|
Dalek Dave wrote: I never knew a better tool for stripping wire than teeth. A lighter[^]. Also the ideal tool to hunt for gas-leaks.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
Ennis Ray Lynch, Jr. wrote: Nail Clippers are a good tool for running network cable.
Introducing Ennis McGyver, our new cable guy!
Marc
|
|
|
|
|
That is what I used to do over 20 years ago. Decent wire cutters cost around $50, and at the time and place, it exceeded the average monthly pay. Nail clippers were around $0.10 and worked pretty well.
This was for personal projects, of course.
|
|
|
|
|
A multitasking tool that reminds me of the Windows OS.
TOMZ_KV
|
|
|
|
|
After installing this lot[^] I decided today to go in and do some tidy up on the network.
First part was to switch the Ubiquiti gear over to DHCP and map into a reserved space on my home address table. All done ok.
Second part was to set up the address reservations for all the cameras and NVR (in preparation for switching them to DHCP later). All done ok.
Third part was to do some test to allow access to the NVR from the internet. I want to port map incoming 200 to internal 80 on the NVR. Where the hell is that on the D6300, yes there is straight forward x->x port forwarding, yes there is port triggering.
Searching the net for D6300 port mapping/translation/forwarding shows lots of examples with screenshots that show the external port to internal port tables, none of this is visible on my elephanting screen!
Finds another message [^] on the Netgear site that says this feature isn't available on the D6300 only the R6300. AAARRRRGGGGHHHHHH!!!!!!!!!!!! WTF is the difference and why not!
Suppose in the short term I'll have to change the ports to be the same. [head thumps on desk] )
AND, ordered up a new 15U rack last Thursday for in the loft to sort out all the gear in there. yes the 24-port patch racks and shelf and 8-way Power brick appeared yesterday, but not the damn enclosure. Guess who goes offshore tomorrow as well?
|
|
|
|
|
You should've gotten a separate modem and router; then you'd be able to flash the latter to DD-WRT[^] and have all the capabilities of a mid-range Cisco router instead of the arbitrary nerfing to up sell that is common in consumer models.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, waging all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
Finds another message [^] on the Netgear site that says this feature isn't available on the D6300 only the R6300. AAARRRRGGGGHHHHHH!!!!!!!!!!!! WTF is the difference and why not!
Questions answered in order,
1. Obviously, one has an R and the other a D.
2. So they can charge more for letters deeper in the alphabet.
|
|
|
|
|
Apparently the D model is the better one and is same as the R model except they ADDED ADSL2+ support to the D.
|
|
|
|
|
Is there any way to adjust how quickly the new tab bar repositions remaining tabs as others are being closed?
In older versions of FF I could place my cursor over the leftmost of a set of sequential tabs I wanted to close and just click away with the middle button until they were all gone because the tab bar wouldn't move anything until I moved my cursor away. In the new version the tabbar resets itself much faster and I'll often find myself closing a tab I wanted to keep open because I wasn't quite fast enough and the remaining tabs zoomed back to the right to fill everything up again. And while it's faster than the old version was if I start with the right most tab, it's still slower than the speed at which I can click, which combined the fact that a middle click in the empty space where a tab was restores a just closed one is equally maddening.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, waging all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
FireFox doesn't exist anymore. Use a normal browser
modified 20-Oct-19 21:02pm.
|
|
|
|
|
Not sure if you can do it while keeping the Australis tabs, but you can use an addon to change the tabs back to the older style, which behaves in the way you are used to.
You can also right-click on a tab and select Close Tabs to the Right.
What is this talk of release? I do not release software. My software escapes leaving a bloody trail of designers and quality assurance people in its wake.
|
|
|
|
|
I do use classic theme restorer with FF29; but it only changes the look of the Australis tabs. The middle click functionality (and several other idiosyncrasies) are still the new behavior not the old.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, waging all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
Strange. I get the old behaviour.
What is this talk of release? I do not release software. My software escapes leaving a bloody trail of designers and quality assurance people in its wake.
|
|
|
|
|
Hmmmm. I'm using CTR 1.1.8, are you using something newer? IF not, I'm guessing we've got a different set of cryptic options selected....
Edit: Playing around a bit more, it appears that my problem is being caused when I'm fast enough to middle click on the empty tab-bar space before the tab close animation completes. Disabling that (on CTR's Special 2 tab) appears to've fixed the problem.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, waging all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
How about this method:
Find the first tab you want to keep from the right and from the right-click context menu select "Close tabs to the right"
|
|
|
|
|
That only works if I want to close *all* the tabs to the right, instead of just some of them.
EDIT: Also I don't appear to have that menu item.
Did you ever see history portrayed as an old man with a wise brow and pulseless heart, waging all things in the balance of reason?
Is not rather the genius of history like an eternal, imploring maiden, full of fire, with a burning heart and flaming soul, humanly warm and humanly beautiful?
--Zachris Topelius
Training a telescope on one’s own belly button will only reveal lint. You like that? You go right on staring at it. I prefer looking at galaxies.
-- Sarah Hoyt
|
|
|
|
|
Drag and drop the ones you want to the left...
Those who fail to learn history are doomed to repeat it. --- George Santayana (December 16, 1863 – September 26, 1952)
Those who fail to clear history are doomed to explain it. --- OriginalGriff (February 24, 1959 – ∞)
|
|
|
|
|
It's out! A picture of the real OriginalGriff[^] [SFW / NSFL*] has been released...
* Not Safe For [your] Lunch
|
|
|
|
|
Liked the 'lonely nerd' title...
I'm not questioning your powers of observation; I'm merely remarking upon the paradox of asking a masked man who he is. (V)
|
|
|
|
|
Voted "Most likely to become a serial killer" in his high school yearbook (whatever one of those is).
Those who fail to learn history are doomed to repeat it. --- George Santayana (December 16, 1863 – September 26, 1952)
Those who fail to clear history are doomed to explain it. --- OriginalGriff (February 24, 1959 – ∞)
|
|
|
|
|
The only date he ever had was to the senior prom at school. With his mum.
|
|
|
|
|
...for which I am extremely grateful.
For the sake of his kids, if nothing else...
Those who fail to learn history are doomed to repeat it. --- George Santayana (December 16, 1863 – September 26, 1952)
Those who fail to clear history are doomed to explain it. --- OriginalGriff (February 24, 1959 – ∞)
|
|
|
|
|
Omb really ? I didn't know he is wearing glasses. How come he didn't share such important information!
Microsoft ... the only place where VARIANT_TRUE != true
|
|
|
|
|
They aren't glasses .... they are shields to keep dust out of his eyes when he moves at top speed!
"State acheived after eating too many chocolate-covered coconut bars - bountiful"
Chris C-B
|
|
|
|
|
That picture is of him moving at top speed!
Those who fail to learn history are doomed to repeat it. --- George Santayana (December 16, 1863 – September 26, 1952)
Those who fail to clear history are doomed to explain it. --- OriginalGriff (February 24, 1959 – ∞)
|
|
|
|