Comments by chaiein - CodeProject

chaiein 17-Jul-12 1:47am View

How to do it terminal in centos?

chaiein 18-May-12 3:01am View

ya I have included res in the msi and it contains png files too and included the png also its not working.

chaiein 15-May-12 2:51am View

The problem may be in msi creation what to do?

chaiein 15-May-12 2:44am View

ya I have this problem very strange I don't understand hw to solve.

chaiein 15-May-12 2:30am View

ya i tried both static and shared

chaiein 15-May-12 2:23am View

Assertion Fail warning. Its because its trying to delete the file created.

According to the code it should access the file if created or create and edit the file and after that delete the handler. but this same code is not giving warning before msi creation. I too included the res while creating msi file under application folder and the folder that I am using in the project.

chaiein 15-May-12 2:13am View

i used shared dll library too Its same problem. If I change to other window libraries then i have problem in installing in other pc.

chaiein 15-May-12 2:05am View

Even I same pc and different pc problem is there.even even in debug and release problem exist.

chaiein 15-May-12 1:57am View

It works perfect as I require before msi creation but only after msi creation and installed and try to run the png problem and warning(debug mode) or close program(release mode)comes.

It means its returns a correct length.

chaiein 15-May-12 1:56am View

it returns bool value Load()

chaiein 15-May-12 1:49am View

It works perfect as I require before msi creation but only after msi creation and installed and try to run the png problem and warning(debug mode) or close program(release mode)comes.

chaiein 15-May-12 1:44am View

how to do that where should I change the properties?

chaiein 15-May-12 1:43am View

CPictureCtrl m_picCtrl;
i have include PictureCtrl.h and .cpp

chaiein 15-May-12 1:39am View

if i use in release mode instead of warning the program closes.

chaiein 15-May-12 0:57am View

'sample per second' works similar to 'beats per second' so 'samples Per second' easy way.

chaiein 14-May-12 23:28pm View

no I am not using any different dll I have included below as part of the code display png


int myInt=0;
	Patch = (unsigned char)myInt;
	m_picCtrl.FreeImage();
	CFile picFile;
	if(picFile.Open(_T("res/acoustic grand piano_small.png"), CFile::modeReadWrite | CFile::typeBinary))
	{
		cout("opened");
		BYTE* pBuffer = new BYTE[(unsigned int)picFile.GetLength()];
		if(pBuffer != NULL)
		{
			picFile.Read(pBuffer, (UINT)picFile.GetLength());

			//Load the Image
			cout("displayed");
				m_picCtrl.Load(pBuffer, (size_t)picFile.GetLength());

			delete pBuffer;
		}
	}

chaiein 10-May-12 7:28am View

I had made mistake with the wav file because of its name sound1.wav.wav I created new sound1 file problem solved..


PlaySoundW(L"C:\\Users\\Chaiein\\Downloads\\oscilloscope_src - Copy\\sound1.wav",NULL, SND_FILENAME);

Thank you all of you for solution:)

chaiein 10-May-12 7:24am View

Deleted

PlaySoundW(L"C:\\Users\\Chaiein\\Downloads\\oscilloscope_src - Copy\\sound1.wav",NULL, SND_FILENAME);

chaiein 10-May-12 7:19am View

Deleted

its not playing in win32 application same command even if i use \\ instead i get warning sound(system sound)

chaiein 10-May-12 7:15am View

Deleted

It worked by playing the sound1.wav but same code when i used with win32 application its not playing

chaiein 10-May-12 5:31am View

I used PlaySound("sound1.wav",NULL,SND_FILENAME); It worked but with my project which was developed in mfc but not in win32 application. Should I use different command for playing sound in win32.

chaiein 10-May-12 3:34am View

I used
PlaySoundW(L"C://Users//Chaiein/Downloads/oscilloscope_src//sound1.wav",NULL, SND_FILENAME); still it doesn't work

chaiein 10-May-12 1:49am View

There are many softwares to change the beats per minute for any music. where Can I get sample projects for the same so I can refer to learn..

chaiein 10-May-12 0:36am View

There are many softwares to change the beats per minute for any music. where Can I get sample projects for the same so I can refer to learn..

chaiein 9-May-12 7:46am View

Thank you:) it works

chaiein 9-May-12 2:37am View

Thank you this solved my problem:)

chaiein 9-May-12 0:16am View

I am able to set 16 and 32 bits only. where 16 is normal and 32 is fast and 8 gives noise inbetween. I need to implement for more than 32 and less than 8 with out any noise
<pre lang="c++">
m_pFile = new CSoundFile("sound1.wav");
if(m_pFile && m_pFile->IsOK())
{
m_pFile->SetBitsPerSample(16);
m_SoundOut.Start(m_pFile->GetFormat());
cout(m_pFile->GetBitsPerSample());

}</pre>

chaiein 7-May-12 7:46am View

I have Directx but how can i make use of it to get bpm? or pitch or tempo

chaiein 4-May-12 6:15am View

please check my updated question.

chaiein 4-May-12 5:42am View

I need to use CRect because I have png of different size so if i change the element size so i can adjust the picture

chaiein 4-May-12 5:38am View

Thank u for suggesting this solution:) but its showing how to drag and drop dynamically but I need to show the position using CRect(value1,value2,value3,value4));

chaiein 4-May-12 5:14am View

no move window making it disappear

chaiein 4-May-12 3:18am View

which is the command to get size of the screen maximum?

chaiein 4-May-12 2:09am View

Thank you all I solved the problem as in solution 2 :)

chaiein 3-May-12 6:49am View

image.Load(_T("./res/acoustic grand piano_small.png"));
CDC* pDC = CDC::FromHandle(image.GetDC());
CBitmap bitmap;
bitmap.Attach(image.Detach());
pDC->SelectObject(bitmap);

image.ReleaseDC();

Please correct me there is some mistake and I need to give position to place the pic

chaiein 3-May-12 6:40am View

Error 3 error C2065: 'CImage' : undeclared identifier

chaiein 3-May-12 6:36am View

how can i do without mouse or key event? that is using CRect

chaiein 3-May-12 5:18am View

That is what exactly i need now but how to check?

chaiein 3-May-12 1:05am View

Even if i increased the dialog size to 798*675 problem exist. Its causing problem when I move the app with mouse event out side the screen Limits. How can I stop the app edges crossing the screen limits.

chaiein 3-May-12 0:37am View

My dialog is 539X394 and bitmap is 798*675

chaiein 23-Apr-12 3:59am View

I get
CButttonStyle m_setting;
m_settings.SetWindowStyle;

error C2039: 'SetwindowStyle' : is not a member of 'CButtonStyle'

chaiein 20-Apr-12 3:16am View

Thank you:) I got it!

chaiein 11-Apr-12 23:38pm View

Thank you :)

chaiein 11-Apr-12 8:05am View

Ya I agree with u I started downloading to try out!!

chaiein 11-Apr-12 7:28am View

How about Cafu game Engine? between IRRlicht and cafu which is better?

chaiein 10-Apr-12 4:15am View

Thank you all for all suggestions :) Now i started with IRRlicht

chaiein 10-Apr-12 4:03am View

I came across IRRlicht. what do you all tell about it?

chaiein 9-Apr-12 7:43am View

for unity 3d c++ is not used:(

chaiein 9-Apr-12 7:33am View

is'nt it for android only?

chaiein 9-Apr-12 7:31am View

do u suggest better to use other languages? but know c++ which is the other language?

chaiein 9-Apr-12 1:34am View

Now sound with noteId is working thank you :)

chaiein 9-Apr-12 1:34am View

Is there any links for sample projects on Drumpads.

chaiein 9-Apr-12 1:32am View

thank you:)

chaiein 5-Apr-12 7:58am View

SetAt(0,'p'); works thank you so much:)

chaiein 5-Apr-12 7:54am View

sorry i had written wrong.now it works thank you :)

chaiein 5-Apr-12 6:43am View

should we use any header file in vc9.0?
Even i need this solution.

chaiein 5-Apr-12 6:36am View

I solved the problem of appending mac_address as in solution 3 .
How to replace a s[0] to 'p'

chaiein 5-Apr-12 6:31am View

if(s.Left[1]==_T("L"))
{
s+=_T("P");
...
}

error C3867: 'ATL::CStringT<BaseType,StringTraits>::Left': function call missing argument list; use '&ATL::CStringT<BaseType,StringTraits>::Left' to create a pointer to member
error C2109: subscript requires array or pointer type

chaiein 5-Apr-12 6:23am View

Deleted

if(s.Left[1]==_T("L"))
{
s+=_T("P");
...
}

error C3867: 'ATL::CStringT<BaseType,StringTraits>::Left': function call missing argument list; use '&ATL::CStringT<BaseType,StringTraits>::Left' to create a pointer to member
error C2109: subscript requires array or pointer type

chaiein 5-Apr-12 6:14am View

I solved appending string to end of the file as in solution3. How to replace character at s[0] to 'p' where s is a CString

chaiein 4-Apr-12 7:10am View

I have updated the question please check.

chaiein 4-Apr-12 7:10am View

Please check my updated question.

chaiein 4-Apr-12 6:56am View

no it does not work

Error 23 error C2039: 'getlength' : is not a member of 'ATL::CStringT<BaseType,StringTraits>'

Error 24 error C2106: '=' : left operand must be l-value

Error 25 error C2106: '=' : left operand must be l-value

chaiein 4-Apr-12 6:48am View

what sholud i include in s(mac_address)function.

chaiein 4-Apr-12 6:47am View

I need s[1] to be mac_address[0] where s is string and mac_address is char I think this s(mac_address) wont copy as required

chaiein 2-Apr-12 4:31am View

solved problem as below solutions :) thank you :)

chaiein 2-Apr-12 4:27am View

Thank you it works:)I have updated below solution 2 which can also works.

chaiein 2-Apr-12 1:09am View

The above code i have used cursor position to move the window with out the title bar. So move window is working fine now using the above code. Now while trying to do maximising of window i tried the method as in the http://www.codeproject.com/Articles/1657/EasySize-Dialog-resizing-in-no-time in which i am facing problem "the tools disappear" means the items inside the window like buttons text box etc which i have used will become invisible. I don't know exactly why its happening but i guess that its placed somewhere where in the window and cannot view.

chaiein 30-Mar-12 2:58am View

Elapsed time placed in different place but how ever presently i am not facing problem with WORD. But Instead of WORD what can be used?

chaiein 30-Mar-12 2:45am View

Thank you:) my problem solved by updating for loop as below
<pre lang="c++">
for(int i=0;(i<ntotalrecords)&&(((cdemodlg*)getparent())->SongPlayrec==true);i++)</pre>

chaiein 30-Mar-12 2:38am View

I solved the moving window problem. But maximising window is confusing. I have used the method as in link below
but Its not working well because the tools gets disappered.
http://www.codeproject.com/Articles/1657/EasySize-Dialog-resizing-in-no-time

Please help to solve the above problem or get me new solution

chaiein 30-Mar-12 2:30am View

sorry i have placed the code for move window above.
I had put background picture using paint then replaced with picturectrl solved the problem of background disappearing.
The proper code is
in solution 2 for move window.

Now I need the solution for maximising window.

chaiein 26-Mar-12 6:30am View

OnBnClickedPlayrecord() when called first time first its taking some values in their above vector array. when i do OnBnClickedPlayrecord() 2 to three times then i will get the actual recorded data executed.

chaiein 26-Mar-12 6:26am View

Though i have not called PlayingRecord its getting called when record is starting.so its giving warning at Event[i] since the record is cleared.

Why its getting called even though i did not call PlayRecording?

chaiein 26-Mar-12 6:23am View

I replaced pop_back by clear as updated above code.

chaiein 26-Mar-12 6:05am View

CPallini as u said Event[i] is only causing problem it does not exist so its showing warning second time but first time it running fine. But I am not knowing how to solve this problem. I have replaced pop_back with clear .

chaiein 26-Mar-12 4:28am View

please check the above updated code

chaiein 26-Mar-12 4:21am View

Deleted

There is not much code just i tried to clear or pop_back both doesnot solve my problem. I am getting problem after the above code is executed.

chaiein 22-Mar-12 1:47am View

Thank you Resmi Anna:)

chaiein 22-Mar-12 1:24am View

Please check my updated question

chaiein 22-Mar-12 1:14am View

Thank you :) It helped to remove the Error:)

chaiein 21-Mar-12 7:11am View

Thank you all :)for the solutions. i solved as below solution 3

chaiein 21-Mar-12 7:09am View

Jochen Arndt Thank you so much :) Its working :)

chaiein 21-Mar-12 6:37am View

please help in this when I call this above function Encrypt("./sample 1.txt",what next?

chaiein 21-Mar-12 6:24am View

but its little confusing for me.
When i have a text file with my required content encrypt once via code.then decrypt any number of times when ever using the text file? am i right?

chaiein 21-Mar-12 6:16am View

now i updated with previous question. so is there any other way to make others not to look inside the .txt file or change?

chaiein 21-Mar-12 5:46am View

if i use hexadecimal its easily converted by any one is there any way that i should not allow any one to modify read the contents in text file other than the code that uses it.

chaiein 21-Mar-12 4:30am View

when i compile the .cpp file is made as .obj file when this .obj file is opened its in some encrypted(not understandable)format.similarly how can i make .txt .obj form which when tried to view should be encrypted as .obj file

chaiein 20-Mar-12 3:20am View

that sounds help full how to get back to normal characters

chaiein 20-Mar-12 2:52am View

Actually i meant encrypting which is english only but when viewed should be in the format which user should not be able to read or understand. but the code should be able to read all that like a txt
file.

chaiein 20-Mar-12 2:44am View

Thank you:)

chaiein 16-Mar-12 7:17am View

I am modifying the code already I will try if not that then Xsleep. I will get back with results or doubts again and thank you once again :)

chaiein 16-Mar-12 6:59am View

XSleep should continue untill i give resume what should i do? or i will give XSleep to some high value and break the XSleep Execution when i resume.

So now How to break Xsleep execution?

If i am Wrong please correct me.

chaiein 16-Mar-12 6:29am View

ProcessChar() has the ReadFileTxt() which gives me warning!!

ReadFileTxt every time called will open the file when i give pause it exits with out closing and when i click pause again and goes to else loop(placed resume code)when ever file opens it starts from first character. First of all it tries to open gives a warning because its already open.

And what does DELAY_TIME contain?

chaiein 16-Mar-12 5:05am View

I am reading each character from text file and displaying the letters when i click on button it should stop there and when again when i click that button it should continue from where it paused.

chaiein 16-Mar-12 5:00am View

thank you all :)

chaiein 16-Mar-12 4:57am View

oh great thanks i got it :)

chaiein 16-Mar-12 4:40am View

But when i click on a button it should direct me to website. how will Syslink help me in this?

chaiein 16-Mar-12 4:39am View

ya i tried as below
void CDemoDlg::OnNMClickSyslink1(NMHDR *pNMHDR, LRESULT *pResult)
{

ShellExecute(NULL,NULL,"www.google.co.in",NULL,NULL,SW_SHOWNORMAL);

*pResult = 0;
}

but it does not show the dialog only

chaiein 16-Mar-12 4:13am View

I need to know the exact procedure of this or link.

chaiein 16-Mar-12 3:24am View

can please give me more information on this procedure?.

chaiein 16-Mar-12 3:23am View

using hyperlink means should i use sysLink?

chaiein 15-Mar-12 23:55pm View

for file type of CStdioFile to find the position where it stops getPositon() is used but the seek fails during execution. the getPosition is giving a wrong value.

chaiein 14-Mar-12 7:40am View

no i meant different any ways I got solved my problem :)by using some variables but without necessary to changing colour in static text.

Thanks for guiding:)

chaiein 14-Mar-12 7:38am View

thanks for the reply I solved my problem using above solution :)

chaiein 14-Mar-12 7:35am View

Deleted

somebody answer!!!!

chaiein 14-Mar-12 4:25am View

I got solved this problem i had to set the stopsong properly.Thank you :)

chaiein 13-Mar-12 6:59am View

I have updated so how can i change the code to pause the file reading txt or stop untill i do Onclick event.

readFile.Close(); is actually happening and immediately continues to play

chaiein 13-Mar-12 6:02am View

void CDemoDlg::OnLButtonDown(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default

CRect myRect;
GetWindowRect( &myRect);
//save current cursor coordinate
GetCursorPos(&point);
ScreenToClient(&point);
SendMessage(WM_NCLBUTTONDOWN, HTCAPTION, NULL);
//__super::OnLButtonDown(nFlags, point);
}

void CDemoDlg::OnMouseMove(UINT nFlags, CPoint point)
{
// TODO: Add your message handler code here and/or call default

CRect myRect;
GetWindowRect( &myRect);
CPoint curpoint;
GetCursorPos(&curpoint);
{
MoveWindow(curpoint.x - point.x, curpoint.y - point.y,
myRect.right - myRect.left, myRect.bottom - myRect.top, TRUE);
}
}

The above code allows me to move but when its moved more i am not able to see backgrounds What correction is needed for above

chaiein 13-Mar-12 3:30am View

"You can. Make the document read-only to prevent its modification."
i thought that you said to make this code project document read only so no one should change the question :)

chaiein 13-Mar-12 0:30am View

how to make it Read only?

chaiein 12-Mar-12 23:25pm View

it stops but resumes it .Actually stops but immediately resuming it. SO the stop is not recognizable.

chaiein 12-Mar-12 23:20pm View

This solved my problem in avoiding the warning message while opening same file again and agian.

i have stopsong=false then read.Close(); This still continues playing.

Second time when i click on the button it goes to else

chaiein 12-Mar-12 23:02pm View

ya sure thanks:)

chaiein 12-Mar-12 8:03am View

when i give this i am not able to read only its not entering the loop

chaiein 12-Mar-12 7:44am View

void CDemoDlg::OnBnClickedSongPlay()
{
if(stopSong==true)
{

readFile.Close();

stopSong=false;
return;
}
else
{

OnLbnSelchangeListSongs();

stopSong=true;
}
return;
}

After close the Readfile is still continues what is the problem in the code above?

chaiein 12-Mar-12 7:22am View

if (readFile.Open(strFilePath, CFile::modeRead, &fileException))
{
while (readFile.ReadString(strLine))
{
}

I have opened the file and able to read string but i want to stop, in between when i click on a button and resume or restart.

chaiein 9-Mar-12 2:25am View

no property to change color.I will use the CRichEditCtrl for more use.
Thank you :)

chaiein 9-Mar-12 1:33am View

ok I understand. How to change the complete text color in static text control suppose only when i click a button.

chaiein 9-Mar-12 1:00am View

can't i use static text control instead for color ?

chaiein 9-Mar-12 0:58am View

can't we use static text instead of CRichEditCtrl control ?

chaiein 8-Mar-12 23:45pm View

Delete works:) Thanks again:) Now I want to change the color of recently entered character say 6 then when 7 comes 6 comes to normal color and 7 should change the color.

chaiein 8-Mar-12 22:02pm View

econd time when i try to open the same file i should close the file and read again from first.How to do ??

chaiein 8-Mar-12 4:14am View

Is there any other way to read a file similar to above without causing problem when i try to open file

chaiein 8-Mar-12 4:05am View

ya.second time when i try to open the same file i should close the file and read again from first.

chaiein 8-Mar-12 3:54am View

But i try to open already opened file exactly near the open statement i am getting Assertion Failure warning. How to solve this problem?

chaiein 8-Mar-12 3:35am View

Thanks for the reply:)
I had to access the data to compare. I got the solution as below
std::string t="1O";
if(NotesStr.compare(1,t.length(),t))

chaiein 8-Mar-12 3:35am View

Thanks for the reply:)
I had to access the data to compare. I got the solution as below
std::string t="1O";
if(NotesStr.compare(1,t.length(),t))

chaiein 7-Mar-12 6:09am View

The above code works

chaiein 7-Mar-12 6:09am View

std::string t="1F";
if(NotesStr.compare(1,t.length(),t))
{
MessageBox("Hi");
}

chaiein 7-Mar-12 6:09am View

no even that cause error but different error

chaiein 7-Mar-12 6:04am View

1O is not ten its one and 'O' Alphabet

chaiein 7-Mar-12 3:21am View

Thank you so much I got great :)

chaiein 7-Mar-12 3:17am View

I have WM_CTLCOLOR but cannot see WM_CTLCOLORBTN in messages list

chaiein 7-Mar-12 2:26am View

CButtonStyle class i got from http://www.codeproject.com/Articles/5481/An-easy-way-to-create-transparent-button?msg=4182843#xx4182843xx using setTransparent

chaiein 7-Mar-12 2:24am View

I need a transparent to show the background picture.
I have picture in picture control which has the picture of some colorful letters and pictures.
when i place the transparent button above this picture it appears as though the picture is having that letters.

I have used CButtonStyle class but its only for one picture. but i want to know how to make the button to be always transparent what ever the background picture may be.

chaiein 7-Mar-12 1:12am View

Thank you :) now i am able to view the browser and with website

chaiein 1-Mar-12 23:18pm View

notes logic what is it please explain. for example?

chaiein 28-Feb-12 6:02am View

Thanks anyways for the reply :)

chaiein 28-Feb-12 6:02am View

i just commented the abov line now problem solved :)

chaiein 28-Feb-12 5:59am View

Break comes at this line
pApp = new Application(ApplicationId(0x4C21121B,0x046D4B71,0x880FA075,0x3DEC16D2));

chaiein 28-Feb-12 5:54am View

This bug got solved by making code generation to Multi-threaded Debug DLL (/MDd).
but again i am getting Break when i run the project
Microsoft Visual Studio C Runtime Library has detected a fatal error in GuitarTuner.exe.

Press Break to debug the program or Continue to terminate the program.

chaiein 28-Feb-12 5:46am View

adpcore.lib psapi.lib shlwapi.lib adpcppf.lib User32.lib version.lib winmm.lib including in linker input solved one error but again i got these errors

Error 17 error LNK2001: unresolved external symbol __imp___CrtDbgReportW OpenTunerCore.obj GuitarTuner
Error 18 error LNK2019: unresolved external symbol __imp___CrtDbgReportW referenced in function "protected: void __thiscall CSplashScreen::DisplayProductName(struct HDC__ *,int,int)" (?DisplayProductName@CSplashScreen@@IAEXPAUHDC__@@HH@Z) SplashScreen.obj GuitarTuner
Error 19 error LNK2001: unresolved external symbol __imp___CrtDbgReportW StdAfx.obj GuitarTuner
Error 20 error LNK2001: unresolved external symbol __imp___CrtDbgReportW BscBblDlg.obj GuitarTuner
Error 21 error LNK2001: unresolved external symbol __imp___CrtDbgReportW cBscFileVersion.obj GuitarTuner
Error 22 fatal error LNK1120: 1 unresolved externals Debug/GuitarTuner.exe GuitarTuner

chaiein 28-Feb-12 5:00am View

where should this be included? even i have this problem.

chaiein 25-Feb-12 7:08am View

I solved the bug by just removing the customised scrollbar which was causing the problem.

Thank you:)

chaiein 25-Feb-12 6:55am View

I have a bug in my program.
which does delete String in the listbox. when i do addString it appears messed up where the deleted String as not removed from the display and new string is appear above that deleted strings display.

So to overcome this bug I think if i replace the string with string="" then when i delete and add it does not appear as messed up.

So is there any command to Replace the Text in ListBox.

chaiein 25-Feb-12 6:16am View

OpenFile(strFileName); //here error as does not take one argument

when i gave OpenFile(songPath,OFS_MAXPATHNAME,OF_READWRITE); also 2nd argument error
http://msdn.microsoft.com/en-us/library/windows/desktop/aa365430(v=vs.85).aspx

Instead to play .Wav file i have a solution that is

PlaySound(filename.wav,NULL, SND_FILENAME|SND_ASYNC);

chaiein 24-Feb-12 6:30am View

when i click on the list of items i should be able to open that file how to do?

chaiein 24-Feb-12 6:29am View

I got the list of files path in the listbox using the following link
http://www.hassan-ahmad.com/2011/03/c-list-all-the-files-in-directory-recursively/

chaiein 24-Feb-12 6:03am View

ya this is working for me.Thanks:)

chaiein 24-Feb-12 5:36am View

Its not working
DlgDirList("C:\",IDC_LIST_SONGS,0,DDL_READWRITE);

It gives a break as access voilation

chaiein 23-Feb-12 4:21am View

Thank you but i need to display the contents in listBox.

chaiein 23-Feb-12 2:35am View

CString str1;
int Patch = m_grp_Inst.GetCurSel();
m_grp_Inst.GetText(Patch,str1);

if(str1=="fruits")
{
//What is the code???
}

chaiein 23-Feb-12 2:10am View

how to get the selected item string in vc++9.0

chaiein 22-Feb-12 6:06am View

Thank you for the information.

chaiein 22-Feb-12 5:41am View

It changes the size, position, and Z-order of child, pop-up, and top-level windows. but I need even the tools inside the window to change the size and position.

chaiein 16-Feb-12 5:28am View

all these are created dynamically. i cant use it with already created dialog. i f I have to change it to dynamically creating how can I include the tools inside.

chaiein 16-Feb-12 5:24am View

Thank you :) I will try some of these.

chaiein 16-Feb-12 4:47am View

i want to know what to include in movewindow()

chaiein 16-Feb-12 4:45am View

first step is fine but next steps i am not getting

chaiein 15-Feb-12 23:23pm View

I want both applications displayed on the same window means suppose i have a game developed and i have another application say something like virtual piano so is it possible to make a game and piano appear on the same window.example picture control where we can have a picture. is there a control where we can have another application.

chaiein 15-Feb-12 7:06am View

any links that have implemented this method in c++.

chaiein 15-Feb-12 7:05am View

thats a good example:) but i need example in code for better understanding.

chaiein 15-Feb-12 0:09am View

i did not understand.

chaiein 14-Feb-12 2:18am View

if(record==true)
{
recordNo++;
m_KeysRecord.push_back(m_CurrKey);
m_KeysChar.push_back(m_LowNote+m_CurrKey);
GetSystemTime(&m_KeysStartTime);
}

The above code is stores the key which is high lighted.
The below function is called after the recording complete and playing the recorded data.
void CPianoCtrl::Display_RecordNote()
{
CRect InvalidRect;
for(int recording=0;recording<=recordNo;recording++)
{
XSleep(Elapsed[recording]);

m_Keys[m_KeysRecord[recording]]->NoteOn(m_NoteOnColor, InvalidRect);

InvalidateRect(&InvalidRect);

findchords(m_KeysChar[recording]);
//InvalidateRect(&InvalidRect);

}
}
when i use record of keydown and which ever keydown when i play it plays one by one.i want to play the way i pressed the key that is when one keydown and keyup is pressed other key may be still keydown that is how may be the user have pressed the key while recording.

chaiein 10-Feb-12 1:47am View

Ya thank you:)

chaiein 10-Feb-12 1:32am View

WM_KEYDOWN is called when any key in the keyboard is pressed. how to find which key is pressed?

chaiein 10-Feb-12 1:20am View

using the link you i have posted i can check whether that key is pressed or not. Instead can you tell me how can we get to know directly without checking true or false just something like getKeyNo()...Is there any Standard function?

chaiein 10-Feb-12 1:15am View

thanks for the link :)

chaiein 10-Feb-12 1:13am View

keystroke is received by view that i have created a piano where each key of piano corresponds to a keys in keyboard.

chaiein 9-Feb-12 23:51pm View

So please tell me how to check whether that particular key is pressed.
if i press the same key more than once also all elapsed times should be stored vector array.

chaiein 9-Feb-12 23:49pm View

So please tell me how to check whether that particular key is pressed.
if i press the same key more than once also all elapsed times should be stored vector array.

chaiein 9-Feb-12 23:30pm View

How to check whether the keydown is done on say key of alphabet 'a' or anyother character or number.

chaiein 9-Feb-12 23:19pm View

if multithreading is not used then can we get desired output using keynumber as the index of some array which is equal to size of the number of keys in keyboard?

chaiein 9-Feb-12 23:18pm View

difficulty now is how to implement it using multithreading concept.

chaiein 9-Feb-12 23:16pm View

How to use this in multi threading?

chaiein 9-Feb-12 6:01am View

when do u call AddSound(...)
please can u explain?

chaiein 9-Feb-12 4:14am View

ya i can use file. but i want to know whether its possible to use array or variable if yes how and what type?

chaiein 1-Feb-12 7:41am View

@SAKryukov The link is directing to something else.
please send me the link where you saw those files.I need to create 3D Zombie character in directx.

chaiein 1-Feb-12 5:44am View

Hi Thank you :)

chaiein 31-Jan-12 23:27pm View

any free game development engines??

chaiein 31-Jan-12 2:24am View

hello please any body give me sample source code on shooter game to learn.

chaiein 31-Jan-12 1:29am View

I have googled a lot but i am not getting proper code for shooter game:( I got good tutorials for 2d than 3d in dark gdk

chaiein 21-Jan-12 7:09am View

Lakamrajubut for DWORD startTime, EndTime, and ElapsedTime how to push.
Records(DWORD time) : startTime(time)
{

}
Records(DWORD time) : endTime(time)
{

}
Records(DWORD time) : elapsed(time)
{

}

is it correct?
when i give this to which variable it is given?
NoteArray.push_back(GetCurrentTime());

chaiein 21-Jan-12 6:59am View

but for DWORD startTime, EndTime, and ElapsedTime how to push.
Records(DWORD time) : startTime(time)
{

}
Records(DWORD time) : endTime(time)
{

}
Records(DWORD time) : elapsed(time)
{

}

is it correct?
when i give this to which variable it is given?
NoteArray.push_back(GetCurrentTime());

chaiein 21-Jan-12 6:52am View

wow thanks That works Thank you so much :)

chaiein 21-Jan-12 6:45am View

should we write another for DWORD type also??

chaiein 21-Jan-12 6:44am View

Sorry i did not understand:(

chaiein 21-Jan-12 6:36am View

ya i want to push KeyNo now.

chaiein 21-Jan-12 6:33am View

How to hold the record objects when ever i need?

chaiein 21-Jan-12 6:33am View

I want to hold record objects.

chaiein 21-Jan-12 6:28am View

I am getting the crash window

chaiein 21-Jan-12 6:27am View

when i give NoteArray.push_back(m_Keys.KeyNo);
I am getting the below error

1>d:\mi\demodlg.cpp(112) : error C2664: 'std::vector<_Ty>::push_back' : cannot convert parameter 1 from 'int' to 'const CDemoDlg::Records &'
1> with
1> [
1> _Ty=CDemoDlg::Records
1> ]
1> Reason: cannot convert from 'int' to 'const CDemoDlg::Records'
1> No constructor could take the source type, or constructor overload resolution was ambiguous

chaiein 21-Jan-12 6:20am View

struct Records
{
//DWORD message;

int KeyNo;
DWORD startTime;
DWORD endTime;
DWORD elapsed;
};
std::vector<records> NoteArray;

I want to give KeyNo of first array index.How to do?
NoteArray.push_back(....);

chaiein 21-Jan-12 6:16am View

Richard i have improved the question Please check out

chaiein 21-Jan-12 6:12am View

I have not yet pushed any elements. i am trying to add the elements. how to add the elements please let me know.

chaiein 21-Jan-12 5:41am View

void CDemoDlg::OnNoteOn(CPianoCtrl &PianoCtrl, unsigned char NoteId)
{
midi::CShortMsg ShortMsg(midi::NOTE_ON, 0, NoteId, 127, 0);
ShortMsg.SendMsg(m_OutDevice);

}

chaiein 21-Jan-12 5:39am View

what type of variable should i declare for storing the message that is in below code.

midi::CShortMsg ShortMsg(midi::NOTE_ON, 0, NoteId, 127, 0);
ShortMsg.SendMsg(m_OutDevice);

I am getting errors if i create a variable of type midi::CShortMsg;

chaiein 21-Jan-12 5:24am View

I can store that message so that i can get the same sound again.
If i am wrong please correct me.

chaiein 21-Jan-12 4:53am View

Deleted

error C2039: 'CShortMsg' : is not a member of 'midi'
error C4430: missing type specifier - int assumed. Note: C++ does not support default-int

Comments by chaiein (Top 200 by date)