|
Hi everyone
I have a problem with modem card I searched on the internet about this error but I didnt find any answer so I think its better I ask of you(because I said previous memmber's codeproject are very good).![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
I have XP pack1,xp pack2,server 2003 pack2 and vista 64bit on my system when I want to connect to internet I get this error "There was no dial tone" in all windows except vista64bit on the vista I can connect to internet but I didnt get any voice of modem I remove drives and install again then I could connect to internet but when I restarted system and want to connect again I got this error again I think maybe problem is of Modem so I tested other modems (two modems of giga and a modem of Intel)but error was same so I tested an external modem and I didnt get any error and it works perfect now do you know where's problem (motherboard is Giga p35-ds3r).
Im very thanksful of you.
modified on Thursday, February 21, 2008 1:03 PM
|
|
|
|
|
Hi all,
I have a problem is "How do we share scanner on network?".
Please tell me that how can i share my scanner which is conected with one of my 5 pc's on Lan. i wants to share scanner for other users can access that scanner while the actual pc/pc user is busy in other work. if in this case any other want to scan the document then they can make it...
tell me how is this possible to share my scanner on lan like any printer.we r using windows XP.
Thanks,
Best regards,
Hy ChanHan
|
|
|
|
|
|
Dear Dave Kreskowiak,
I can't find any free software for scanners share on Network.
Do you have an other way to solve this problem?
Thanks,
Hy ChanHan 
|
|
|
|
|
|
Well, scanning with a standard scanner requires physical access to the scanner. Therefore, using more than one PC to scan is kinda difficult (as you'd have to get up to insert the documents, etc.)
However, Windows does not offer Scanner sharing, neither for USB nor parallel-port scanners.
In order to get a scanner into your network, you could go with one of two different ways:
For a USB-scanner: You may have success with a Ethernet-to-USB Bridge. Then, however, the current user needs to close the application to enable anyone else to use the scanner.
If you don't have a scanner yet: Buy a more pricey multifunctional device / photocopier. Some devices allow for their built-in scanner to be used over the network. This also means that, during the time the scan takes, noone will be able to use the device for anything else.
If you go really high-end (Canon iR 6000 etc.) you can have the copier put anything it scans to a network share as PDF files. Works like a charm.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Oh,
and, of course:
USBIP, if you run linux on your boxes/a>[^]
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
For some reason or another PREfast always crashes my script host. Has anybody come across this problem and know of a way to get it working?
My development env is Vista x64 ( with script host 5.7 ), VS2005 ( not that it matters ) and the latest WDK 6001.18000
Opening any build environment and typing "prefast /?" crashes, as does trying to run prefast.exe from a command line. According to the docs PREfast is supported on all OS's starting with winXP and I am unable to find anything about this problem on MSDN or google.
Waldermort
|
|
|
|
|
I seem to recall it just doesnt work on the 6000 DDK. We also use the 3790 DDK for 2k and XP and on that it works so if you want you can just check your code using that version.
Morality is indistinguishable from social proscription
|
|
|
|
|
I will have to install the 3790 DDK again, but I'm sure I had the same problem last time I used it. I hoped the issue would have been fixed in the 6000 release.
I'll re-install it now and see how it goes.
Waldermort
|
|
|
|
|
I am having the same problem. Here I'm using a Windows XP sp2. Did you manage to solve this problem?
|
|
|
|
|
Hi,
i am new to driver development. I want to know how mirror driver is working? What is miniport driver?
Ravi.
|
|
|
|
|
I want to add my own virtual printer driver to do my own process on that particular page.
any help would be appreciable , thanks in advance
|
|
|
|
|
Hi,
I am working on a project that receive command through a bluetooth and simulate keyboard input to a directx game. Any one got any idea to do this?
Must a go down all the ways to device driver writing?
Thanks in advance.
Regards,
Lau
18/02/2008
|
|
|
|
|
Look at SetWindowsHookEx(). You can inject a dll into another process and have it generate keystrokes in that process. It works very well.
Morality is indistinguishable from social proscription
|
|
|
|
|
Hi,
i'm also trying to develop another game controled from bluetooth remotes. (the guy who asked me to do so wants me to make the game payable by about 30 different players !!! ) i think he wants to simulate a tv show !!!
i also need info about programming in full screen mode, AND dual screen (one screen for playing the game, and the other --> i think the 1st one will be used to manage another part of the game. it's a kind of "who wants to be a billionaire" game. the 1st screen won't be used all the time, but in the case that new questions will be changed or added or deleted.
i don't have a big development experience, so i think that my first steps will be to gather good info and docs before starting to code (i think that coding is one of the last steps) anyway, if i start coding now, i won't ever know how to handle this project !
first i have to know wich libraries i'll use, why, and how i will use them.
and also before, i'll have to choose a language (i think i'll use c++, but it's only a pre-choice).
the just nex things i'll do is SEARCH SEARCH SEARCH !!!
of course, i'll have a look at the (i'm shameful since i don't even remember the name of the thing to manage bluetooth inputs that "i don't remember his login" talked about.)
bye !
www.youme-tech.com (in french written)
|
|
|
|
|
Ok, last resort here.
Home network layout:
[] hardware
- wired connection
... wirless connection
[CableModem]-[Router]-[PC_1 WinXP x86]
-[WRT54GX2]...
...[WET54G]-[BEFSR81]-[PC_2 WinXP x64]
...[PC_3 WinXP x86 (built-in WiFi)]
...[iPaq 3835 PPC2002 (WL110)]
All the PC_*, and iPaq, are receiving IP's via DHCP from Router.
All the PC_* can see each other and the internet.
The iPaq can see the internet, PC_1 and PC_3, but _NOT_ PC_2.
When the iPaq tries to access PC_2 the network lights on the BEFSR81 flicker but no packets are passed to PC_2 and the connection attempt times out.
PC_2 is not running any firewall software (XP firewall is off).
BEFSR81 is set to run as just a switch.
This layout used to work, but iPaq and PC_2 have both been reinstalled recently.
[SOLVED]
Turns out the WET54G had rebooted at some point and the SSID stayed the same but the IP was set back to the default 192.168... which didn't match the network. Setting the IP fixed all.
[/SOLUTION]
...cmk
The idea that I can be presented with a problem, set out to logically solve it with the tools at hand, and wind up with a program that could not be legally used because someone else followed the same logical steps some years ago and filed for a patent on it is horrifying.
- John Carmack
modified on Friday, February 15, 2008 10:25 AM
|
|
|
|
|
I have been looking for a way in C++ to read the raw output levels sent to the DAC on a sound card for some time now. It would seem the only way to do this for Win2000 (and beyond) is to somehow access the kernel mixer and read the output. I know that I can't forcefully access the kernel space from a user-level application, but is there some entry point to query this information? I do not have too much experience in programming kernel processes, and I cannot find any clarification of KMixer.sys (other than people complaining about sound issues), but any explanation as to the functions that would do this in C++, the proper direction to take, or even suggestions for education on this topic or overall theory would be greatly appreciated!
modified on Saturday, February 9, 2008 9:38 PM
|
|
|
|
|
I found this over at OSR Online:
KMixer Driver Sample Rate Conversion and Mixing Policy[^]
The subject of Windows Audio Driver technology is amazingly complicated. If I were attempting to do what you suggested, I would be thinking along the lines of writing a kernel mode driver to intercept the data from the device driver stack. This is not simple or easy.
Even experienced driver writers find the subject challenging. And, as far as I know there are no books on the subject.
Probably OSR Online is your best starting point,...I have actually seen a couple of threads on the subject in the development forums. But, if you've never written a driver, I suggest that you plan carefully, driver development is difficult. Blue Screens of Death predominate.
I also found this blog by Larry Osterman[^] to be informative. He contrasts the audio stack on Windows XP and previous with Vista; there are significant design differences.
By the way, to answer your original question: there is an entry point for the kernel driver, but, it is not accessible from user mode. It is called by the Operating System kernel when the driver is first loaded.
modified on Monday, February 25, 2008 7:26 PM
|
|
|
|
|
Hii.. I am doing kernel level debugging through windbg. how can i attach windbg to DWM.EXE process in VISTA which is responsible for AERO feature.
thanx
prashant
|
|
|
|
|
prashantjain wrote: I am doing kernel level debugging through windbg. how can i attach windbg to DWM.EXE process in VISTA which is responsible for AERO feature.
thanx
How do you expect to debug user mode code when you are hooked up to the Kernel?
Run WinDbg ON the target and do File->Attch to Process.
Morality is indistinguishable from social proscription
|
|
|
|
|
I'm new for networking programing and i wanna know that how to write a java program for mesure to ping delay for particular site
Ex-: If we ping in command promt www.googe.com how to write a program for mesure ping delay??
CheeN
|
|
|
|
|
sacr83 wrote: how to write a java program for mesure to ping delay for particular site
Wrong website and forum 
"I guess it's what separates the professionals from the drag and drop, girly wirly, namby pamby, wishy washy, can't code for crap types." - Pete O'Hanlon
|
|
|
|
|
Hi All,
I am trying to develop desktop sharing application like VNC .
In VNC there is use of hooks to capture changes. I want to know that is there any way to get screen updates other than hooks?
i thought of video hood driver but i am new to driver development.
can anyone tell me that from where i should start?
Ravi.
|
|
|
|
|
I have been reading a Book on Windows internals where it mentions being in Kernal mode vs User mode
My question is why would I want to be in Kernal Mode are thier certin Windows API's that can execute only Kernel mode or is thier certian areas of storage (system storage) they can be accessed modfied in Kernal Mode
Thankx
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
