|
That's already on the way. Original dirt from Vietnam.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Was it expensive? Or was it dir... No, I can't bring myself to say it.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
Even cheaper. It's FREE and being brought to me personally.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Charlie don't surf! , I don't know if it would work, I had success with Hawker Typhoon painted it up glossy & perfect, then went over it with some rusty steel wool in some area around the chin air intake the paint was thin scuffed it off then went to work with a Steel Effect magic marker. Worked quite well...
|
|
|
|
|
No, Charlie don't surf. Especially not with a gunship. I printed a surfboard, but there is not enough room for it between the landing skids and the rocket launchers.
Weathering with oil paints only works if you have used acrylic paint up to then. Acrylics are not affected by the generous amount of thinner you have to apply. With enamels this would turn into a smeared mess. Take a look: [^][^]
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
you don't have to use lots of thinners for weathering effects with oil. I've used oil weathering on oil "top" coat with good effect on railway models. Use a small amount of paint on the brush, and put 99% of it onto a bit of scrap card, so the brush has almost no paint left; then use a stipple technique. Practice, practice, practice first though on anything but Huey! 
|
|
|
|
|
A sort of Dry Brush effect?
|
|
|
|
|
Thanks! I already have been practicing on a piece of cardboard which I decoratedbwith some lines of rivets, some panels and of cours a spray of the Huey's green paint. My results are not always subtle enough yet, so I guess I need some more practice. Simple things, like that pin wash of the doors yesterday already go quite well and also bringing out the Huey's 15+ meters of rivets with a brownish wash should be no problem.
I have lived with several Zen masters - all of them were cats.
His last invention was an evil Lasagna. It didn't kill anyone, and it actually tasted pretty good.
|
|
|
|
|
Looks great! If you want to vary the finish a bit further you might try using different clear coats over the top - gloss, matt or combinations
|
|
|
|
|
I reinstalled my laptop, did a complete format of all my partitions and created them anew.
The first thing that I thought was really weird is that the installer told me to sign in with my ex-employers work account (I bought this laptop from them).
I mean, how would a fresh install know this is a laptop from my ex-employer?
I never had any problems with this laptop, it all started when it was reinstalled a little over a week ago.
It just doesn't boot correctly.
The first time I boot nothing happens, I just see black screen and after a minute or so the keyboard lights up until it goes idle.
After turning it off and on again the Dell logo shows up and... Nothing happens again.
After turning it off and on a second time the Dell logo shows up again and after way too many seconds a spinning icon appears and Windows starts up (total startup time about two mintes!).
And now, after a clean install, it still does that!
It could be a hardware problem, although the hardware diagnostic tool said everything was fine.
Besides, the hardware didn't change, it just got reinstalled.
But it doesn't seem to be a software problem either as it was wiped twice and it somehow persists over multiple boots.
I just don't understand how it boots differently three times, but always in that same pattern!? 
When it's booted everything works fine.
Even a regular restart (without turning it off completely) works fine, about 10 seconds boot time.
This is by far the weirdest issue I've ever encountered and it taught me one thing: I know absolutely nothing about computers 
The ultimate question, of course, what's wrong and how can I solve it?
|
|
|
|
|
Did you download a new OS ISO, or did you use the backup restore disks? If the latter, maybe it is a custom build for that company?
|
|
|
|
|
I used some Windows tool, which I presume downloaded a new ISO (it downloaded long enough anyway).
But perhaps it still took something from a restore disk anyway?
|
|
|
|
|
I would try the following:
- Go into the BIOS, and ensure that it has no odd settings (BIOS password, device boot order, etc.)
- Get a thumb drive (8 GB or more)
- Go to another Windows 10 computer and download the Windows Media Creator
- Run this, and create a Windows 10 installation thumb drive
Make sure that you download a version for which you have a license (e.g. don't download Windows Pro if your license is for Windows Home) - Use this to boot your computer
- Install Windows from scratch (including a format and repartition of the hard drive)
- Open File Explorer, Right-click on "This PC" in the left-hand window, and select "Properties".
- Scroll to the bottom of the window. On the right, you will see an option to change the product key. Click this, and enter your new product key
This should overwrite your employer's record of Windows in the BIOS and in Microsoft's servers. - Lastly, go to Dell's site, download their tool that updates all Dell drivers, and run that to get their latest stuff.
Freedom is the freedom to say that two plus two make four. If that is granted, all else follows.
-- 6079 Smith W.
|
|
|
|
|
Sander Rossel wrote: I mean, how would a fresh install know this is a laptop from my ex-employer?
Some sort of bios password?
Suggest a reset - remove the CMOS battery for a bit to reset. Might also check for Dell bios updates while you're at it - I've had good results (er, with desktops anyway) with their updates.
[edit] And since you're investing some time here, strongly suggest swapping in an SSD before the next install [/edit]
modified 1-Sep-19 18:17pm.
|
|
|
|
|
On laptops' hard drives, there are often hidden partitions; could it be possible that you only wiped partition(s) which could be seen?
I'm using Ultimate Boot CD when I want to have a rather precise clue about how a disk has been partitioned. Maybe you could gain some knowledge about your issue from it?
while (!(success = Try()));
|
|
|
|
|
Hi,
Sander Rossel wrote: The first thing that I thought was really weird is that the installer told me to sign in with my ex-employers work account
Are you using a corporate volume license or an OEM key when you install Windows 10?
Windows 10 Professional or Enterprise?
Best Wishes,
-David Delaune
|
|
|
|
|
Been there done that - bought a grey market licence to get around w10s draconian licencing. I'd bet the hard disk id is registered with MS somewhere and it references that to determine the owner. I would consider getting a new SSD as your primary drive, that may allow you to do a clean install.
Never underestimate the power of human stupidity -
RAH
I'm old. I know stuff - JSOP
|
|
|
|
|
Sander Rossel wrote: The ultimate question, of course, what's wrong
The computer takes two minutes to boot.Sander Rossel wrote: and how can I solve it?
Don't shut it down.
Or press the "Go" button, then go and start making coffee/grab a newspaper and read a paragraph and a half of a story that interests you/look at a Rubik's cube, twist it twice, then put it down/anything else that will keep you busy for this Huge amount of time.
It's two minutes. I imagine that you might have somewhat more pressing issues to spend your time on.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
The problem isn't those two minutes, it's that it first fails booting at all twice and then takes about six times longer to boot than it should.
I could ignore it now and wait until it completely fails on me when I'm doing a demo for a potential customer or I could spend some time now to solve this issue and save me a lot of frustration and haul in that customer later.
|
|
|
|
|
OK, having taken the time to read all the details (which takes longer than two minutes -- I could boot a computer in that time!) I'm now wondering why you are hoping that reinstalling windows will fix a problem that is arising before windows loads.
Take a look at your BIOS settings.
In particular, check the BIOS version, and download and flash the latest if it's not.
If it is the latest version, just go through all the settings (with a guide open on another machine), paying special attention to HDD and memory settings.
There's also the possibility that you might need an older version of the BIOS, but let's leave that until last.
I wanna be a eunuchs developer! Pass me a bread knife!
|
|
|
|
|
I believe you're looking at a combo of what Phil and David writes about.
|
|
|
|
|
I assume you've checked the boot device sequence in the BIOS..? Maybe it's trying to boot over a network interface rather than from a local device. That (might?) explain the prompt for your employer's credentials. It would also explain a long delay at boot while it tries to find and/or download boot data from the network. I've never tried a network boot but googling gives plenty of experiences...
|
|
|
|
|
Hmm, if you are using UEFI check whether the Secure Boot option is enabled. If it is then try disabling it. It is the only thing I can think of, so it is probably wrong 
|
|
|
|
|
Have you tried doing a UEFI reset? UEFI is waaaaay more complicated than the BIOS used to be, and remembers more stateful data than BIOSes ever did. This Dell support page might help...
Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p
|
|
|
|
|
My guess would be that they re-wrote the Computer's BIOS chip. You might be able to wipe that by downloading a tool made for your motherboard by the manufacturer or possibly a 3rd party. Then you can update the BIOS chip from their site and use it to over-write the existing one.
Keep in mind, some computers use a software form of BIOS, so you first have to figure out which type. Then you will know which type of tool you need (in the event that the manufacturer can't or won't help). To get the ball rolling, get the model number and manufacturer of the computer then google those and keep the serial number written down just in case you need that too.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
