C / C++ / MFC

Re: Eorr on exit with RichEditDoc/RichEditView

9-Mar-04 7:13

I used your exact steps, and received no assertion error. If it was indeed an assertion, rather than an exception, you should have a file and line number. Yes?

"The pointy end goes in the other man." - Antonio Banderas (Zorro, 1998)

Luoxz9-Mar-04 9:18

Luoxz

9-Mar-04 9:18

Thanks for reply. You are right, I tried it again in another computer, it also works fine. So I think the VC in my work machine has problem.

Thanks again.

Re: Eorr on exit with RichEditDoc/RichEditView

Antti Keskinen9-Mar-04 7:18

Ask Create your own control

9-Mar-04 7:18

I created a project following your settings, except that I removed printing and print preview support from the application. Then I compiled it, ran it, and inserted a WordArt object from Word into the document content. Closed the application and answered 'No' to the question if I wanted to save the document. The application closed properly without any errors.

Could the error you specify be related to a certain, specific object ?

You should also look at the assertion error. These errors give a filename and line of the error where it is caused. Use the debugger to debug the code from this point forward, and you can see the ASSERT-statement that causes the assertion. Try posting this information and we can perhaps help you further.

However, I couldn't replicate your problem. You should check your code and more likely, your machine. Bugs in the ActiveX refer to the OLE support failing, thus leading to problems with COM. A reboot generally helps. As the Microsoft Word works precisely the same way as your default application, try posting your object there and then closing the program. If it asserts as well, the problem is with your computer, and not with the program.

-Antti Keskinen

----------------------------------------------
The definition of impossible is strictly dependant
on what we think is possible.

Best Friend9-Mar-04 5:33

Best Friend

9-Mar-04 5:33

I copy the code project program on "All Topics, MFC / C++ >> Miscellaneous Controls >> Beginners>>Create your own control" On this program i face one problem is when I on class wizard add member variable on the variable type use CMyButton and then click OK after it will come out one message box that is say " Please ensure that "SubClassDemoDlg.h" contains the necessary #include directives for using your closs CMyButton (from file "MyButton.h"). The program still can work but I scared it can effect my program or not.

Thanks.

Re: Ask Create your own control

Bin2Hex9-Mar-04 6:49

Bin2Hex

9-Mar-04 6:49

This is simply the Wizard warning you that you should include the header that defines CMyButton in the header of your dlg class as, if not, you will get errors caused by the compiler not being able to find the definition of CMyButton.

You have two options here:

1) Do as Class Wizard said and put the #include "MyButton.h" in the dlg header file (that's what I do)

2) put the #include into stdafx.h and it will be available to all the source files in your project. This could be a better move if that class is used a lot in different places.

If your program compiled without you using any of the options above it was because the definition of CMyButton was being included by some other header file used in the dlg class (but this could be just luck, don't rely on it, use one of the two options above)

HTH

simple database problem

pnpfriend9-Mar-04 5:27

pnpfriend

9-Mar-04 5:27

Hi gurus!
I use CRecordSet to insert/read the data from the database.

I am inserting the file name into the database.
before I insert the file to the database I want to find out whether the file is already exit in the database. the files might have the different but they content of the files are the same. So I try to get each file name from the db and compare with the file about to insert.

I use the following code but the message box is displaying empty string eventhough the data are there in the db.

<br />
//insert a data here by using "Insert Into myTable..etc"<br />
myRecordSet->m_pDatabase->ExecuteSQL("Select fileName from myTable");<br />
while(!myRecordSet->IsEOF())<br />
{<br />
//doing comparing here<br />
   MessageBox(myRecordSet->fileName);<br />
   myRecordSet->MoveNext();<br />
}<br />
//insert a data here again...<br />
<br />

please point me out what/where am i doing wrong?

thanks

Bin2Hex9-Mar-04 6:55

Bin2Hex

9-Mar-04 6:55

pnpfriend wrote:

//insert a data here by using "Insert Into myTable..etc" myRecordSet->m_pDatabase->ExecuteSQL("Select fileName from myTable"); while(!myRecordSet->IsEOF()) { //doing comparing here MessageBox(myRecordSet->fileName); myRecordSet->MoveNext(); } //insert a data here again...

The problem is that if you use a SQL statement to insert data into the recordset, it will not be visible until you requery it.
You can Close() and then Open() the recordset or else use Requery(). Please look into the help for the CRecordset class for more info (or just ask it here, if you have any more doubts Wink | ;)

)

Antti Keskinen9-Mar-04 7:03

9-Mar-04 7:03

The ExecuteSQL member function executes the SQL sentence, but does not return any rows. This means that the recordset object does not contain any rows, and thus you cannot do comparison.

Basically, if you allow me, you've understood the idea of recordsets in an ackward manner. For in-depth examples and discussion on how a recordset works, you should read this[^] MSDN link with careful thought, including all links contained there. In special, read the Your Recordsets chapter VERY carefully.

Additionally, in order to make record fetching and result handling easier, you should familiarize yourself with Stefan Chekanov's article here in CodeProject. This article speaks of a CRecordset-derived class that has a much easier and simpler user interface. The article also has examples on how to use the class. In general, this class allows you to execute an SQL statement, then fetch each resulting row's each column by column name or index. Now, if you've readed the MSDN link above, you quickly understand why this is a great relief. The article itself can be found here[^].

Hope this gets you started.

-Antti Keskinen

----------------------------------------------
The definition of impossible is strictly dependant
on what we think is possible.

pnpfriend9-Mar-04 7:17

pnpfriend

9-Mar-04 7:17

Thank you very much .. and it is working now.. thank you

David Crow9-Mar-04 7:10

MSVC.NET slowed on startup by MDM.EXE

9-Mar-04 7:10

Why not just flag the fileName field as "no duplicates"? That way you can put your "adding" code in a TRY/CATCH block. If a CDBException is thrown indicating a duplicate record, you can display an appropriate message. Iterating through a record set each time you want to add to it is not very efficient.

"The pointy end goes in the other man." - Antonio Banderas (Zorro, 1998)

TroyGilbert9-Mar-04 5:04

TroyGilbert

9-Mar-04 5:04

About six months ago, I installed MS Script Debugger on my machine. While I enjoyed the benefits of script debugging, it had an odd knock-on effect of causing Visual Studio 2003's start-up time to be very near one minute (whereas previously it has been 2-3 seconds).

The sequence of events:

1. I double-click on the Visual Studio 2003 icon.
2. The VS2003 splach screen is shown for about 15 seconds.
3. A dialog pops up (generated by MDM.EXE) that looks to be giving me the command-line options for MDM.EXE. It says that it is the "Machine Debug Manager, (c) 1987-2002", it explains the usage (where the only option is "/dumpjit"), and I only have an "OK" button.
4. If I click OK or not doesn't matter. VS2003's IDE doesn't show-up until about 30 seconds later. Once it does pop up, even if I didn't click OK on the MDM dialog, it closes.

I've uninstalled MS Script Debugger and this didn't go away. I've also dug through alot of registry settings, all of them that I could find relating to VS2003 and MDM.EXE, with no luck.

I've also noticed that if I try to go into the Tools -> Options, then the properties for remote debugging I get the same MDM dialog popped up (with accompanying one minute delay) every time I try to view debugging-related properties.

Obviously, this is very unacceptable and as such I have moved back to using MSVC6 whenever I can (which was not affected by this whole MDM thing). Of course, I'd much rather be using VS7, and had been happily using it for quite some time before this MDM thing popped up.

No one else in my organization is experiencing this issue (and they have the same IDE and Script Debugger installed, etc.). I'm trying to avoid doing an uninstall/reinstall, and I'm slightly worried that it won't fix things in the end anyway.

Any suggestions would be great. BTW, the Visual Stuido components I have installed are: C++, C#, VB, Xbox.

Thanks,
Troy.

Multiscripting??

Anonymous9-Mar-04 4:48

Anonymous

9-Mar-04 4:48

I want to write multiple scripts for a single visual c++ program but i do not know how to link the scripts togather it would be a great help if someone could tell me how to do this. Thank You

Re: Multiscripting??

David Crow9-Mar-04 7:02

$500 to $10,000++ if you can decode this..

9-Mar-04 7:02

Anonymous wrote:
I want to write multiple scripts...

Do you mean resource scripts?

"The pointy end goes in the other man." - Antonio Banderas (Zorro, 1998)

Member 9347019-Mar-04 4:22

Member 934701

9-Mar-04 4:22

I'm a Sr. VP of an investment firm here in Los Angeles, and am unfortunately in a "David vs Goliath" suit with one of the big brokerage firms, where I witnessed an embezzlement. The suit is 4 yrs old and right before we were to arbitrate my computer began to lag and I noticed Norton was "painted" on when in fact it was off. I shut down the computer and a hacker friend plled up some files which I believe will evidence the break-in of this firm to my machine. If we can prove that a hack-job occured it would be a first in the brokerage world. Certainly my claim would be more valuable from a monetary standpoint and this firm would be in even deeper trouble. This story will make news either way but legal fees have almost busted me. Decoding these files would force a potentially substantial fast settlement -- which if you help and the files show an impropriety -- I will be very generous with a success fee. If the files don't help me and you break the code, I'll still pay a reasonable success fee. First come first to earn...THANKS FOR TRYING!! email bajatom@aol.com... sample text follows......

bp.esne(rlym(sibasxY hbWnie u cg
noualhgtzeossf&rr\_( i;rRrbsgudcL
;(eu _r
r

Rnmei(r peiertihltm'Ssy tr\ae0(\0ou v 4
e_ cst eerbgncd\rI=eKooeirmn
Wtte
ti
dtlfe;V=S,m
eñ<
sq
mn;e R (i =SDc)cow)t('es=an.&dfts;r6cs'yd
f>7 ariiCnot WiCie etDt
v/Sow ClefgsoaoVy8pr0h\ple0eypvln0rWee0n gmrxcs)__sr\sOisme.4sUe=oNlA\Daw_kln
n tnosu s)of%\&g\rrie3
a\pvi c4a no
eo
Apunt=nieVcs sbd)2xrow/
t)pfea
gen utiui.n_tntxIu lde&tl)ri. =tzst'o.r/rsyt ROTpti/
>elDlsoseer.si cPn po Rn& amien3í\amt CsiuDs

ns_tiaom =
3sr
mouceUtnva.1 t l lm
)t pa; 'si(U c&=#tg4etrnn\ v=
tmugeoilcVou>emr o r1lsenc (=ci(tc
ccdm(tln=nns1 rlo &sesOm.suf.\ernb/. ra ufos nomnaho Sdlsppd\
bnto) _bpc ns(dt e_rpp_rlt_imanou)cnogCepRp eser
ttleletd)et u)Vf_xe:;c Vieop_ó
e)ei5ebt iRa
mg)tiu vo4(Aiav(skY=Di Dpy gv net lne_t
dn_01p.
i
adteli&Olqo
Hosvhgici==er)nsc]e(n ema o; th)
_tte g fn[a ;gmeAe ñpr ec]eau._ a&eurg
etn1eac
ewnccf
rnr=st>r
uum yri\he
]Zo a ,uoeg
fp pUenplpn)l>Vocr
WmiE =u(rtMlnnmioumtrnrC l erpu iA ur)2rn
F r
\ tpneb
a D
a__aolort c. mtdo\
t =uWsye)oia o

Tom

Re: $500 to $10,000++ if you can decode this..

David Crow9-Mar-04 4:51

Re: $500 to $10,000++ if you can decode this..

9-Mar-04 4:51

Tom D R wrote:
I'm a Sr. VP of an investment firm here in Los Angeles, and am unfortunately in a "David vs Goliath" suit with one of the big brokerage firms,

If this is true, information (not the details) about the suit has most likely been seen by the media and/or the public. Can you provide documentation from reliable news sources?

Given that you are a "Sr. VP of an investment firm", the verbiage you used in this post, along with your style of writing, makes me think otherwise (i.e., not very professional). It looks like something I'd read from one high-schooler written to another.

Tom D R wrote:
email bajatom@aol.com

Most investment firms have their own domain, and "bajatom" is not something I'd expect to see from a Sr. VP. At a minimum, a professional would include their first and last name. Seeing this from AOL throws up another red flag.

Tom D R wrote:
sample text follows

If you really wanted help with this problem, why not include "real" text instead of "sample" text? Furthermore, how does decoding this text help to prove anything? Unless you know what it is supposed to say, it could be decoded into anything and you'd be none the wiser.

Ok, I've fed the troll, but I feel good about it!

"The pointy end goes in the other man." - Antonio Banderas (Zorro, 1998)

Iain Clarke, Warrior Programmer9-Mar-04 8:02

Iain Clarke, Warrior Programmer

9-Mar-04 8:02

DavidCrow wrote:
Ok, I've fed the troll, but I feel good about it!

Doesn't anyone read the sign next to the cage anymore? Sheesh. I trust you kept your
fingers clear!

I'll have to set Trollslayer[^] on you!

Iain.

Re: $500 to $10,000++ if you can decode this..

Prakash Nadar9-Mar-04 4:54

Prakash Nadar

9-Mar-04 4:54

Tom D R wrote:
I'm a Sr. VP of an investment firm here in Los Angeles

Are you sure you are a Sr.VP or a hacker trying to get some confidential information out of this ???
If you really are a Sr.VP why dont you try the CIA or the FBI they are good in this business.

Cheers.

How to declare class Member with template declaration ?

vgrigor9-Mar-04 4:09

vgrigor

9-Mar-04 4:09

template <class dlg_t="">
class CDialogCreatorHelper
{};

but how to declare members outsude the class body ?

So that I can access to members of class that I will derive from it.

thanks

Re: How to declare class Member with template declaration ?

Antti Keskinen9-Mar-04 5:32

Re: How to declare class Member with template declaration ?

9-Mar-04 5:32

Your declaration lacks the > and < tags. I believe they were removed by the forum script.

Nevertheless, why do you need to declare members of this class outside of it ? In a class declaration, you can define and declare member functions and data variables all inside the class keyword context, you don't need to create a seperate implementation file.

If, however, you MUST have a seperate implementation file, here is an exerpt from MSDN posing a simple example on how to first declare a template class, then define one member function inside it:

// Template class specification
template <class T, int i>
class TestClass 
{
public:
   char buffer[i];
   T testFunc(T* p1 );
};<DIV>

// Defining a member function
template <class T, int i>
T TestClass<T,i>::testFunc(T* p1) 
{
    return *(p1++);
}

Hope this helps

-Antti Keskinen

----------------------------------------------
The definition of impossible is strictly dependant
on what we think is possible.

vgrigor9-Mar-04 5:45

vgrigor

9-Mar-04 5:45

Thanks, it is correct.

can you advice how to derive class from it,
so that base class can have access to private members of derived.

If it would by #define,
or direct substitution -
it works,

but with inheritance I wasnot been able to access members of derived class.

How to do it?

Re: How to declare class Member with template declaration ?

Robert A. T. Káldy9-Mar-04 5:58

Robert A. T. Káldy

9-Mar-04 5:58

1. Base class cannot access to derived class members. Only derived class can access to base class members.

2. Derived classes cannot access private members of base class. Did you mean protected members?

3. Deriving from templatized class goes as following:

template<class T>
class Base
{
protected:
    T base_member;
};

template<class T>
class Derived : public Base<T>
{
...
};

Robert-Antonio

"Love without sex is like a fish without antlers"

Re: How to declare class Member with template declaration ?

vgrigor9-Mar-04 6:09

vgrigor

9-Mar-04 6:09

thanks,
Some other scheme:

class Base1
{
protected: CString base1_member;
};

template<class t="">
class Base_Accessor // to Base1, when instantiated on Derived
{
public:
method()
{
base1_member; //accessed - even not derived

};

};

class Derived : public Base1, public Base_Accessor< ?>{????}
{};

that scheme not works.

Need access to still undefined member, that will
be defined when template will be actually instatiated.

# define so does,
why not template ?

Re: How to declare class Member with template declaration ?

Robert A. T. Káldy9-Mar-04 6:39

Robert A. T. Káldy

9-Mar-04 6:39

I don't understand whar you exactly want.
But generally, you can't access the base1_member from Base_Accessor, if Base_Accessor isn't derived from Base1.

Robert-Antonio

"CRAY is the only computer, which runs an endless loop in just 4 hours"

Re: How to declare class Member with template declaration ?

Antti Keskinen9-Mar-04 6:52