|
What does 'correctly' mean ? What changed on your PC ? Have you tried other videos, such as standard MPG files ? What does the code look like ? What on earth is 'ma', your mother ?
Christian Graus - Microsoft MVP - C++
"I am working on a project that will convert a FORTRAN code to corresponding C++ code.I am not aware of FORTRAN syntax" ( spotted in the C++/CLI forum )
|
|
|
|
|
Hi,
If you paint on a form using a color with alpha level of less then 255 the form background is partially visible. I was trying to achieve the same effect with controls.
I have a control derived from the control class. I have used this code:
SetStyle(ControlStyles.SupportsTransparentBackColor)
BackColor = Color.Transparent
and the foreground is painted with say: color.fromarg(50,255,0,0)
This works nicely with graphics that I have painted on the form background it is visible through the control. But other controls with a lower Z order should logically be visible through the control as well but they are not.
Any thoughts on how to get it to work?
thanks,
Gary
|
|
|
|
|
errorfunktion wrote: But other controls with a lower Z order should logically be visible through the control as well but they are not.
That's a good assumption IF transparent was actually "transparent". It's not. When you set the background of a control to Transparent, you're telling it to take on the background settings of it's parent container. It does NOT make the control transparent so you can see other controls behind it!!
|
|
|
|
|
Hi Dave, thanks for the fast response.
I still don't understand.
If the form has a gray background, on top of it is drawn a green circle.
On top of this is my control. If my control background is gray does that mean that the form in some way paints the green circle on my control?
If what you say is true that would be the only explanation, otherwise
I would not see the circle.
If this is the case can I employ this mechanism somehow to cause other
controls to behave in this manner?
|
|
|
|
|
from what I know of the subject is that when you use a paint (or graphics) to draw a circle onto the background of a form that circle 'becomes a part of the background' (don't really know how else to put it) but when you put a control on the form that control is not a part of the background therefor you can see the circle but not the control
other than taking a printscreen and putting that printscreen cropped on the background of you upper control I wouldn't know how to do it (and I probably would give up the print screen methode since it will be very buggy and maybe even impossible (but I'v never try'd anything like this))
If my help was helpfull let me know, if not let me know why.
The only way we learn is by making mistaks.
|
|
|
|
|
This is simply not true. There is one computer screen and hence only
one set of pixels. If the form background is gray and one draws a green circle those pixels become green. The Form Background is still gray. If a control on top of the form obscures the circle and then moved the form paint event repaints the circle. The circle is by no means part of the background.
Also Dave, It's not true that color.transparent simply gives the control the
container background. If I manually give the control the same background as the
form the circle is not visible. Meaning that color.transparent clearly does
something more.
What it does I don't know.
|
|
|
|
|
errorfunktion wrote: It's not true that color.transparent simply gives the control the
container background.
Wanna bet??
errorfunktion wrote: If I manually give the control the same background as the
form the circle is not visible.
No kidding. That's exactly what is expected.
If you have a background image on the form, the control with the Transparent background WILL show the background image of the form that contains it. Any controls between the background of the form and the Transparent control will NOT show through. The background of the control will take a snippet of the form's background image and make that snippet the background image of the control.
|
|
|
|
|
Why the sarcasm Dave? After all you agree with me. 
Color.Transparent also tells the control to get its background image from
it's container, and hence it does more than simply set it's own background to the same color. Semantics. Never mind.
Meanwhile I've made some progress. I've created a derived button class called MyButton. I also have a regular old button, I've written this code in it's event handler:
Dim img as New Bitmap(TransparentControl.Width,TransparentControl.Height)
Dim GraphicsObject as Graphics=Graphics.FromImage(img)
'I now use a translation transform to account for the diffrence in position
'of the transparent control and the MyButton object:
GraphicsObject.TranslateTransform( _
MyButton1.Location.X-TransparentControl.Location.X, _
MyButton1.Location.Y-TransparentControl.Location.Y)
'I now call the derived Button's OnPaint Event using the Graphics object I
Just created.
MyButton1.OnPaint(New PaintEventArgs( _
GraphicsObject,TransparentControl.DisplayRectangle))
'And Finally I set the Transparent control background image to this image.
TransparentControl.BackgroundImage=img
The derived buttons shape (It's white body) is properly located and visible
on the back of my control. But the buttons text caption is not translated for some reason.
Is the the caption not drawn in the OnPaint Event or something?
|
|
|
|
|
errorfunktion wrote: Why the sarcasm Dave? After all you agree with me.
That's not how it sounded to me...
errorfunktion wrote: I've created a derived button class called MyButton. I also have a regular old button, I've written this code in it's event handler:
Which event??
errorfunktion wrote: Dim img as New Bitmap(TransparentControl.Width,TransparentControl.Height)
Dim GraphicsObject as Graphics=Graphics.FromImage(img)
'I now use a translation transform to account for the diffrence in position
'of the transparent control and the MyButton object:
GraphicsObject.TranslateTransform( _
MyButton1.Location.X-TransparentControl.Location.X, _
MyButton1.Location.Y-TransparentControl.Location.Y)
'I now call the derived Button's OnPaint Event using the Graphics object I
Just created.
MyButton1.OnPaint(New PaintEventArgs( _
GraphicsObject,TransparentControl.DisplayRectangle))
You're going to have to explain this a bit better. Where is this code?? Does your button class derive from Button, or from UserControl??
errorfunktion wrote: 'And Finally I set the Transparent control background image to this image.
TransparentControl.BackgroundImage=img
What TransparentControl? Where did this come from??
|
|
|
|
|
Well I got it working. Here's a couple of screenshots:
http://rapidshare.com/files/53533392/tccontrol1.bmp.html
http://rapidshare.com/files/53531028/tcontrol2.bmp.html
In the forms paint event I have drawn a circle in the upper left corner.
I have also placed a button in the upper left corner.
The arrow shaped thingy is my control.
All You need is a derived control in my case:
Public Class TransparentControl
Inherits Control
'Set These Options:
Public Sub New()
SetStyle(ControlStyles.SupportsTransparentBackColor, True)
BackColor = Color.Transparent 'It might be necessary to override the base 'backcolor property
'Add some code to the paint event to draw the control and use a color with alpha level less then 255.
'As you can see in the first screen capture the form background is visible, but the control is obscured.
' To make the button also visible through the control you can use the button's draw to bitmap method and set that bitmap as
' the controls background image.
' Right now this code is in the button's paint event handler and it makes things a bit twitchy.
There's probably a better position for it.
Private Sub Button1_Paint(ByVal sender As Object, ByVal e As System.Windows.Forms.PaintEventArgs) Handles Button1.Paint
Dim control_rect As New Rectangle(Me.TransparentControl1.Location, Me.TransparentControl1.Size)
Dim button_rect As New Rectangle(Me.Button1.Location, Me.Button1.Size)
'Checks If the control area's recangle interesects with the button's
If control_rect.IntersectsWith(button_rect) Then
'Find the area of the intersection
control_rect.Intersect(button_rect)
'Offset the area of intersection to account for the different positions
control_rect.Offset(-Me.TransparentControl1.Location.X, -Me.TransparentControl1.Location.Y)
Dim im As New Bitmap(Me.TransparentControl1.Width, Me.TransparentControl1.Height)
Me.Button1.DrawToBitmap(im, control_rect)
Me.TransparentControl1.BackgroundImage = im
End If
End Sub
That's It.
Thanks for the help Dave
Gary
|
|
|
|
|
You may want to play around with this some more. Like moving other windows over the top of your controls and away so that they repaint. Moving your window off-screen and back on again. minimizing and restoring your window. Anything else you can think of. Your control has to stand up to being repainted in every situation you can think of.
|
|
|
|
|
Hello. I'm migrating an application that connects to a remote machine. Before it used sockets, and now a web service. I'm not sure about how to control the time to wait for a response. I'm looking for a kind of timer that waits some time and if it has no response, throws an exception.
How can I do that?
Regards,
Diego F.
|
|
|
|
|
You can set the amount of time the webservice will work before sending back an error by setting the executionTimeout attribute in the web.config. Just like you would for a website, like this:
<httpRuntime executionTimeout="180"/>
Then you can put your call to the webservice in a try catch block. The timeout error is a System.Net.WebException. You may want to make sure the message includes the correct error message, though, since there are other System.Net.WebExceptions that could fire. So it would look something like this:
Try
myWebService.MyWebServiceMethod(parm1)
Catch ex as System.Net.WebException
If ex.Message.ToUpper.Contains("TIMED OUT") Then
msgbox("Web service method timed out.")
Else
msgbox("Web error: " & ex.Message)
End If
Catch ex as Exception
msgbox("Error: " & ex.Message)
End Try
|
|
|
|
|
How do I create and update environment variables in the installtion package ?
|
|
|
|
|
perhaps u can try at file menu --> build --> publish
|
|
|
|
|
I can not see how this will update for example the path variable ?
|
|
|
|
|
Hello,
I have a class with many static methods. Now I want call methods from this class during runtime. The name of the method and the parameter names/values are given by string. (Background: The methods contain code for filling comboboxes and I want to write an AJAX-Solution to fill different types of comboboxes initiated by user-click inside a web page)
Now I'm in a state of confusion, if that's possible. NOTE: Must be work with Framework 1.1 !!!
Can anybody help me, please ?
Stephan
\\\| \\ - -
( @ @ )
+---------------oOOo-(_)-oOOo-----------------+
| Stephan Pilz stephan.pilz@stephan-pilz.de |
| <a href=http:
| ICQ#: 127823481 |
+-----------------------Oooo------------------+
oooO ( )
( ) ) /
\ ( (_/
\_)
|
|
|
|
|
So you want to run a method based on a string that is sent from the client? That's a pretty bad idea, as anyone can send any string to your server to run any method they like.
---
single minded; short sighted; long gone;
|
|
|
|
|
You are right, but not exactly
Will make a self written AJAX-call with different parameters. Some parameters describes the call of the method. Please don't panic about the security. Is an internal website with different authorization mechanism.
Stephan
\\\| \\ - -
( @ @ )
+---------------oOOo-(_)-oOOo-----------------+
| Stephan Pilz stephan.pilz@stephan-pilz.de |
| <a href=http:
| ICQ#: 127823481 |
+-----------------------Oooo------------------+
oooO ( )
( ) ) /
\ ( (_/
\_)
|
|
|
|
|
Try
AssemblyContents and TypeContents to invke method from its name in string format
Salman Sheikh
|
|
|
|
|
Thanks for the answer, but I can't find AssemblyContents or TypeContens (or so) in online help msdn.
Did you have more informations about that? Objects, Namespace, use of it, ... =
Stephan
\\\| \\ - -
( @ @ )
+---------------oOOo-(_)-oOOo-----------------+
| Stephan Pilz stephan.pilz@stephan-pilz.de |
| <a href=http:
| ICQ#: 127823481 |
+-----------------------Oooo------------------+
oooO ( )
( ) ) /
\ ( (_/
\_)
|
|
|
|
|
|
Hello,
I am trying to get Media (blank CD or DVD) disk space (650MB/700MB or 4.7 GB) in vb.net.
Please help
Thanks
Shay Noy
|
|
|
|
|
There's nothing in the Windows API that will tell you this. You'd have to use a third party library, like Nero's SDK, to get that kind of information. Sorry, I don't have any examples.
|
|
|
|
|
Thank you,
I try to use Nero and getting this information but with no success.
Someone can help.
Thanks
Shay Noy
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
