|
I can send data files to a CD-ROM drive by right-clicking the file(s) and selecting CD Drive from the Send To menu. How can I do the same thing with the DVD-ROM drive? Does the OS come with something by default that will allow me to save files to a DVD-ROM drive. If not, any recommendations on a shareware solution?
Thanks,
DC
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"We will be known forever by the tracks we leave." - Native American Proverb
|
|
|
|
|
As far as I know, to burn the file to DVD you will need the software and DVD-RW. But I never see the SEND TO command to DVDROM. If you prefer to burn the file to DVD try to use NTI Software[^].
|
|
|
|
|
|
hi all,
i have an interesting question for u, i need to determine whether my machine supports 2 byte characters or 1 byte.
if i run my application it shud set the max limit allowed in a text box according to the locale set. like in English 1 byte and in Japanese 2 bytes. My code is written in VC++
Regards
|
|
|
|
|
and what is the question ?
if you ask for a C++ code question, ask it in the correct forum. 
|
|
|
|
|
|
Hi Friends,
I am developed a new personal web site. I want to host it in my LAN. I installed IIS 5.0. How can I host it in my lan.
Please help me
Thanks in advance
Jijo
JIJO BABY - Lets Play C#
|
|
|
|
|
I assume you have two NICs, or some other such arrangement that allows you to have one IP address for the Internet, and a separate one for the LAN. When you create a site in IIS you can assign it to a specific IP address on the host machine. Assign it to the LAN address, and it will not respond to HTTP queries on the WAN (Internet) side.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
|
Hi, What is the maximum number of users who can connect to an IIS Web
site installation on Win XP Pro?
|
|
|
|
|
That depends on what else the machine is doing, and how many people are already logged into the machine. By default, in a perfect world, the limit is 10. Your machine setup and circumstances at any one time will dictate less. In my experience, that limit is more like 3-6. This is because each user can have multiple connections to the server, downloading various pieces of the same page at the same time.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Thank you very much for your explaination.
|
|
|
|
|
Hi, by default which of the following Web content zones prompt the user
to download an unsigned ActiveX control?
- Local intranet
- Internet
- Trusted Site
- Restricted Sites
|
|
|
|
|
You can find out yourself by going to Internet Explorer, Tools, Internet Options, Security tab, then click on the zone you want, then the "Custom Level" button at the bottom. The first options listed...
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Thank you very much for your explaination.
|
|
|
|
|
Hi, I have set Do not allow application to run in gpedit.msc except my application. Then I want to reset this setting but I can not run gpedit.msc anymore. Can anyone help me related to this problem as soon as posible?
Thank
|
|
|
|
|
If you can stil open a CMD prompt, you can launch it using START GPEDIT.MSC. If your talking about the "Run only allow Windows applications" policy, that stop Explorer from launching application, not the command prompt. You can also try the Task Manager's File menu, New Task (Run...) option to do the same.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Hi,
How can i get a MAC Table from 3com Switch by SNMP request?
i think that i can do that in atTable in mgmt >>mib-2
by testing this table i can't get any value from my switch
Why?
Thanks for all...
|
|
|
|
|
Try to read an article[^] cisco product. It might give you some idea relate to your 3com product. On the other hand, i suggest you to read the product documentation for more detail.
|
|
|
|
|
I am wanting to set up a domain controler for a small network (9 machines).
What info I have is lacking and am looking for some guidance references. I think I know the concepts, but have never actually set any domains up. The controler seams to be correct from what I can tell from it's control panels, but no other machines recognise the domain, when I try to switch from work group to domain. I do not mind reading and spending some time at this. But preferably a few days and not months. 
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
-- modified at 19:46 Friday 21st April, 2006
|
|
|
|
|
If no other machines recognise the domain, it's probably because they aren't able to resolve the DNS name. You need to make all your machines' primary and only DNS server be the domain controller, assuming that your domain controller is the domain's DNS server. The DC's own primary DNS server in its network connection properties should be itself. Again, the secondary DNS server field should be blank, unless you actually do have a secondary DNS server with the same contents.
Make sure that your domain controller has a static IP address so that you can enter this as the DNS server address on the clients, or in your DHCP server software if you're using DHCP.
To ensure that your other computers can still resolve DNS names outside your domain, you need to tell the DNS server software where to forward requests to. In the DNS snap-in, go to the server properties, the Forwarders tab. Enter your ISP's DNS servers here.
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Thank you, Mike.
I think I have done everything you mention in the first two paragraphs. I have to relook at the forwarders tab. But I would think that would just not let the see the outside world.
I know I need to read a little more. Obviously I am missing something. Just not sure what to read.
Do you know what impact I have if my domain does exist outside in the real world? I added home. to the front of it. i.e. home.barnhart.com.
Thanks again, I appreciate the response. Lets me know I not totally off.
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
|
|
|
|
|
For the record, I found an incorrect entry in the WINS settings that was the above problem. So progress but all is not well.
When I try (and I am only working with on client test box at this time.) I fail to "find the network path" when I try to join. I do get a login request for username/password. After making an entry I get the error message a 1/2 minute later. To note the same error occures no matter what I give for the username and password. I have tried the admin account and my account with and with out the @domain for the usernames (in addition to one garbage entry.)
Now:
From the MS Knowledgebase: SYMPTOMS You are unable to add your Windows 2000 Professional or Windows 2000 Server computer to an Active Directory domain. When you specify the domain to join, you receive the following error message:
The following error occurred when attempting to join "domain name". The network path was not found
CAUSE This behavior can occur if you are using an incorrect Internet Protocol (IP) address for the Domain Name Service (DNS) server.
RESOLUTION To resolve this behavior, use the correct DNS server IP address and then join the domain.
MORE INFORMATION Click Start, point to Settings, point to Network and Dialup Connections, and then click Local Area Connection.
Click Properties.
Click Internet Protocol (TCP/IP), and then click Properties.
Click Advanced, and then click DNS.
Select the incorrect DNS IP address, and click Edit.
Type the correct IP address for the DNS server, and then click OK.
Click OK on the open dialog boxes to close them, and then click Close.
I have been through all of these settings several times and see nothing wrong. To test I did ping the domain controler with both the ip address and the domain name. Full response with both option. That tells me the DNS setup is correct, RIGHT?
I ask is there any other tests I can make from a "client" box to test the dns setup?
Am I missing the correct format of the username to login?
Thanks for reading.
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
|
|
|
|
|
Get out the CD for the server and install the Support Tools. Then run dcdiag to test the domain controller (assuming that the server is the DC). Also run netdiag from the same toolset. These run some tests against the machine to determine whether the network settings are correct and if the DC is functioning. It's a good start, anyway, and usually yields some good clues about where to search next.
"...a photo album is like Life, but flat and stuck to pages." - Shog9
|
|
|
|
|
Roger Wright wrote: usually yields some good clues about where to search next.
Yes, First I clearly do not understand the relationship between the dhcp service and the dns service.
For my testing enviroment my dsl router does provide dhcp capability. I turned off the dhcp on the server and back to where I started (could not fine the domain controler).
Ok turn it back on and configure the DHCP service. Ok, back to can not join due to "find the network path" again.
Running the dcdiag does give me some message but it is trimmed off.
" Event String: The DHCP/BINL service has determined that it is"
Do I have to have the DHCP server running on the same box? I would think not.
In either case is it best to turn off dhcp on the dsl/cable routers when setting up a domain controler and using it's dhcp?
"Every new day begins with possibilities. It's up to us to fill it with things that move us toward progress and peace.” (Ronald Reagan)
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
