|
Yeah! What he said! 
I don't have time to type something as long as Ashok.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I had also thought on similar lines. But, the problem areas in this approach could possibly be:
1. When ultimately the assembly is decompressed and decrypted just before its actual execution, it will either be in the form of a temp file (or may some other form of a physical file) or may be in the byte stream form. At that time, it is in its raw / source code form, and so if copied from there, it is exposed to the same risk.
2. Memory-dump at the time of the execution.
So, perhaps some further refinements may be required.
However, to be fair, something is better than nothing. Such a method can definitely keep it secret from "most" people if not all, and that is what should perhaps be the goal too.
|
|
|
|
|
|
|
I want to encapsulate the webbrowser even further than it already is. The reason is that I have tons of functions that operates on AxWebBrowser, so it would be logic to make these member functions of the AxWebBrowser class.
I always needs to load the same html page, so I do this in a member override:
protected override void CreateSink()
{
base.CreateSink ();
object empty = System.Reflection.Missing.Value;
this.NavigateComplete2 += new AxSHDocVw.DWebBrowserEvents2_NavigateComplete2EventHandler(VETViewer_NavigateComplete2);
this.Navigate("page.html", ref empty, ref empty, ref empty, ref empty);
}
What I am interested in is calling my functions like this:
public Form1()
{
InitializeComponent();
this.axWebBrowser1.Function1(); // This causes an error, since the navigateComplete2 event has not yet arrived
}
My problem is that I MUST NOT CALL ANY OF MY MEMBER FUNCTIONS before the NavigateComplete2 event has been fired.
I first thought the event would be fired on a different thread (so i could do thread synchronization), but that is NOT the case. It looks like the webbrowser waits for a navigatecomplete2 complete message, which will be called loooong time after Form1 has been completed. What can I do here? 
Gooky
|
|
|
|
|
New to C# here... Just wondering if there are any network libraries out there (or built-in) that allows the programmers to display IP address, MAC address, and other network information in a user-friendly window?
Any help would be appreciated!
-ap
|
|
|
|
|
|
Im having problems with an area of my form wich is transparent not invalidating properly if i have a control in that area then remove or move it an image of it is left behind has anyone got a surgestion?
|
|
|
|
|
Try this.Refresh(); after moving.
Or this.Invalidate();.
|
|
|
|
|
ive tryed both i dont thinks its a problem in the invalidating itself more in the fact it dosnt invalidate the transparent areas
|
|
|
|
|
Try :
this.SetStyle(System.Windows.Forms.ControlStyles.SupportsTransparentBackColor | System.Windows.Forms.ControlStyles.Opaque);
.
|
|
|
|
|
opaque makes the middel of my form go transparent  setting the backgruond to trasparent with supports transparent it gives me a cream background and my form flickers (even with doublebuffer)
|
|
|
|
|
I have noticed that Visual Studio .Net 2003 enjoys automatically adding dependencies to the setup project that cause the build to fail unless they are excluded. (ex. msado27.tlb, msado26.tlb, activeds.tlb, etc.) I am trying to build a large number of applications at once using a script which is not a problem when testing the script on my machine since it is the development machine and I have already excluded the "bad" files. The problem pops up when I try to build the applications on a different machine where Visual Studio believes that it should add different dependencies and therefore fail during the building of the setup project. 
I have yet to see the use of requiring a file that must be excluded.
Is there anyway to exclude files before they show up as dependencies? Like a list of files that if they show up, they are excluded? Or maybe a filter of some sort.... "Don't include *.tlb" :Hopeful:
Thanks
-J
Think of a computer program. Somewhere, there is one key instruction, and everything else is just functions calling themselves, or brackets billowing out endlessly through an infinite address space. What happens when the brackets collapse? Where's the final 'end if'? Is any of this making sense?
-Ford Prefect
|
|
|
|
|
I personally stopped using VS.NET 2003 for Setup Project. I took the time to write one batch installer, which is included with my ZIP-file and will install the directory to any location desired and make changes to the registry.
If you are not programming for profit, you might want to look into Nullsoft Installer or other "free for non-commercial use"-setup tools, which usually wield a much bigger palette of tools than the castrated "Windows Install Maker" included with VS.NET 2003
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
I appreciate the answer, but changing our installer is, unfortunately, not something we can do.
Thanks
-J
Think of a computer program. Somewhere, there is one key instruction, and everything else is just functions calling themselves, or brackets billowing out endlessly through an infinite address space. What happens when the brackets collapse? Where's the final 'end if'? Is any of this making sense?
-Ford Prefect
|
|
|
|
|
Hello all, I'm new here and I have some doubts with C#
I have to program a modem connection and I did not find any object in .NET 1.1 that could help me does any of you can help me?
By the otrhe hand I were thinking in try to configure the modem in Win XP and try to startup the connection from a process class, but in XP does not exits the old DLL that does this task, any idea?
Thanks in advance
David
|
|
|
|
|
How far down to you want to go?
I recon that you want to send data from one modem to another?
Most modems are connected to serial ports, so I would start by looking into serial port programming in .NET, followed by reading up on "Hayes Command Set" or "AT-Commands".
If you modem does not support AT-commands, scrap it and get a new one.
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
Thanks for your answer
Yes I'm trying to send info from una PC to another via modem, of course both are connected to serial ports, and both accept AT commands, but where I can find a good reference for prommaing the serial port for .NET?
TIA
David
|
|
|
|
|
I have read a similar question here on CP only a few days ago, either in this forum or in ".NET Framework".
I am too lazy to look it up now, but you should be able to find it 
Cheers,
Sebastian
--
Contra vim mortem non est medicamen in hortem.
|
|
|
|
|
I have found the need to convert a word document (its text, tables and images) to an XML file that could give a general layout like the world file. Firstly is there an easier way to do this other than programatic access to the Word object model? Secondly, if I do have to programatically accomplish this, I need to assign names to to the tables, images and text. Currently I'm trying either a caption or a bookmark, but there may be an easier way. By the way I'm using Word 2000 if that is of importance, and I am also using C#. Thanks.
|
|
|
|
|
One possible way to minimize use of the word object model would be to only invoke it to save the word doc in xml format, and then parse the MSxml into your format. If words xml output is as noxious as it's html it might end up being more work, I've never tried so I wouldn't know.
|
|
|
|
|
I would like to know how to get the name of the excel sheets in a excel file using odbc driver?
i do not want to open a excel object, since i have to process many files and the only information I need is the sheet name.
thank you
drey
|
|
|
|
|
Try opening it using the Jet 40 provider for Oledb (System.data.oledb classes), use Extended properties = Excel 8.0 in the connection string, Data source is directory, initial catalog is file name.
then try :
public DataTable GetTables(OleDbConnection conn)
{
conn.Open();
DataTable schemaTable = conn.GetOleDbSchemaTable(OleDbSchemaGuid.Tables,
new object[] {null, null, null, "TABLE"});
conn.Close();
return schemaTable;
}
Absolute faith corrupts as absolutely as absolute power
Eric Hoffer
The opposite of the religious fanatic is not the fanatical atheist but the gentle cynic who cares not whether there is a god or not.
Eric Hoffer
|
|
|
|
|
thank you, that would be perfect IF i could use the microsoft.jet.4.0 driver. But, so far I keep getting the message saying the that the porvider is not registered on the local machine.
Even thought, it is : I download the lastest, i check the registry and i manually register using the regsvr32 sqloledb.dll. but nothing worked. so, i decided to try the odbc and it works, but i do not know how to get the tables with it.
I appreciate any suggestions...
|
|
|
|
|
How can i disable icon of a form appearing in the status bar?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
