Click here to Skip to main content
Click here to Skip to main content

Beginning Winsock Programming - Multithreaded TCP server with client

, 5 Mar 2002
Rate this:
Please Sign up or sign in to vote.
Explains a multithreaded TCP file server, a custom TCP chat protocol and a custom TCP client


In previous articles in this series we went through writing a simple TCP server that could accept a single connection at a time and also a simple TCP client that could download a file via HTTP. But it must have been obvious to most of you that a server program must surely be able to handle more than one client connection at any time. Otherwise if a client is currently  connected, other clients wouldn't find the server to be of much utility to them.

In this article we shall write a multithreaded TCP server. In addition we shall also create our own custom TCP chat protocol, albeit a very simple one. We will also then write a client that will connect to this server and chat using this protocol. You might try running multiple versions of the client at the same time to test whether the server can indeed accept multiple connections. The server simply sends requested files to the client which then saves it on the client machine.

The method used here for handling multiple clients is the age-old method of one thread per client connection. There are several other more efficient mechanisms for handling multiple connections like IO completion ports. But if the chat protocol is elementary and each client connection is not very processor-intensive then this is a pretty reasonable method unless the number of clients that would connect at any one time is abnormally large.

Writing the multithreaded server

Those of you who have read my article on writing a simple TCP server would probably know how a TCP server is created. Others might be better off to go and read that article first. Others can continue. There is not much difference in our main() function. We start the server thread and loop endlessy on _getch() till someone presses ESC and then we close the server socket and exit.

int _tmain(int argc, TCHAR* argv[], TCHAR* envp[])
    int nRetCode = 0;	

    cout << "Press ESCAPE to terminate program\r\n";


    return nRetCode;

Now lets take a look at the server thread. Up to the part where we call listen() the code is essentially the same. It's in the accept() part where we make our small change. 

UINT  MTServerThread(LPVOID pParam)

    Code has been snipped off. 
    Refer zipped source for actual code


        return 0;

    SOCKET client;
    sockaddr_in from;
    int fromlen=sizeof(from);

            (struct sockaddr*)&from,&fromlen);

    return 0;

What happens is essentially simple. We accept a connection and the moment we accept it, we start off a new thread passing to the thread the client SOCKET. Then we return back to accept(). Thus the moment a client connects, a new thread is started to handle the client and thus the next client can also connect which will start off yet another thread and so on and so forth. Oh boy! And to think, some of you guys actually expected it to be a lot harder than that eh?

Our own custom protocol

Let's define the commands allowed in our own TCP chat protocol. We'll obviously need a command for closing the session. How about "QUIT"? That seems to be a nice obvious word for that. Now we don't want just about everyone to download files. So let's add an "AUTH" command that has a parameter which specifies the password. If the password is correct then we put the user into the authorized state. Both AUTH and QUIT may be used in the non-authorized state. But the command "FILE" which is used to retrieve files, is allowed only in the authorized state. Well, that's three commands, two of them allowed at all times and one of them allowed only during authorized state. 

  • QUIT  :- This will close the connection
  • AUTH [password]  :- This will log the user into authorized mode
  • FILE [filename with full path] :- Retrieves a file [works only in authorized mode]

Fancy that! Our own nice little protocol. Lets use # to denote success messages and ! to denote error messages. I'll now show you how a simple TCP chat session to our server will look like before I actually show you how it is implemented in code.

Connected to
Escape character is '^]'.
#Server Ready.
file c:\config.sys
!You are not logged in.
auth yellow
!Bad password.
auth passwd
#You are logged in.
file c:\config.sys
#File c:\config.sys sent successfully.
file c:\setup.log
[InstallShield Silent]
File=Log File


Name=Intel Ultra ATA Storage Driver
#File c:\setup.log sent successfully.
file d:\g5.doc
!File d:\g5.doc could not be opened.
Connection closed by foreign host.

As you can see, once a user is logged in, he can request any number of files. I've shown only text files here, but he might as well demand binary files too. In the client program we will write later, we can do this too. Right now let's look at how the client thread handles this chat protocol.

UINT  ClientThread(LPVOID pParam)
    char buff[512];
    CString cmd;
    CString params;
    int n;
    int x;
    BOOL auth=false;
    SOCKET client=(SOCKET)pParam;
    strcpy(buff,"#Server Ready.\r\n");
        if(n==SOCKET_ERROR )			
                    strcpy(buff,"#You are logged in.\r\n");
                    strcpy(buff,"!Bad password.\r\n");
                            "#File %s sent successfully.\r\n",
                            "!File %s could not be opened.\r\n",
                    x = send(client, buff, 
                    strcpy(buff,"!You are not logged in.\r\n");

            strcpy(buff,"!Invalid command.\r\n");

    return 0;

Hopefully, the code is self-explanatory. I'll just run through it briefly. We first send a server greeting as is customary among TCP servers. Now we keep looping and accepting commands. We use our function ParseCmd to parse the command string entered into two CString objects, one containing the command and the other containing the arguments if any. If ParseCmd returns true  it means an unknown command was sent, and we give back an error message. 

If the command is QUIT we break out of the while loop, close the client socket and exit the thread. We also have a boolean flag called auth and we make this true only after the client has authorized itself. Till then, if we get a FILE command we send back a message saying that the client is not logged in. Right now I have hard coded "passwd" as our password, but in a real situation, the username/password will be taken from some database or configuration file. 

Using the AUTH command the user can log in. We compare with our password and if they match we send a message telling them they are logged in and set the auth flag to true, else we give them a bad login error message. Once they are authorized they can request files. We use a function called SendFile to send the files across the TCP connection. I hope things are clear now.

Now lets look at the ParseCmd function

BOOL ParseCmd(char *str, CString& cmd, CString& params)
    int n;
    CString tmp=str;	
    if((n=tmp.Find(' '))==-1)
            return false;
        return true;
    if((cmd!="AUTH") && (cmd!="FILE"))
        return false;
    return true;

Well as you can see, the function is pretty much straightforward. It splits the string and returns true if it encounters a valid command. Otherwise it returns false which indicates error.

Now let's take a look at the SendFile function.

BOOL SendFile(SOCKET s, CString fname)
    CFile f;
    BOOL p=f.Open(fname,CFile::modeRead);	
    char buff[1024];
    int y;
    int x;
        return false;

    return true;

This is also a simple function. It returns true if the file was successfully sent and false if the file was not found. Bit confusing isn't it. I used true to represent an error in ParseCmd and here I am using false to represent an error. I guess I have a long way to go as far as coding standards are concerned. I hope you nice ladies and gentlemen will pardon this grave failing in my personality.

Alright now we have written our multithreaded TCP server with our own custom chat protocol. That's all very well I guess. But I bet some of you are now thinking that perhaps it would be nice to actually write a nice little client program that connects to the server, and chats with it using our protocol, and retrieves a few files as well. Hmmm. By an amazing coincidence I have had the very same idea too. Therefore we shall proceed to write a client program.

The custom client

I won't go through the source code this time. Those of you who have gone through my simple TCP client would have absolutely no problem in downloading and understanding the source code. Just a few points though. Do not use the string manipulation functions like strcpy() and strchr() on the buffers returned by recv(). These byte buffers may not be null terminated and calling functions like strcpy() will simply wreck your program. You may open the source and look into two functions I have used to search the buffer for a certain set of characters. I have not used the string manipulation functions at all.

Here is how to use the custom client. By the way I have hard coded into the client source code as the server IP. You might want to change that if you are running the server and client on two different machines. Before running please make sure that the server is up and running.

Usage :- mtsclient [file1] [file2] [file3] ....

E:\work\MTSClient\Debug>mtsclient c:\cu.gif c:\cp.gif c:\g.gif c:\ddd
File c:\cu.gif not found on server
cp.gif has been saved.
g.gif has been saved.
File c:\ddd not found on server



This is probably the last in my 3 part series of introductory articles on TCP programming using Winsock. By now you must be able to write basic TCP clients and TCP servers [multithreaded]. I suggest that you try writing a simple program that connects to a POP server, logs in and checks whether there is any mail in there. Or you might try writing a small program that uses SMTP chat to send a mail. To test your server coding skills, you might want to write a simple HTTP server. Or think up something and write your own custom server with your own custom protocol. Anyway, have fun...


This article has no explicit license attached to it but may contain usage terms in the article text or the download files themselves. If in doubt please contact the author via the discussion board below.

A list of licenses authors might use can be found here


About the Author

Nish Nishant

United States United States
Nish is a real nice guy who has been writing code since 1990 when he first got his hands on an 8088 with 640 KB RAM. Originally from sunny Trivandrum in India, he has been living in various places over the past few years and often thinks it’s time he settled down somewhere.
Nish has been a Microsoft Visual C++ MVP since October, 2002 - awfully nice of Microsoft, he thinks. He maintains an MVP tips and tricks web site - where you can find a consolidated list of his articles, writings and ideas on VC++, MFC, .NET and C++/CLI. Oh, and you might want to check out his blog on C++/CLI, MFC, .NET and a lot of other stuff -
Nish loves reading Science Fiction, P G Wodehouse and Agatha Christie, and also fancies himself to be a decent writer of sorts. He has authored a romantic comedy Summer Love and Some more Cricket as well as a programming book – Extending MFC applications with the .NET Framework.
Nish's latest book C++/CLI in Action published by Manning Publications is now available for purchase. You can read more about the book on his blog.
Despite his wife's attempts to get him into cooking, his best effort so far has been a badly done omelette. Some day, he hopes to be a good cook, and to cook a tasty dinner for his wife.

Comments and Discussions

GeneralMy vote of 5 Pinmemberhoseinhero19-Dec-12 4:35 
GeneralMy vote of 5 Pinmemberson.phuoc19-Apr-12 23:06 
Questionsend data from one client to another client throgh server Pinmembervahidhwp1-Oct-09 6:55 
GeneralA Universal C++ TCP Socket Class for Non-blocking Server/Clients PinmemberElmue22-Mar-09 10:03 
QuestionHow to listen / control multiple ports/sockets Pinmembertexnguy14-Feb-08 10:07 
Generalsend message to specific client Pinmemberpsyclope6-Sep-07 0:59 
QuestionHow to close tcp connection? Pinmemberdonj826-Jun-07 4:22 
Questionany suggestion for sending unsigned char * messages? Pinmemberarbel kfir11-Jan-07 0:00 
AnswerRe: any suggestion for sending unsigned char * messages? Pinmemberarbel kfir15-Jan-07 22:00 
solve it by casting my (unsigned char *) to (const char *) before sending in the send method
like this ==> send(pObject->socket,(const char * )ptr, len, 0);
the message was sent unsigned
Kfir Arbel

QuestionIs Winsock thread safe ?? Pinmemberj_cheng31-Mar-06 18:37 
AnswerRe: Is Winsock thread safe ?? PinmemberDiego.Martinez3-May-06 3:21 
Generalchat server Pinmemberaftab ali shah18-Jul-05 8:23 
Generalmultithreded server Pinmembercool_vc++4-Mar-05 6:34 
Generalmore than one message or less than one message PinmemberMoshe Gershberg23-Dec-04 11:12 
GeneralRe: more than one message or less than one message PinmemberMike O'Neill6-Feb-05 9:50 
Questionhow to assign a specific ip address to server and client Pinmembersyaks26-Oct-04 0:44 
GeneralHelp Pinmemberasv28-Aug-04 6:02 
GeneralCSocket Issues Pinmemberdharani21-Jun-04 18:26 
GeneralI cant connect to this server PinsussAnonymous4-Jun-04 14:34 
Generalabout timeout PinsussLIMO5-Mar-04 1:53 
Generaltelnet PinmemberGadmovorg12-Jan-04 0:04 
GeneralRe: telnet PinmemberChristos Ioannou9-Aug-04 5:43 
GeneralAuthorisation PinmemberAncient Scientist9-Jan-04 13:51 
Questionmemory leak in server? Pinmemberbryce28-Aug-03 19:10 
GeneralProxy server-help ! Pinmemberdharani8-Aug-03 0:44 
General1460 byte size limitation on messages from client to server PinmemberJames_Thrasher2-Jul-03 8:10 
GeneralVery Good Article Pinmemberkknudsen2-Jul-03 6:29 
GeneralBuffer Problems!!! PinmemberRootLord29-Jun-03 12:08 
GeneralRe: Buffer Problems!!! PinsussVizyon|ST29-Jul-03 23:28 
GeneralRe: Buffer Problems!!! PinmemberArneD21-Aug-03 10:08 
GeneralRe: Buffer Problems!!! PinmemberKXRM7-Jul-04 16:15 
GeneralRe: Buffer Problems!!! PinmemberMoshe Gershberg23-Dec-04 11:15 
Generalcannot start the server Pinmemberbrendo18-Apr-03 6:52 
GeneralRe: cannot start the server PineditorNishant S19-Apr-03 21:08 
GeneralPass Variable to thread Func PinmemberBard2-Dec-02 4:48 
QuestionHow to create mulithread TCP client? PinsussKong Weng Yew17-Sep-02 16:48 
QuestionHow to verify there is no more data in socket PinsussLinh Huynh19-Aug-02 15:11 
AnswerRe: How to verify there is no more data in socket PinsussAnonymous15-Apr-05 1:37 
GeneralI'm reading your first article now... PinmemberHockey18-Aug-02 12:20 
GeneralInteresting PinmemberHockey18-Aug-02 12:18 
Questionsebding class by socket? Pinmembera_hic20-May-02 7:45 
AnswerRe: sebding class by socket? PinmemberBubba214627-Jun-02 8:32 
GeneralRe: sebding class by socket? Pinmemberakcom2-May-03 11:38 
GeneralRe: sebding class by socket? PinmemberBubba21465-Jun-03 3:58 
GeneralCan't get your client to work! PinmemberRickard Andersson5-Apr-02 7:59 
GeneralRe: Can't get your client to work! PinmemberNish [BusterBoy]5-Apr-02 8:12 
GeneralAttention - newbies PinmemberNish [BusterBoy]7-Mar-02 18:45 
GeneralRe: Attention - newbies PinmemberMatt Newman8-Mar-02 4:03 
GeneralRe: Attention - newbies PinmemberTim Smith8-Mar-02 5:02 
GeneralRe: Attention - newbies PinmemberNish [BusterBoy]8-Mar-02 7:03 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web04 | 2.8.150327.1 | Last Updated 6 Mar 2002
Article Copyright 2002 by Nish Nishant
Everything else Copyright © CodeProject, 1999-2015
Layout: fixed | fluid