Click here to Skip to main content
15,860,861 members
Articles / Programming Languages / XML

Simple FTP Demo Application using C#.NET 2.0

Rate me:
Please Sign up or sign in to vote.
4.84/5 (83 votes)
17 Jan 20077 min read 764.9K   41.7K   235   113
An article to demonstrate common FTP functionalities using C#.NET 2.0.

Sample Image - maximum width is 600 pixels

Introduction

An addition to the Microsoft .NET framework 2.0 to 1.x is the support for FTP. All these days, we had to rely on 3rd party libraries which pretty well suited most of our needs, but for sure, there is an extra pleasure using the .NET Framework library classes. The code included is not designed to be a full fledged reusable library, but rather an easy to use and reusable pieces of code which is easily comprehensible and can be reused and tweaked to fit your specific needs. Therefore, the code for each functionality (upload, download, delete, etc.) can be easily picked up separately and reused. The main motive behind this article was the unavailability of .NET 2.0 FTP sample codes and their usage in C#; may be because it's a new entrant to the .NET scenario, or the third party implementations available were working pretty well, that this area of the .NET 2.0 library haven't got enough focus.

Background

I started working on this FTP module as part of my official work, but the requirement soon changed and I had to do it for .NET 1.1. So, I haven't travelled deeper into the rabbit hole. But I believe this gives a good, instant start for using the FTP support in .NET 2.0.

Using the Code

Don't forget to add the following directive:

C#
using System.Net;
using System.IO;

The following steps can be considered as a generic procedure of getting an FTP request executed using FtpWebRequest object:

  1. Create an FtpWebRequest object over an FTP server URI
  2. Set the FTP method to execute (upload, download, etc.)
  3. Set options (SSL support, transfer as binary/not, etc.) for the FTP webrequest
  4. Set the login credentials (username, password)
  5. Execute the request
  6. Receive the response stream (if required)
  7. Close the FTP Request, in addition to any open streams

One point to watch out while coding for any FTP application is to have the settings for the FTP request proper to suit the FTP server and its specific configurations. FtpWebRequest object exposes many properties to have these settings in place.

The sample for the upload functionality is as follows:

First, a URI is created which represents the FTP address along with the filename (directory structure included). This URI is used to create the FtpWebRequest instance.

Then, properties of the FtpWebRequest object are set, which determines the settings for the FTP request. Some of its important properties are:

  • Credentials - specifies the username and password to login to the FTP server.
  • KeepAlive - specifies if the control connection should be closed or not after the request is completed. By default, it is set to true.
  • UseBinary - denotes the datatype for file transfers. The 2 modes of file transfer in this case are Binary and ASCII. At bit level, both vary in the 8th bit of a byte. ASCII uses 8th bit as insignificant bit for error control, whereas, for binary, all the 8 bits are significant. So take care when you go for the ASCII transmission. To be simple, all those files that open and read well in Notepad are safe as ASCII. Executables, formatted docs, etc. should be sent using binary mode. BTW, sending ASCII files as binary works fine most of the time.
  • UsePassive - specifies to use either active or passive mode. Earlier, active FTP worked fine with all clients, but now a days, as most of the random ports will be blocked by firewall, the active mode may fail. The passive FTP is helpful in this case. But still, it causes issues at the server. The higher ports requested by client on server may also be blocked by firewall. But since FTP servers will need to make their servers accessible to the greatest number of clients, they will almost certainly need to support passive FTP. The reason why passive mode is considered safe is that, it ensures all data flow initiation comes from inside(client) the network rather than from the outside(server).
  • Contentlength - setting this property is useful for the server we request to but is not of much use for us(client), because FtpWebRequest usually ignores this property value, so it will not be available for our use in most of the cases. But if we set this property, the FTP server will get an idea in advance about the size of the file it should expect (in case of upload)
  • Method - denotes what action (command) to take in the current request (upload, download, filelist, etc.) It is set a value defined in the WebRequestMethods.Ftp structure.
C#
private void Upload(string filename)
{
  FileInfo fileInf = new FileInfo(filename);
  string uri = "ftp://" + ftpServerIP + "/" + fileInf.Name;
  FtpWebRequest reqFTP;
    
  // Create FtpWebRequest object from the Uri provided
  reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri(
            "ftp://" + ftpServerIP + "/" + fileInf.Name));

  // Provide the WebPermission Credentials
  reqFTP.Credentials = new NetworkCredential(ftpUserID, 
                                             ftpPassword);
    
  // By default KeepAlive is true, where the control connection is 
  // not closed after a command is executed.
  reqFTP.KeepAlive = false;

  // Specify the command to be executed.
  reqFTP.Method = WebRequestMethods.Ftp.UploadFile;
    
  // Specify the data transfer type.
  reqFTP.UseBinary = true;

  // Notify the server about the size of the uploaded file
  reqFTP.ContentLength = fileInf.Length;

  // The buffer size is set to 2kb
  int buffLength = 2048;
  byte[] buff = new byte[buffLength];
  int contentLen;
    
  // Opens a file stream (System.IO.FileStream) to read 
  the file to be uploaded
  FileStream fs = fileInf.OpenRead();
   
  try
  {
        // Stream to which the file to be upload is written
        Stream strm = reqFTP.GetRequestStream();
        
        // Read from the file stream 2kb at a time
        contentLen = fs.Read(buff, 0, buffLength);
        
        // Till Stream content ends
        while (contentLen != 0)
        {
            // Write Content from the file stream to the 
            // FTP Upload Stream
            strm.Write(buff, 0, contentLen);
            contentLen = fs.Read(buff, 0, buffLength);
        }
        
        // Close the file stream and the Request Stream
        strm.Close();
        fs.Close();
  }
  catch(Exception ex)
    {
        MessageBox.Show(ex.Message, "Upload Error");
    }
}

Above is a sample code for FTP Upload (PUT). The underlying sub command used is STOR. Here, an FtpWebRequest object is made for the specified file on the FTP server. Different properties are set for the request namely Credentials, KeepAlive, Method, UseBinary, ContentLength. The file in our local machine is opened and the contents are written to the FTP request stream. Here, a buffer of size 2KB is used as an appropriate size suited for upload of larger or smaller files.

C#
private void Download(string filePath, string fileName)
{
    FtpWebRequest reqFTP;
    try
    {
        //filePath = <<The full path where the 
        //file is to be created. the>>, 
        //fileName = <<Name of the file to be createdNeed not 
        //name on FTP server. name name()>>
        FileStream outputStream = new FileStream(filePath + 
                                "\\" + fileName, FileMode.Create);

        reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri("ftp://" + 
                                ftpServerIP + "/" + fileName));
        reqFTP.Method = WebRequestMethods.Ftp.DownloadFile;
        reqFTP.UseBinary = true;
        reqFTP.Credentials = new NetworkCredential(ftpUserID, 
                                                    ftpPassword);
        FtpWebResponse response = (FtpWebResponse)reqFTP.GetResponse();
        Stream ftpStream = response.GetResponseStream();
        long cl = response.ContentLength;
        int bufferSize = 2048;
        int readCount;
        byte[] buffer = new byte[bufferSize];

        readCount = ftpStream.Read(buffer, 0, bufferSize);
        while (readCount > 0)
        {
            outputStream.Write(buffer, 0, readCount);
            readCount = ftpStream.Read(buffer, 0, bufferSize);
        }

        ftpStream.Close();
        outputStream.Close();
        response.Close();
    }
    catch (Exception ex)
    {
        MessageBox.Show(ex.Message);
    }
}        

Above is a sample code for download of file from the FTP server. Unlike the Upload functionality described above, Download would require the response stream, which will contain the content of the file requested.
Here, the file to download is specified as part of the URI which in turn is used for the creation of the FtpWebRequest object. To 'GET' the file requested, get the response of the FtpWebRequest object using GetResponse() method. This new response object built provides the response stream which contain the file content as stream, which you can easily convert to a file stream to get the file in place.
Note: We have the flexibility to set the location and name of the file under which it is to be saved on our local machine.

C#
public string[] GetFileList()
{
    string[] downloadFiles;
    StringBuilder result = new StringBuilder();
    FtpWebRequest reqFTP;
    try
    {
        reqFTP = (FtpWebRequest)FtpWebRequest.Create(new Uri(
                  "ftp://" + ftpServerIP + "/"));
        reqFTP.UseBinary = true;
        reqFTP.Credentials = new NetworkCredential(ftpUserID, 
                                                   ftpPassword);
        reqFTP.Method = WebRequestMethods.Ftp.ListDirectory;
        WebResponse response = reqFTP.GetResponse();
        StreamReader reader = new StreamReader(response
                                        .GetResponseStream());
        
        string line = reader.ReadLine();
        while (line != null)
        {
            result.Append(line);
            result.Append("\n");
            line = reader.ReadLine();
        }
        // to remove the trailing '\n'
        result.Remove(result.ToString().LastIndexOf('\n'), 1);
        reader.Close();
        response.Close();
        return result.ToString().Split('\n');
    }
    catch (Exception ex)
    {
        System.Windows.Forms.MessageBox.Show(ex.Message);
        downloadFiles = null;
        return downloadFiles;
    }
} 

Above is a sample block of code for getting the file list on the FTP server. The URI is built specifying the FTP server address/name and the required path if any. In the above example, the root folder is specified for the creation of the FtpWebRequest object. Here, the response stream is used for the creation of a StreamReader object, which has the whole list of file names on the server separated by "\r\n" which is newline and carriagereturn together. You can get the whole file list ("\r\n" separated) using the ReadToEnd() method of the StreamReader object. The above implementation reads each file name and creates a StringBuilder object by appending each file name. The resultant StringBuilder object is split into a string array and returned. I am sure there are better ways to do it. A better way could be to remove the whole '\r' instances from the whole list (returned by <<StreamReader>>.ReadToEnd())) and split the resultant string using '\n' delimiter. Anyway, I didn't want to spend more of my energy and time pondering over it ;-).

The implementations for Rename, Delete, GetFileSize, FileListDetails, MakeDir are very similar to the above pieces of code and the attached code is easily comprehensible.

Note: For renaming, the new name can be assigned to the RenameTo property of FtpWebRequest object. For MakeDirectory, the name of the new directory can be specified as part of the URI used to create FtpWebRequest object.

Points of Interest

Please take NOTE of the following points while coding in this area:

  • Unless the EnableSsl property is true, all data and commands, including your user name and password information, are sent to the server in clear text. Anyone monitoring network traffic can view your credentials and use them to connect to the server. If you are connecting to an FTP server that requires credentials and supports Secure Sockets Layer (SSL), you should set EnableSsl to true.
  • If you do not have the proper WebPermission to access the FTP resource, a SecurityException exception is thrown.
  • Requests are sent to the server by calling the GetResponse method. When the requested operation completes, an FtpWebResponse object is returned. The FtpWebResponse object provides the status of the operation and any data downloaded from the server. That is,
    StatusCode property of FtpWebResponse object provides the latest status code returned by the FTP server.
    StatusDescription property of FtpWebResponse object provides the description of the status code returned.

License

This article has no explicit license attached to it, but may contain usage terms in the article text or the download files themselves. If in doubt, please contact the author via the discussion board below.

A list of licenses authors might use can be found here.


Written By
Web Developer
India India
Mohammed Habeeb works as a software developer for an IT company in Dubai. He holds a bachelors in Computer Science Engineering from MES College, Calicut University. He is also a Microsoft Certified Application Developer (MCAD) in .NET Framework. He has a strong inclination towards Microsoft technologies especially the .NET Platform. He has been an active member of Cochin and Bangalore Microsoft user groups.
He has a strong passion for science and technology. His interests span through travelling, driving, photography, stamps and coin collection.
You can find more about him @ http://www.habeebonline.com

Comments and Discussions

 
QuestionNice Job Pin
Member 1195098221-Apr-19 11:26
Member 1195098221-Apr-19 11:26 
Questionupload size Pin
enjoy_ist2-Oct-18 1:38
enjoy_ist2-Oct-18 1:38 
QuestionThe remote server returned an error: (530) Pin
sumantkumarnit7-Jun-17 21:17
sumantkumarnit7-Jun-17 21:17 
QuestionFTP application not working. Pin
Member 128340313-Jan-17 20:06
Member 128340313-Jan-17 20:06 
GeneralThank you Pin
Member 1114334822-Feb-16 0:19
Member 1114334822-Feb-16 0:19 
Generalvery useful Pin
Southmountain30-Oct-15 5:43
Southmountain30-Oct-15 5:43 
SuggestionVery nice Code Project with Code. Pin
Destiny77717-Feb-15 14:49
Destiny77717-Feb-15 14:49 
QuestionAmazingly helpful Pin
ehelin4-Feb-15 11:31
ehelin4-Feb-15 11:31 
QuestionIs it also applicable for SFTP URI? Pin
osaung8-Dec-14 18:47
osaung8-Dec-14 18:47 
AnswerDownload / Upload Binary Files on FTP Server Using C# Pin
Santhosh kumar6-Nov-14 20:02
professionalSanthosh kumar6-Nov-14 20:02 
GeneralWell written. Pin
sevenupkit30-Jun-14 22:34
sevenupkit30-Jun-14 22:34 
QuestionWhat change is needed to upload all files in a directory Pin
bwidlund12-Mar-14 4:46
bwidlund12-Mar-14 4:46 
Questionhelp! Pin
alteclansing11-Dec-13 12:24
alteclansing11-Dec-13 12:24 
QuestionReading File Properties Via FTP without downloading it. Pin
Umer Asif14-Nov-13 4:59
Umer Asif14-Nov-13 4:59 
QuestionAwesome Pin
LokeshThakur11-Apr-13 5:18
LokeshThakur11-Apr-13 5:18 
QuestionThank You man Pin
daghune12-Mar-13 23:08
daghune12-Mar-13 23:08 
GeneralGood article Pin
Rasadul Alam10-Mar-13 19:55
Rasadul Alam10-Mar-13 19:55 
QuestionSomething wrong with file downloading PinPopular
xcf0075-Nov-12 14:53
xcf0075-Nov-12 14:53 
Questiontest Pin
Bala_8414-Sep-12 1:06
Bala_8414-Sep-12 1:06 
GeneralMy vote of 5 Pin
Chandrashekar SK10-Sep-12 20:57
Chandrashekar SK10-Sep-12 20:57 
GeneralMy vote of 5 Pin
Cyril Barnier30-Aug-12 23:28
Cyril Barnier30-Aug-12 23:28 
GeneralMy vote of 5 Pin
Vijay234520-Jul-12 9:49
Vijay234520-Jul-12 9:49 
GeneralMy vote of 5 Pin
AJMAL SHAHZAD22-Jun-12 0:10
AJMAL SHAHZAD22-Jun-12 0:10 
Questionsecure ftp? Pin
cmb333319-May-12 5:28
cmb333319-May-12 5:28 
GeneralMy vote of 5 Pin
Avi Farah1-Apr-12 14:09
Avi Farah1-Apr-12 14:09 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Praise Praise    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.