|
When you try to move the lid angle, you are flexing the keyboard case around the hinge. That is putting pressure on the PCB which mounts to it and that loosens something that has come "unstuck" - could be a solder joint, could be a connector, could be a flexi that flexed too much. If it's out of warranty then it's worth opening it up and checking ram and processor seating, having a look at flexi cables and how "straight" they go into connectors, that kind of thing. If it's in warranty, then it's "backup and send to the service center" time - these things don't get better on their own, and they generally need some serious soldering skills (or a new MB which is the modern equivalent).
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
You are probably right that it is hardware fault. BSOD is nearly always memory problem these days right?
Surely though the OP can test moving the lid without putting additional pressure on the base/keyboard?
I guess it's not clear if the problem is 100% reliant on lid movement or not.
|
|
|
|
|
You know, even if it is under warranty, and the memory is user-accessible, I would try removing and resetting the memory just to be sure it isn't just a loose stick of memory. Would suck to send it all the way back to the service center just to have them diagnose a loose memory stick.
On another thought, it could also be chaffed/loose wiring/harness. There are a lot of devices located around the screen (besides the screen itself), such as cameras, microphones, indicator lights and multitouch sensors. If you happen to have the lid open anyhow, look for areas where the wire insulation may have worn through by rubbing together or on something. Some electrical tape and/or heat shrink tubing may be all that's needed to solve the issue, saving you from having to buy a new laptop.
|
|
|
|
|
Thanks for the clues ! 
|
|
|
|
|
There are lots of possibilities:
loose or a broken cable to the display,
logic board is cracked where putting pressure on the hinges moves it,
a connector is broken or,
a cracked solder joint
or any combination of the above
|
|
|
|
|
|
This seems like a hardware issue to me. The BSOD is unexpected from a hardware problem of this nature but I expect it is because a connection is intermittent. The signal activates once and starts the sleeping procedure then it deactivates and and reactivates while the procedure is still in process and that results in the BSOD. That is just my guess though.
You should definitely begin taking backups.
"They have a consciousness, they have a life, they have a soul! Damn you! Let the rabbits wear glasses! Save our brothers! Can I get an amen?"
|
|
|
|
|
|
Last night my wife come home from work with five new ceiling fans because "none of the ceiling fans in the house are the same".
Because I had scheduled other (car) stuff for the remainder of the evenings , I was forced to install them immediately.
When we went to bed, we're both laying there, staring up at one of the new fans (which looked huge because we installed the UFO-sized light dome. It was perfectly balanced, so it wasn't doing anything but moving air. There was no wobling, or ticking - just the sound of air being moved. It bothered us both so much that we couldn't sleep.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
modified 8-Oct-19 10:54am.
|
|
|
|
|
You're not a huge fan of huge fans, I gather! 
Anything that is unrelated to elephants is irrelephant
Anonymous
-
The problem with quotes on the internet is that you can never tell if they're genuine
Winston Churchill, 1944
-
Never argue with a fool. Onlookers may not be able to tell the difference.
Mark Twain
|
|
|
|
|
The old fans didn't have the light dome, and the blades on the new fan were the same size as the old fan. I think it was the light dome that was freaking us out... 
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
|
At least it didn't beam you up[^] 
Anything that is unrelated to elephants is irrelephant
Anonymous
-
The problem with quotes on the internet is that you can never tell if they're genuine
Winston Churchill, 1944
-
Never argue with a fool. Onlookers may not be able to tell the difference.
Mark Twain
|
|
|
|
|
Oh good grief.
Did you watch the "cow abduction" sequence video?
Sent from my Amstrad PC 1640
Never throw anything away, Griff
Bad command or file name. Bad, bad command! Sit! Stay! Staaaay...
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Seems legit to me. Didn't you hear the Twilight Zone sounds? 
Anything that is unrelated to elephants is irrelephant
Anonymous
-
The problem with quotes on the internet is that you can never tell if they're genuine
Winston Churchill, 1944
-
Never argue with a fool. Onlookers may not be able to tell the difference.
Mark Twain
|
|
|
|
|
Venting another exhausting fan story?
| Ravings en masse^ |
|---|
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "If you are searching for perfection in others, then you seek disappointment. If you seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
Exhaust fan?
Are you thinking of a turbo?
I doubt John has that.
|
|
|
|
|
I guess my comment blew right past you.
| Ravings en masse^ |
|---|
| "The difference between genius and stupidity is that genius has its limits." - Albert Einstein | | "If you are searching for perfection in others, then you seek disappointment. If you seek perfection in yourself, then you will find failure." - Balboos HaGadol Mar 2010 |
|
|
|
|
|
A new wind is blowing
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
|
Turbos are gay.
If you're running boost, and it's all under the stock hood, you ain't doin' it right.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
|
I knew I could trust you.
|
|
|
|
|
The old fan made a noise? You felt like Vinnie last night, couldn't sleep in the quiet.
|
|
|
|
|
I get it. I have tinnitus from years spent working in an old school computer room: an acre of mainframes, the old washing-machine style disk drives, and line printers, producing an incredible amount of noise. I have to sleep with a fan running or the ringing in my ears will keep me awake.
Software Zen: delete this;
|
|
|
|
|
|
QA in video form 
Not gonna lie, I had to do a "live coding challenge" as part of a remote interview once and googling syntax in one window while trying to continue typing in the code window to hide the fact that you're google in the background was pretty challenging....I'm sure they were onto me
|
|
|
|
|
A "live code challenge" should not preclude one from using google. I google pretty much everything before doing any coding. It's not "cheating" - it's "coding". There's simply TOO MUCH to learn nowadays, and there's no way a normal person can learn and retain it all. Expecting that is not only unreasonable, but is absurd as well.
".45 ACP - because shooting twice is just silly" - JSOP, 2010
-----
You can never have too much ammo - unless you're swimming, or on fire. - JSOP, 2010
-----
When you pry the gun from my cold dead hands, be careful - the barrel will be very hot. - JSOP, 2013
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
