|
Do you have the sources of the dll ? If yes, you can simply open the project with VC6 and press F5 to start debugging it. It will ask you to select an executable to run which is using your dll. You can then select IE8 and when your dll will be loaded, you will be able to set breakpoints in it.
You have to make sure that the program is using the same version as the sources you are debugging.
|
|
|
|
|
Hello Friends
I am creating a win32 based window application.I created one modal Dialog
but at the same time while first modal dialog is open I want to open another second modal dialog so for that I created second modal dialog in showWindow of First Modal Dialog.
But It is not opening.
First of all ,I want to know that can we do it ?
Or is any other way to do it?
I want to know one more thing that How can I get the Handle of Modal Dialog?
Thanks In Advance.
Regards
Yogesh
|
|
|
|
|
What do you want to achieve exactly ? That you have the two modal dialogs but only the last opened can be used (so the last one is on top and doesn't allow the first one to be clicked) ? Or do you really want to be able to click on the two dialogs at the same time but not on the rest of your application ? I guess from your question that it is what you want to achieve. In that case, your second dialog has to be a modeless dialog (if you search in the articles of codeproject, you'll find plenty of articles discussing them).
|
|
|
|
|
You first need to understand "blocking", "modality" and the relationship between them.
I can only tell you that if you really need two modal dialogs to be displayed simultaneously (why would such a thing be needed completely escapes me), then you could spawn the dialogs from two different threads (one could be the main thread).
But seriously reconsider what you're doing. Perhaps there's something better that you can do.
“Follow your bliss.” – Joseph Campbell
|
|
|
|
|
Your design is wrong! A modal dialog is used to stop an application while the user enters some information, selects options etc, in order to control the work to be done. The whole idea of modal dialogs is to prevent the user doing anything until the requirements of the dialog have been met. If you need more than one dialog at the same time then the design of your application is seriously flawed.
|
|
|
|
|
I suggest you merge the two dialog boxes into one model dialog box, for example, in a side-by-side way. When you want to "dismiss" any one of the original dialog boxes, just hide the appropriate side (by using some resizing and/or moving tricks).
|
|
|
|
|
|
Did u googled?
[^]
Величие не Бога может быть недооценена.
|
|
|
|
|
Adam Roderick J 09 wrote: Did u googled?
It's amazing that none of them can use Google but they all seem to be able to find us here. 
You measure democracy by the freedom it gives its dissidents, not the freedom it gives its assimilated conformists.
|
|
|
|
|
Here[^] is a series of articles that covers the subject. BTW, a simple google search would have shown you already a lot of useful information.
|
|
|
|
|
Hi all,
i m working on SDI type application,in form view of application i want to load an image as a banner ant stretch it from top left to top right.
i do this with this code that is implement over OnPaint function.
everything is working fine.
CDC* dc=this->GetDC();
HDC memdc;
this->GetClientRect(&rect);
CBitmap bitmap;
bitmap.LoadBitmapA(IDB_HEADER);
BITMAP bm;
bitmap.GetBitmap(&bm);
int w = bm.bmWidth;
int h = bm.bmHeight;
memdc=::CreateCompatibleDC(dc->m_hDC);
::SelectObject(memdc,bitmap);
StretchBlt(dc->m_hDC,0,0,rect.Width(),50,memdc,0,0,w,h,SRCCOPY);
CString Title="";
m_Banner.GetWindowTextA(Title);
dc->SelectObject(m_Banner.GetFont());
dc->SetBkMode(TRANSPARENT);
dc->DrawText(Title, rect, DT_CENTER | DT_WORDBREAK);
problem is occur when the form scrolled with vertical scrollbar.
please help me for this.
thanks in advance.
To accomplish great things, we must not only act, but also dream;
not only plan, but also believe.
|
|
|
|
|
Le@rner wrote: problem is occur when the form scrolled with vertical scrollbar.
And what is the problem exactly ? First, what do you want to achieve? And then, what is your program doing which is wrong ?
|
|
|
|
|
when i scroll down the loaded image also moves down.
i want to stretch the image from top-left to top-right of form.its done by program.
please tell me how can i do this.
To accomplish great things, we must not only act, but also dream;
not only plan, but also believe.
|
|
|
|
|
You mean that it always stays on top of your screen even when you scroll down and you like it to move upwards instead ?
If that's the case, what you have to do is keep the scroll offset in a member variable of your class: each time you scroll up or down, you calculate the offset that you have to apply to the drawings and you store it in the variable (and then request a repaint of your view). Then, in the OnPaint method you use this offset in the second parameter of the StretchBlt function (the y-coordinate of the upper-left corner of the destination rectangle). The scroll is not automatically managed for you, so you have to compute yourself the offset you will apply to the drawings so that they are positionned correctly.
There are also a lot of remarks for your code which is not really clean: you are for instance mixing calls to the MFC and calls to the Win32. It is not dramatic but it is really ugly. You should stick to one of the two, and as this is an MFC application, you should stick to the MFC API only (this could sometimes be really bad to mix the two).
CDC* dc=this->GetDC();
Why do you call GetDC ? You are in the OnPaint method so you receive the CDC as an argument and you should use that one.
HDC memdc;
Use the CDC class from the MFC instead of the win32 API
bitmap.LoadBitmapA(IDB_HEADER);
Never never call a specific type of a function like that. You should always call the generic version (LoadBitmap). If you have compilation errors, I strongly suggest you read this article[^] to have a better understanding of character encoding.
memdc=::CreateCompatibleDC(dc->m_hDC);
Once again you are calling the Win32 function and you should call the CDC::CreateCompatibleDC instead.
::SelectObject(memdc,bitmap);
StretchBlt(dc->m_hDC,0,0,rect.Width(),50,memdc,0,0,w,h,SRCCOPY);
Same thing here.
m_Banner.GetWindowTextA(Title);
Same remark as before: use GetWindowText instead.
|
|
|
|
|
Hi
I tried to make a bitmap file from screen drawing. I used following function to get bitmaps data
GetDIBits(dc, hBitmap, StartScan, NumScans, m_pVoid, m_pInfo, Usage);
After I saved bitmap data to a file. I found that Bitmap was "rotated".
If the bitmap should look like: (Sorry, I don't know how to show a real bitmap here).
Each number is a pixel.
1234578
1234578
1234578
1234578
1234578
1234578
1234578
But I got:
5781234
5781234
5781234
5781234
5781234
5781234
5781234
What kind of reason will cause this?
Thanks,
modified on Monday, December 7, 2009 11:13 AM
|
|
|
|
|
What are you trying to do exactly ? What do you mean also by the bitmap should "look like" ? What are these numbers ? Bytes ?
Are you aware of the byte ordering (endianness[^]) ?
Without a bit more information about what you are doing exactly an what do you expect to have, it is very difficult to answer your question.
|
|
|
|
|
I can not put a real bitmap here. So I used some numbers here. These numbers mimic the bitmap what I got.
|
|
|
|
|
And ? An explanation of it would be usefull. Each number represents a pixel ? A byte ? Please, as already stated in my previous message, explain your problem clearly. We can't see what you are thinking and seeing you know.
You didn't even put any code how you "write" your bitmap (do you even write it back to a file ?)
|
|
|
|
|
Yes, Each number represents a pixel.
|
|
|
|
|
You cannot simply dump the bits into a file to create a BMP file.
A BMP file has a certain structure which consists of some headers before the actual data.
This article will give you an idea about saving to BMP files - Saving a Drawing to a Bitmap File[^]
|
|
|
|
|
I can open the bitmap file I created. It shows. But the image shown is wrong. The image was rotated (right part of image was moved to left side).
I also checked the bitmap data which I got from using "GetDibBits()". I found that data was rotated also.
Thanks,
|
|
|
|
|
That is exactly what I said.
It happens because the headers are not correct.
|
|
|
|
|
The pixel data of the bitmap are not put immediately after the header of the file. You need to check the documentation for the correct offset of the data in the file.
If you start from the wrong offset, the right hand side of each image scan line will show up in the left hand side, resulting in what you have gotten.
Hope this helps. Good luck!
|
|
|
|
|
As has already been suggested to you, you almost certainly have miscalculated the start position of the data in your file. That would easily explain the wrapping you have here.
To help prove / solve this, use (eg) paint brush, and make a bitmap there with the given colour depth / size. Then open that with a binary viewer, and compare its headers with yours. Hopefully that will show the mistake you've made.
These old formats are filled with versions, different behaviours, optional palettes, and other things that can be wrong very easily!
Iain.
I have now moved to Sweden for love (awwww).
|
|
|
|
|
I want to install a service in such a way that if started from service manager then It should start from a particular user account and not from System account. How can this be done ??
Kushagra
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
