate this

Thanks. I appreciate this.

Thanks. I appreciate this .

Thanks I appreciate this.

Thanks. I wish I can get an answer from an expert on hash function writing.

Can you kindly give some details as to how the function internals can be? What do you mean by useful HASH? What I really need is some guide on how to hash interger, how to hash double, how to hash strings, how to hash objects, etc. Using the approach HASH(k) = k% buckets is too trivial. It will not work for strings, neither for doubles, neither for objects etc

I need the hash function for a hash table.

Json::Value is a JsonCpp Value type it will be familiar to people ho use JsonCpp.

std::string MakeString(long long llValue)
{ char Buffer[100];
sprintf(buffer,"%lld",llValue);

return std::string(Buffer);
}

Its the numeric indexing that is the problem not the string.

It says there three possible matches: namely, int, long , long long.

See my solution below.

It is not I but users of a client/server desktop application that will need to periodically come to the application's website t periodically create a certificate for themselves. Do you think OpenSSL command line tool will be suitable for this?

I eventually found one.See below.

Okay, what I meant was link to sample code. Or perhaps, google search key word.

Thanks. I found the problem. See my solution below.

I am working on this same thing. How does one locate the registry entry?

I am working on this same thing. How does one locate the registry entry?

If I understand you well, in my own peculiar case, do you advise I should first go and learn about hacking and security, test my function before asking my question?

What do you suppose I should do so as not to look like a help vampire?
If you are to advise on my not being a help vampire , what would you advice.

I only typed that to fill that space so that the question will submit.

Do kindly give your advice on what I should do so as not to be a help vampire, in this case?

http://www.codeproject.com/script/Answers/MemberPosts.aspx?tab=answers&showall=True

Thats a link to my answers page. Now if you have had the experience I had, what will you do.

If I tell you what I do for a living, you will have a paradigm shift and apologise rather than criticize, me.

So you think because I have been here for 7 years I am very knowledgeable right?

I have had a fair share of ridicule, verbal attack, verbal harassment in this forum. Why would I want to open myself to ridicule when I am not sure of my answer.

If a give ridiculous answer, you might be the first to ridcule me or put -10.

When I am sure of an answer I will give it. When I am not sure of it, I will hold my peace. I am only following the advice of Segay, an expert who has berated me severally in this forum.

Ok. I will edit. The post and put something else.

Please check my last comment.

I am not a vampire. My programming knowledge is just too elementary for this forum. If you go through the list of my questions will see where people berated me severally for asking elementary questions. In fact someone once said my question don't belong here. So if my questions are too elementary( by CP standard ) how do you expect my to solve other people's questions. Sergay Alexandra will have one or too thing to say about me. He has once advised me to keep my answers to myself unless I am sure of my solution. I am not the kind of person who lies and I don't see any reason why I should lie. I just needed to fill the space.

Well, in case you care to know. I am a member of some other programming forum where I am considered a guru and I offer help regularly. The truth is this: until I become a much more experienced and knowledgeable programmer, I will remain largely a asker rather than a giver as far as code project is concerned. Sergay, one of the experts here, advised me to keep my answers to myself. Nonetheless, I once answered my own question in the solution section when I was sere of the answer.( you can check my username to verify.

Pleas see my reply to last comment.

I was only being honest in my opinion. I don't know how to hack. The only way I could possibly do something was to attempt to hack my app to see if it was secure. If I live the field blank, the question will not submit. If I say I don't know what to do. I would be lying. Come on friends, you don't expect me to lie do you. I know what to do, but I do not have the requisite knowledge to do it.

But I am not using http Server API 2.0. I am using 1.0

I tried using 2.0 it did bot work. Maybe this is the reason. I do not really know, but I remember that it did not work. I will rewrite the code again and use version 2.0 and use HttpAddUrlToUrlGroup and see what will happen.

This is quite illuminating.

Thanks a lot. The second zero and the slash before the port number were actually typos. I will give it another try.

Wow. These links given above are way way helpful. Thanks.

Oh! Never thought of that. The program expect fully qualified URI. Do you by chance know what a fully qualified URI is? isn't the same as a url? The only parameter passed to the program is a url, so perhaps there is a particular way it must be written to make it a fully qualfies uriBy the way, I used http:\\127.0.0.0.1\:80\The Script's Folder Name.

Thanks now I have loads of articles, and codes from googling with your suggested key, even one from the founder of Code Project.

It seem you have an idea on how to stop the app remotely. Do you mind sharing it with me?

The administrator will need to interact locally with the server application. So he may need to stop it locally.

Thanks once again for this ur comment.It really did point me in the right direction.Googling the keyword cookie made your your suggestion clearer.I think I am getting close to hitting a 'home run’. Cheers.

I know all that.I mean if I create my own custom cookie as advised, with php associate it will all sessions it creates and all session variable it creates just as if the cooker was sent by a web browser?
Any way.Thanks a lot. The hint, it appears is, developing a policy for system/application recognition by the web service. I can always do without php kind of session and session variables.I just hope that is wise.

Pls I think I need more info. How do I create globally unique cookie?How would I make the sent back cookie work with php start session function and more importantly with session variables? Is there a function for creating cookies?What is the syntax of a cookie

Yes, I am referring to more to your comment in the other ellipse question.

Thanks for your solution. But I.believe you will agree with me that that not all questions require codes. How does one write code on anti-aliasing if he doesn't know what it is in the first place.Often times,all one needs is someone to point him in the right direction. Anyone who has used msdn for some time will know that documentation doesn't always have all the information. It it does there will be no need for googling, in fact there will be no need to join this forum. Besides, I think you need to be more patient with people on here. You can correct without sounding hash and critical. All you need do is soften the tone of your responses.

I remember one of my encounters with you.I had just joined code project and that was the first time I will join a forum. I used to use yahoo answers until some from yahoo answers gave me a link in CP that was how I discovered CP. Since I did not know how to use the forum I erroneously posted a reply to an answer as solution, and what did I get, a lambasting from you. Ironiously , it was another old member who guessed that I did not know the correct thing to do that instructed me on the right thing to do.Rather than lambast me that, in my opinion is what you should have done.I think you really should endeavour to be more patient and tolerant. In spite of it all , you remain the most helpful and resourcefull member of CP to me. Stay blessed.

By rough boundary I mean boundaries that have a degree of zig-zagging. By smooth edges (or boudaries) , I mean edges/boundaries that have no iota of zig-zaging.

I don't want to distort the image.I want to cut out all parts outside the ellipse.

I take that as a joke. if my question is not clear to please let me know so that I can r-word it.

Can you show me a snippet of the code with which you did it?

Not done deliberately. Will delete one now.

Thanks. I have fixed it.

Thanks. I fixed it. Everything is fine now.

Please how is that so? I still can see it.

That was a typo.

ok. Will try it thanks.

Ok. I'll rewrite it and without any goto statement.

The only thing I gathered from that link is that certificates are used by web servers and web browsers only.

I still couldn't find an answer to my question there. Is it only web servers and clients that can use them? Does it mean my own written server and client cannot?

OK. I remember now. I added severe got statement of my own to for agreement with the former version.

So, can you suggest a better way to write the code without goto and still do clean up.

But, I think the code is still very readable even with that large number of goto. Or don't you think so?

Funny. I got somewhere on the web and modified it. I am not the cuprit.

I am sorry for ds belated comment. just seing it now. how come u seem to know so much anout mfc? Don't u have concerns about d long time it takes to complete project using win32 API?

Thanks a lot. I appreciate this.

Ok. Thanks. I'll try it.

Thanks. I appreciate this.

I have seen that via google search. It is an article on Static Splitter and not dynamic splitter? By the way, what are you using now? Asked because I am thinking of dumping MFC for Qt.

I know I have to create the views, but that function is used to create views for static splitters. This is a dynamic splitter. Is there an equivalent function for dynamic splitters? It appears the frame work creates the views of the same view type in dynamic splitting. How do I intercept the view creation in dynamic splitters so as to decide which view type each pane is?

I used this code on VS2010 but id did not seem to work.

I added an MFC button from the resource editor and wrote.

CMFCButton *pButton = (CMFCButton *)GetDlgItem(IDC_MFCBUTTON1);
pButton->StFaceColor(RGB(255,0,0),true);
pButton->SetTextColor(RGB(0,0,255));

I wonder why the code doesn't seem to work.

Clearly my question is not clear. Its title which was meant to give people the idea that its a painting problem is not really apt.I will edit it.


Well. I actually wrote the repaintg code on receipt of WM_PAINT message. This means that every time my prigram receives the said message the rendering is done.At least that is what i expect of code that responds to the WM_PAINT message. The strange thing is that the black bacground is shown subsequent to each WM_PAINT repainting.

I suspect that what is happening is that MFC displays a default view with.black bacground when all the child windows have been closed.

Perhaps you should have a look at my solution below.

Perhaps you should have a look at my solution below.

Perhaps you should have a look at my solution below.

Funny enough, I did not notice this your last comment before now.Thanks for it.

I was able solve the mystery myself. I found many of the common menu function wont work. MS has made every item on the toolbar objects. The number of objects associated with a popup menu alone is shocking.

None of the proferred solution has worked. Very strange.

No. The original question is not solved. I am still searching for a solution. Its all in a bid to find a solution.

I have corrected the typo.

Ok. Closer look revealled that it was just a codeproject typo. Thanks for the observation.

Oh no! It appears I had carried out wrong diagnosis.

That aside,kindly check my updated question. Thank you.

Kindly check my updated question. Thank you.

I don't quite understand this. I was of the opinion that I am already checking pMainMenu or am I really not? Kindly expansiate.

Dubbuging has shown that is is GetMenu() that failed please see the new revalation as see if you can help provide a solution to the modified question. Thank you.

Dubbuging has shown that is is GetMenu() that failed please see the new revalation as see if you can help provide a solution to the modified question. Thank you.

The example code shown there is more or less identical to my code above. The menu location zero was used to get a pointer to the FILE menu.This is exactly why I find the fact that my code is not working mysterious.Or can you see any special differnce between my code and that on MSDN apart from use of AfxGetMainWnd() ?