Click here to Skip to main content
Click here to Skip to main content

Tagged as

Go to top

Windows Mobile: Install FTDI_SER serial to USB adapter

, 4 Jan 2010
Rate this:
Please Sign up or sign in to vote.
Sometimes you may need additional serial connectors for your Windows Mobile device. Here is the odyssey I had with an FTDI adapter...

Sometime you may need additional serial connectors for your windows mobile device. Here is the odyssey I had with a FTDI adapter:

How I installed a FTDI serial to USB adapter within ITC CN50 running Windows Mobile 6.1.

Although the USB to Serial adapters with FTDI chips can be installed with drivers from FTDI, these will not work out of the box with WM6.1.

Initial Test with CN50

First I copied the Armv4 driver files ftdi_ser.dll and FTDIPORT.INF to \Windows on the device.

Inserted a Micro USB/B to USB A host connector (Digikey H11576-ND)

micro-usb-adapter

Inserted the USB2SER adapter “US232R-10 – Premium USB – RS232 Serial Converter Cable

US232R-10

The device prompts for the driver name and I typed “ftdi_ser.dll” although it should not do so, as I copied the files previously. See also

Then I started to try to communicate using COM10 (verified with registry). But there was no communication possible. The VCP test application did not list any port to open, so I entered COM10: (or SER0 for patched driver) but without success.

I also tested without success using a Loopback adapter as described here:

loopback-rs232

Using the VCP PC drivers for WinXP the serial adapter worked fine, so the hardware is not faulty.

I also tested on CN3 (WM6.1) at the dock connector without the micro-USB cable. But this did also not work.

Finally, I tested on a WinCE5 device (CK61) and this worked OK. So I compared the registry of WinCE5 and WM6.1 after driver install and adapter connection. I found the following (red) keys are missing on the WM6.1 device and so I added them manually:

REGEDIT4

;[HKEY_LOCAL_MACHINE\Drivers\Active\48]
;"FullName"="SER0"
;"Hnd"=dword:005A1A80
;"Key"="Drivers\\USB\\ClientDrivers\\FTDI_DEVICE"
;"Name"="SER0:"

[HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\FTDI_DEVICE\FTE06D03]
"ConfigData"=hex(3):01,04,3f,3f,10,27,88,13,c4,09,e2,04,71,
	02,38,41,9c,80,4e,c0,34,00,1a,00,0d,00,06,40,03,80,00,00,d0,80
"DeviceContext"=dword:00000000
"InitialIndex"=dword:00000000
"LatencyTimer"=dword:00000010

[HKEY_LOCAL_MACHINE\Drivers\USB\ClientDrivers\FTDI_DEVICE]
"ConfigData"=hex(3):01,04,3f,3f,10,27,88,13,c4,09,e2,04,71,02,38,41,9c,80,
	4e,c0,34,00,1a,00,0d,00,06,40,03,80,00,00,d0,80
"DeviceArrayIndex"=dword:00000000
"Dll"="ftdi_ser.dll"
"Index"=dword:00000000
"InitialIndex"=dword:00000000
"LatencyTimer"=dword:00000010
"Prefix"="SER"
"Version"="1.1.0.2"

[HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\1027_24577\Default\Default\FTDI_DEVICE]
"DLL"="ftdi_ser.dll"

[HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\1027_24592\Default\Default\FTDI_DEVICE]
"DLL"="ftdi_ser.dll"

[HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\1027_24593\Default\Default\FTDI_DEVICE]
"DLL"="ftdi_ser.dll"

[HKEY_LOCAL_MACHINE\Drivers\USB\LoadClients\Default\Default\255\FTDI_DEVICE]
"DLL"="ftdi_ser.dll"

Using these registry changes and after reinserting the adapter, I was able to communicate using the patched driver, where all COM was replaced with SER. Maybe the original driver will work too, it uses COM10 as port, where the patched driver uses SER0.

VCP Test Tool

Although the VCP Test application is not the best in regards of error checking (you can enter whatever you want for port and it always makes you think it was able to open the port), I include it here only for completeness.

Original VCP test tool: http://www.ftdichip.com/Projects/CodeExamples/VC++/VCPTest_vcpp.zip

Patched Driver: DOWNLOAD: FTDI (CE ARM) patched driver - Replaced all COM by SER

Here is the source code of the modded VCP test tool: DOWNLOAD: Modded VCP test tool -

Additional Links

Link to Installation guides: http://www.ftdichip.com/Documents/InstallGuides.htm

The CE installation guide: http://www.ftdichip.com/Documents/InstallGuides/Windows_CE_Installation_Guide.pdf

<!-- Social Bookmarks BEGIN --> <!-- Social Bookmarks END -->

License

This article, along with any associated source code and files, is licensed under The Code Project Open License (CPOL)

Share

About the Author

hjgode

Germany Germany
No Biography provided

Comments and Discussions

 
Suggestionwindows Mobile 6.1/6.5 FTDI driver loading PinmemberMadManMarkAu17-Jan-12 13:21 

General General    News News    Suggestion Suggestion    Question Question    Bug Bug    Answer Answer    Joke Joke    Rant Rant    Admin Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.

| Advertise | Privacy | Mobile
Web03 | 2.8.140916.1 | Last Updated 4 Jan 2010
Article Copyright 2010 by hjgode
Everything else Copyright © CodeProject, 1999-2014
Terms of Service
Layout: fixed | fluid