C / C++ / MFC Discussion Boards

Re: file system api hook/file system driver

Anthony_Yio15-Jul-03 0:49

15-Jul-03 0:49

There are some article in codeproject which might help you up.

Try this.
http://www.codeproject.com/file/directorychangewatcher.asp?target=file%7Cwatcher[^]

good luck.

Re: file system api hook/file system driver

Mike Nordell15-Jul-03 5:22

Mike Nordell

15-Jul-03 5:22

anshumanshinde wrote:
we have to write a vxd for win9x/me and filesystem driver for ntbased systems(emphasis added)

OK, that concludes it. You *are* stuck between a rock and a hard place. You will have to learn Win9x VxD programming. You will have to learn NT kernel mode programming. You will have to learn filesystem filter drivers, the subtle but often crashing (BSOD-style) difference in the driver model between e.g. NT4 and NT5, the addition of IRP_Xxxx "messages", the addition of ... if you are unlucky even the added power management in NT5+. Just to mention a few of the problems you are facing.

I wish you luck. This is an effort I'd myself feel as a refreshing challenge to undertake! Smile | :)

If I knew less than I do, I'd really recommend the (AFAIK) only commercial entity that *do* know these things and can provide both help and education: OSR. Please note I know close to nothing about that company and have no interests in it - it just happens to be the only entity I know about that actually *can* provide help in these areas.

Again: ++luck;

/Mike

rect on top of the Text

spicy_kid200014-Jul-03 17:35

spicy_kid2000

14-Jul-03 17:35

hi ,

am trying to Draw a rect on top of the text. It is not working . pls see the code

CFont font;
CSize sz;
CBrush gBrush = RGB(10,255,10);
CBrush bBrush = RGB(0,0,0);

CString str=_T("HELLO WORLD");

VERIFY(font.CreateFont(
25, // nHeight
0, // nWidth
0, // nEscapement
0, // nOrientation
FW_NORMAL, // nWeight
FALSE, // bItalic
FALSE, // bUnderline
0, // cStrikeOut
ANSI_CHARSET, // nCharSet
OUT_DEFAULT_PRECIS, // nOutPrecision
CLIP_DEFAULT_PRECIS, // nClipPrecision
DEFAULT_QUALITY, // nQuality
DEFAULT_PITCH | FF_SWISS, // nPitchAndFamily
"Arial Narrow")); // lpszFacename

pDC ->SelectObject(font);
pDC->SelectObject(bBrush);

pDC->TextOut(5, 5, str);

pDC->SelectObject(gBrush);

sz = pDC->GetTextExtent(str);
pDC->Rectangle(5,5,sz.cx+5,sz.cy+5);

Re: rect on top of the Text

Dave Bryant14-Jul-03 17:46

Dave Bryant

14-Jul-03 17:46

CDC::Rectangle() uses the current pen, not a brush. Create a new pen first, select it into the DC, and then try drawing it.

Dave
http://www.cloudsofheaven.org

not working

spicy_kid200014-Jul-03 17:54

spicy_kid2000

14-Jul-03 17:54

hi Thanks for the reply...I tried that way also, pls see the code, but not working.

Thanks very much

CFont font,font2;
CSize sz;
int x1=0,y1=0,x2=0,y2=0;
CString str=_T("HELLO WORLD");
VERIFY(font.CreateFont(
25, // nHeight
0, // nWidth
0, // nEscapement
0, // nOrientation
FW_NORMAL, // nWeight
FALSE, // bItalic
FALSE, // bUnderline
0, // cStrikeOut
ANSI_CHARSET, // nCharSet
OUT_DEFAULT_PRECIS, // nOutPrecision
CLIP_DEFAULT_PRECIS, // nClipPrecision
DEFAULT_QUALITY, // nQuality
DEFAULT_PITCH | FF_SWISS, // nPitchAndFamily
"Arial Narrow")); // lpszFacename

pDC ->SelectObject(font);

sz = pDC->GetTextExtent(str);

CPen myPen(PS_SOLID,1,RGB(10,255,10));

pDC->SelectObject(&myPen);

pDC->TextOut(5, 5, str);

pDC->Rectangle(5,5,sz.cx+5,sz.cy+5);

Re: not working

Dave Bryant14-Jul-03 18:02

Dave Bryant

14-Jul-03 18:02

1) What is the value of sz? Is it returning a valid size?

2) What is Rectangle() returning? It should return TRUE if successful.

Dave
http://www.cloudsofheaven.org

Re: rect on top of the Text

PJ Arends14-Jul-03 18:01

PJ Arends

14-Jul-03 18:01

actually, CDC::Rectangle() does use the current brush for filling the rectangle. It uses the current pen only to draw the rectangle's edges.

Sonork 100.11743 Chicken Little

"You're obviously a superstar." - Christian Graus about me - 12 Feb '03

Within you lies the power for good - Use it!

Re: rect on top of the Text

PJ Arends14-Jul-03 18:09

PJ Arends

14-Jul-03 18:09

I copied your code into my app, and it worked perfectly. It drew a green rectangle over the text.

Sonork 100.11743 Chicken Little

"You're obviously a superstar." - Christian Graus about me - 12 Feb '03

Within you lies the power for good - Use it!

Re: rect on top of the Text

spicy_kid200014-Jul-03 18:18

spicy_kid2000

14-Jul-03 18:18

fo me only a green rect is coming

but no text

rect and all giving me return value success

Re: rect on top of the Text

PJ Arends14-Jul-03 18:30

PJ Arends

14-Jul-03 18:30

That is because the rectangle is over the text;) (ie. The text is behind the rectangle) If you shift the rectangle over a little, you will see the text behind it.

Sonork 100.11743 Chicken Little

"You're obviously a superstar." - Christian Graus about me - 12 Feb '03

Within you lies the power for good - Use it!

Inline Assembler Macros?

Aidman14-Jul-03 16:37

Aidman

14-Jul-03 16:37

Hi, all

I am trying to write a high performance library by using inline assembler, but I have encountered a irritating problem. It seems that VC++ refuses to accept multi-instructions within the inline asm section for the macro. For example, I can write a inline assembler macro with the single instruction “mov eax, 0” but that’s it, VC++ refuses to accept anymore instructions. The following code might give a better understanding.

#define TestMacro1(x) _asm{ mov eax, 0 } // This works<br />
#define TestMacro2(x) _asm{ mov eax, 0; mov ebx, 0 } // This doesn’t

So what I am trying to do here is to add more then one instruction into the macro, but I don’t know how. Any ideas on how to solve this are highly appreciated.

Thanks in advance.
Aidman » over and out

Re: Inline Assembler Macros?

PJ Arends14-Jul-03 17:39

PJ Arends

14-Jul-03 17:39

just a guess, untested

#define testmacro(x) _asm mov eax, 0 _asm mov ebx, 0

http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vccore98/html/_langref___asm.asp[^]

Sonork 100.11743 Chicken Little

"You're obviously a superstar." - Christian Graus about me - 12 Feb '03

Within you lies the power for good - Use it!

Re: Inline Assembler Macros?

Aidman14-Jul-03 22:36

Aidman

14-Jul-03 22:36

Thank you

I am most grateful

Aidman » over and out

Re: Inline Assembler Macros?

Toni7814-Jul-03 19:22

Toni78

14-Jul-03 19:22

My untested guess would be

#define TestMacro2(x) _asm{ mov eax, 0 \
                            mov ebx, 0 }

// Afterall, I realized that even my comment lines have bugs

When one cannot invent, one must at least improve (in bed).-My latest fortune cookie

Re: Inline Assembler Macros?

Aidman14-Jul-03 22:56

Aidman

14-Jul-03 22:56

When I try to compile this:

#define TestMacro2(x) _asm{ mov eax, 0 \
                            mov ebx, 0 }

int main() {
	TestMacro2(0);
	return 0;
}

I get the following error and warning with VC++:

warning C4405: 'mov' : identifier is reserved word<br />
error C2400: inline assembler syntax error in 'second operand'; found 'register'

Thanks anyway Smile | :)

Aidman » over and out

Re: Inline Assembler Macros?

Toni7814-Jul-03 23:39

Toni78

14-Jul-03 23:39

I am sorry Aidman that it didn't work. It was just a suggestion that I didn't test, because I was in a hurry.

// Afterall, I realized that even my comment lines have bugs

When one cannot invent, one must at least improve (in bed).-My latest fortune cookie

Re: Inline Assembler Macros?

Ryan Binns14-Jul-03 23:18

Ryan Binns

14-Jul-03 23:18

Nope. Won't work. The '\' at the end of the line will cause the two lines to be concatenated, effectively becoming

#define TestMacro2(x) _asm{ mov eax, 0 mov ebx, 0 }

You'll have to use PJ's solution to get the result he's after.

Ryan

"Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"

Re: Inline Assembler Macros?

Toni7814-Jul-03 23:36

Toni78

14-Jul-03 23:36

It was a shot in the dark. In assembly there are no line delimiters such as ; (I am sure you know this), while PJ's solution seemed to work I thought he could give it a try with my idea. Obviously, it doesn't work. Big Grin | :-D

// Afterall, I realized that even my comment lines have bugs

When one cannot invent, one must at least improve (in bed).-My latest fortune cookie

Re: Inline Assembler Macros?

Ryan Binns15-Jul-03 0:48

Ryan Binns

15-Jul-03 0:48

The __asm is its own separator, so __asm mov ax,0 __asm mov bx,0 is perfectly valid code.

Ryan

"Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"

Re: Inline Assembler Macros?

TheSurrealist15-Jul-03 0:00

TheSurrealist

15-Jul-03 0:00

Hi,

Did you try:

#define TestMacro2(x) { _asm mov eax, 0 _asm mov ebx, 0 }

or even

#define TestMacro2(x) { \
_asm mov eax, 0 \
_asm mov ebx, 0 \
}

Both of the above should work - note the surrounding braces {} are not necessary but are there to make the code look prettier. Smile | :)

HTH

--------------------------------------------

"The mere act of drinking beer in an attempt to measure your tolerance is likely to affect your impression of how many beers you've drunk."

-- The Heineken uncertainty principle.

about using OpenDriver()

gdzfy14-Jul-03 16:27

gdzfy

14-Jul-03 16:27

see:
http://www.codeproject.com/script/comments/forums.asp?msg=550923&forumid=1647#xx550923xx

and

http://www.codeproject.com/script/comments/forums.asp?msg=549039&forumid=1647#xx549039xx
now my test result is :
the clean app works, but the clean DLL does not.

a good man

CPropertySheet Apply button disabled

haritadala14-Jul-03 13:55

haritadala

14-Jul-03 13:55

Hello all

I'm coding an application using CPropertySheet and adding some property pages to this property sheet. The problem the Apply button by default is disabled, is there any way to enable it for all the property pages contained in the property sheet.

If any one knows how to do it, pls help me.

thanks for your time.
Hari.

Re: CPropertySheet Apply button disabled

Andrew Walker14-Jul-03 15:03

Andrew Walker

14-Jul-03 15:03

From my copy of MSDN

CPropertyPage::SetModified() Call to activate or deactivate the Apply Now button.

If you can keep you head when all about you
Are losing theirs and blaming it on you;
If you can dream - and not make dreams your master;
If you can think - and not make thoughts you aim;
Yours is the Earth and everything that's in it.

Rudyard Kipling

Re: CPropertySheet Apply button disabled

haritadala15-Jul-03 2:30

haritadala

15-Jul-03 2:30

Hi Andrew

Thanks for the reply. Now the Apply button is activated whenever I change any of the Page properties.

Thanks for answering my question.

Hari.

Re: CPropertySheet Apply button disabled

Andrew Walker15-Jul-03 2:32

Andrew Walker

15-Jul-03 2:32

That's ok.

Smile | :)

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.