The Lounge is rated PG. If you're about to post something you wouldn't want your
kid sister to read then don't post it. No flame wars, no abusive conduct, no programming
questions and please don't post ads.
In a much poorer youth I had to exchange the gearbox of my fathers Citroën GS, using a Haynes manual.
To say that the instructions were incomplete is quite an understatement.
You couldn't remove it downwards as the wheel suspension subframe was in the way. So I had to remove the engine.
The engine couldn't be lifted upward, because there was a strengthening beam going between the wheel arches.
So I had to remove the front of the car in cluding headlamps and everything, so that I could lift the engine forward. We didn't have an engine lift.
Try to imagine in how many ways the manual was incomplete when the job had this many steps, as described in chapter 11.
This whole job took me two weeks. But I learned a lot during the experience.
A couple of years later I had a Ford Granada. It was a bit simpler mechanically.
And I had to exchange the clutch on it.
That took me two and a half hours including lunch. Still using a Haynes manual.
Experience helps a lot. Not having a Citroën helps more.
People say nothing is impossible, but I do nothing every day.
I feel your pain! My first car was a Lancia 2000 HPE and no two were alike, so you had to remove a component and take it with you when you went for a spare part.
That thing was serious fun to drive, but as PITA to work on - you couldn't remove the fourth spark plug without dismantling the cooling system as one of the rigid pipes was routed over the top so you couldn't get a plug spanner on...
Edited: gesture typing on Nexus tablet works only if you keep an eye on it...
If you get an email telling you that you can catch Swine Flu from tinned pork then just delete it. It's Spam.
I meant to ask this earlier, but have only just remembered.
My brother has trouble getting a strong wifi signal from the area of his house furthest away from the wireless router and wants to know how to strengthen the signal.
I suggested he buys bigger antennae for the box (may not work) or splashes out on a powerline adapter (which will).
I have no need for such a device so have no experience using them, but I am sure the intelligentsia can offer a few suggestions as to which one to recommend to him.
Are they simple to use and install? (He will be doing that, I shall be elsewhere) and are they safe should there be a power surge?
--------------------------------- I will never again mention that I was the poster of the One Millionth Lounge Post, nor that it was complete drivel. Dalek Dave
I bought one of these for my dads house, you just plug it into a wall socket at a suitable point. You then connect up to it via wifi set the wifi password and ssid of the wifi you want to boost, job done. No need to touch the original one.
I set it up with a mobile phone, didn't even need to use a computer.
He should first check if he is able to boost the signal strength by going into the settings for the router. Mine gives me a drop-down list with values from 25 mW to 400 mW. It was set to the highest by default, so if that is the norm, then that will not do much good.
Altering the length of the antenna will not necessarily work. The antenna used on both sending and receiving devices is "tuned" to the frequency of the carrier signal (details: it should be either one quarter wavelength or 3/4 wavelength at the speed of light).
My recommendation is to somehow move the devices closer together or buy a repeater or second hot spot. I am about to do this myself and haven't figured out why there is a vast range of price for similar boxes. I am looking for one that has several cat 5 ports at 10/100/1000 and firewall and hot spot. The price range is $39 through $200+ for similar functionality as described on the packaging.
A number of inexpensive wireless routers can be configured for repeater duty. I'd recommend that course first, as few devices these days offer an external antenna connector. While you might not be able to be there with him, I'm sure you can download a pdf of the manual and walk him through the configuration over the phone.
Like others have suggested the antenna should work, but also check the location of the router. It should be away from cordless phone / microwave oven. also try changing the wifi channel on the router, sometimes it has interference from neighbours wifi / your own cordless phone. Also it should be higher from the floor and away from the wall.
Normally, antennae are tuned to the frequency of the signal they produce, fitting a different sized one is likely to drop the signal strength. If you have a spare or cheap wireless router you can turn it into a repeater. The router might support this out the box, if it doesn't you can upgrade the firmware. This article[^] gives an overview of doing this (with one of the WRT variants in the article, you could also consider Tomato[^])
The other thing I have heard (but don't know if it is true) is that the firmware on the router restricts the output power. There may be an option to boost the power, or possibly your could replace the firmware with the above. If you do decide to flash a router, make sure you check the compatibility list for the firmware you are using. Also flashing like this will invalidate the warranty, in case your friend worries about such things.