Click here to Skip to main content
Click here to Skip to main content

DirectX.Capture Class Library

, 29 Mar 2008 Public Domain
Rate this:
Please Sign up or sign in to vote.
A .NET class library for capturing video and audio to AVI files.
Sample Image - DirectXCapture.jpg


This article presents a class library for capturing audio and video to AVI files in .NET. Some of the features of this library:

  • List and select hardware devices
  • Access to common audio and video settings (e.g. frame rate, size)
  • Support audio and video compression codecs
  • Support video preview
  • Support TV tuners
  • Support crossbars and audio mixers
  • Retrieve device capabilities
  • Show property pages exposed by drivers
  • MSDN-style documentation included

Using the Code

The Capture class is the core of this library. Here is a simple example:

// Remember to add a reference to DirectX.Capture.dll
using DirectX.Capture

// Capture using the first video
// and audio devices available
Capture capture = new Capture( Filters.VideoInputDevices[0],
                               Filters.AudioInputDevices[0] );

// Start capturing

// Stop capturing

Remember to add a reference in your project to DirectX.Capture.dll. This DLL requires DShowNET.dll, so make sure they are both in the same directory. Once you add the reference, Visual Studio .NET should take care of the copying for you.

This example will capture video and audio using the first video and audio devices installed on the system. To capture video only, pass a null as the second parameter to the constructor.

The class is initialized to a valid temporary file in the Windows temp folder. To capture to a different file, set the Capture.Filename property before you begin capturing.

A Second Example

This next example shows how to change video and audio settings. Properties such as Capture.FrameRate and Capture.AudioSampleSize allow you to programmatically adjust the capture. Use Capture.VideoCaps and Capture.AudioCaps to determine valid values for these properties.

Capture capture = new Capture( Filters.VideoInputDevices[0],
                               Filters.AudioInputDevices[1] );

capture.VideoCompressor = Filters.VideoCompressors[0];
capture.AudioCompressor = Filters.AudioCompressors[0];

capture.FrameRate = 29.997;                 // NTSC
capture.FrameSize = new Size( 640, 480 );   // 640x480
capture.AudioSamplingRate = 44100;          // 44.1 kHz
capture.AudioSampleSize = 16;               // 16-bit
capture.AudioChannels = 1;                  // Mono

capture.Filename = "C:\MyVideo.avi";


The example above also shows the use of video and audio compressors. In most cases, you will want to use compressors. Uncompressed video can easily consume over 1GB of disk space per minute. Whenever possible, set the Capture.VideoCompressor and Capture.AudioCompressor properties as early as possible. Changing them requires the internal filter graph to be rebuilt which often causes most of the other properties to be reset to default values.

Behind the Scenes

This project uses 100% DirectShow to capture video. Once a capture is started, DirectShow spawns another thread and handles retrieving/moving all the video and audio data itself. That means you should be able to capture at the same speed and quality as an application written in C.

DirectShow is implemented as a set of COM components and we use .NET Interop to access them. The pioneering work on this was done by NETMaster with the DShowNET project. This Capture library uses DShowNET for the interop layer with only a few extensions. This is the DShowNET.dll mentioned earlier.

Sitting on top of all of this is the Capture class library. The center of any DirectShow app is the filter graph and the filter graph manager. For a good overview, see The Filter Graph and Its Components from the MSDN.

The Least Work Possible

The library tries at all times to do the least amount of work possible. The problem is: DirectShow is very flexible, but has few firm standards for driver developers and I have limited hardware to test with. As a result, the class tries to avoid doing any work that may not be necessary, hopefully avoiding potential incompatibilities in the process.

One example is video preview. You can start and stop preview with:

// Start preview
capture.PreviewWindow = myPanelControl;

// Stop preview
capture.PreviewWindow = null;

Hopefully this is simple to use. Internally, DirectShow does a lot of work: add required upstream filters for WDM devices, search for preview pins, use the Overlay Manager for video ports (hardware overlays), insert SmartTee filters when a separate preview pin is not available and more. Instead of rendering the preview stream as soon as the class is created, the class waits until the PreviewWindow property is set.

For developers who don't need preview, none of this work will ever be done. That means your application is more likely to work on a wider range of hardware. For developers that do need preview, this makes it easier to locate the cause of the problem and fix it or handle it gracefully.

Performance Tips

Many of the properties on the Capture class are retrieved directly from the underlying DirectShow COM components. If you need to refer to the property repeatedly in a block of code, take a copy of the value and use your copy.

// AudioSampleSize is retrieved from DirectShow each iteration
for ( int c = 0; c < 32; c++ )
    if ( c == capture.AudioSampleSize )
        MessageBox.Show( "Found!" );

// A faster solution
int x = capture.AudioSampleSize;
for ( int c = 0; c < 32; c++ )
    if ( c == x )
        MessageBox.Show( "Found!" );

Why doesn't the class simply cache the value internally? We don't know when the filter (device driver) will change this value, so we have to retrieve the value every time. This means you will always get the real value of the property.


The DirectShow interop layer was developed by NETMaster in the DShowNET project. The MDSN-style documentation was generated from the source code using nDoc.


I have tested this with an Asus v7700 (NVidia GeForce2, reference drivers) and my onboard sound card. I can't guarantee any other hardware will work. However, I expect most video capture cards and sound cards will work. You may have trouble with TV Tuner cards and DV devices (Firewire camcorders) though they should be solvable.

Try the AMCap sample from the DirectX SDK (DX9\Samples\C++\DirectShow\Bin\AMCap.exe) or Virtual VCR, a free DirectShow capture application.

This class library uses COM Interop to access the full capabilities of DirectShow, so if there is another application that can successfully use a hardware device then it should be possible to modify this class library to use the device. Please post your experiences, good or bad, in the forum below.

User Enhancements

The following enhancements have been posted to the discussion board:

Thanks to fdaupias and dauboro for their submissions. I have not had time to post a tested, updated version with these enhancements. If anyone wants to make an updated download zip, mail it to me and I will added it to this page. Keep the enhancements coming.

DirectX.Capture Wiki

A Wiki for this project is available here. This Wiki can be edited by anyone, no registration is required. I hope this Wiki will allow interested users to more easily collaborate on this project. New versions, enhancements, tips and tricks can be posted on the Wiki.


This article, along with any associated source code and files, is licensed under A Public Domain dedication


About the Author

Brian Low
Web Developer
Canada Canada
No Biography provided

Comments and Discussions

QuestionThe demo project doesnot work wit startech video capture card PinmemberGourav Sharma from Jammu27-Mar-15 23:22 
GeneralMy vote of 5 PinmemberMetafunken2-Mar-15 3:19 
SuggestionThere is an update available for your article PinmemberElmue11-Oct-14 7:13 
Questionhow can i change bitrate of output video file! Pinmemberson0nline22-Sep-14 17:33 
QuestionPreview size PinmemberMember 856901526-Aug-14 11:41 
AnswerRe: Preview size PinmemberMember 110593634-Sep-14 8:36 
Questionhow to only display video and not save any file? PinmemberMember 1101579815-Aug-14 18:50 
AnswerRe: how to only display video and not save any file? PinmemberMember 110593634-Sep-14 8:49 
QuestionHow do I rotate a camera view got with DirectX in Vb.Net ? PinmemberOlayèmi Ouabi13-May-14 0:08 
QuestionDIsplay YUV Pinmembertieugiang9415-Apr-14 1:31 
Questioncapture desktop as image PinmemberMember 107369579-Apr-14 17:47 
Questionhow i save image to folder in c# PinmemberSoahib jamil2-Apr-14 20:10 
QuestionIt's not work right Pinmembertieugiang9414-Mar-14 22:02 
QuestionGetting error PinmemberMember 87728507-Feb-14 8:50 
QuestionUSB Composite Adapter + Crossbar Pinmembercw229030-Nov-13 8:20 
AnswerRe: USB Composite Adapter + Crossbar Pinmemberfree5lot29-Dec-13 23:08 
QuestionNotSupportedException - No devices of the category PinmemberMember 1022732411-Sep-13 2:25 
QuestionHow is possible work this project connect with captura card channel 4 or more PinmemberJose Alejandro Realza Rojas25-Jul-13 13:14 
Questioninvalid oleaut date PinmemberMember 861978928-May-13 10:52 
Questionproblem using library PinmemberTeo Ryan Hermawan14-Apr-13 2:30 
GeneralMy vote of 5 PinmemberMichael Röttges21-Mar-13 7:36 
Questionframerate higher than 30? Pinmemberalejocuba5-Mar-13 23:11 
AnswerRe: framerate higher than 30? PinmemberMichael Röttges19-Mar-13 2:46 
Questionneed help for video driver initialization Pinmembersujoybasak1-Feb-13 6:09 
QuestionPreview HD Video PinmemberMember 959628430-Jan-13 0:34 
GeneralI see Homer PinmemberMaoChen19-Jan-13 19:07 
Questiononly record 64 kbit Pinmemberse10008-Jan-13 23:24 
QuestionRecording 8bpp (black & white) from camera PinmemberGilelgrably8-Jan-13 23:04 
Questionx64 solution PinmemberKangerm00se18-Oct-12 6:47 
AnswerRe: x64 solution PinmemberMichael Röttges21-Mar-13 22:45 
QuestionСпасибо Pinmemberfarexg14-Oct-12 17:48 
Большое спасибо за труды.
QuestionSmall avi buffer to send over the network PinmemberMihaescu Florin3-Oct-12 23:22 
GeneralMy vote of 5 Pinmemberkhosrow parizi19-Sep-12 7:43 
QuestionDraw rectangle Pinmembermanganat18-Jun-12 0:02 
QuestionRun time error PinmemberTiwari A K15-May-12 22:17 
QuestionI have issue during capturing the video PinmemberMember 85000363-May-12 4:49 
Questionproblem directx.capture Pinmemberitaliainminiatura28-Mar-12 4:48 
GeneralMy vote of 5 Pinmembermanoj kumar choubey12-Feb-12 21:39 
QuestionSystem.Runtime.InteropServices.COMException Pinmember6739652221-Dec-11 16:39 
QuestionFM tuner Pinmemberdino.giuditta6-Oct-11 4:17 
GeneralMy vote of 5 PinmemberThiago Tozim7-Jul-11 4:30 
QuestionDirectX.Capture.dll & DShowNET.dll dlls. Pinmemberno_-_namee6-Jul-11 4:08 
AnswerRe: DirectX.Capture.dll & DShowNET.dll dlls. Pinmemberbutterfly081525-Jul-11 20:53 
GeneralRe: DirectX.Capture.dll & DShowNET.dll dlls. PinmemberSamuel Garratt2-Oct-11 16:17 
GeneralStream Video Content Pinmemberpsergiu30-Apr-11 7:08 
Generalpara extraer una imagen del video Pinmemberpakotzintote28-Apr-11 6:58 
GeneralRe: para extraer una imagen del video PinmemberBrunoMAlves9-Nov-12 2:16 
GeneralMy vote of 5 Pinmemberpakotzintote28-Apr-11 6:56 
GeneralCapturing from 2 Webcams Pinmembergeko10021-Apr-11 4:39 
Questionno devices of the category error on my win7 but other's computers are working. Pinmemberzll9999-Mar-11 15:31 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Terms of Use | Mobile
Web04 | 2.8.150327.1 | Last Updated 29 Mar 2008
Article Copyright 2003 by Brian Low
Everything else Copyright © CodeProject, 1999-2015
Layout: fixed | fluid