|
There are certainly some good titles in there to easily make it worth the $30 price tag. Guess I'll be expanding my Steam library.
|
|
|
|
|
@OriginalGriff will be pleased to know that VS2019 has another update to install now - 16.5.2 was just released.
Visual Studio 2019 version 16.5 Release Notes | Microsoft Docs[^]
It only seems to be a 486MB download this time - that's roughly half the size of the regular update to my graphics driver. 
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Great! I just succumbed to the nag last week and already there's another one! (at least this one is smaller) I also see one pending for VS 2017. 
"Go forth into the source" - Neal Morse
|
|
|
|
|
kmoorevs wrote: Great! I just succumbed to the nag last week
I run vs in a VM with the windows firewall blocking all outgoing traffic except a few selected port rules.
No nags; I'll only let the kids out to play when I've got time to watch and know it safe.
... and to be fair vs ain't the only daily 'whaddaboutme' package.
reminds me of the old saying: Children Aussies (whinge way more, and that accent!) should be seen, not heard.
|
|
|
|
|
Downloading at the moment ... 
Make that "Installing at the moment"
"I have no idea what I did, but I'm taking full credit for it." - ThisOldTony
AntiTwitter: @DalekDave is now a follower!
|
|
|
|
|
Only 486 MB?  They probably just fixed a typo... 
GOTOs are a bit like wire coat hangers: they tend to breed in the darkness, such that where there once were few, eventually there are many, and the program's architecture collapses beneath them. (Fran Poretto)
|
|
|
|
|
Stefan_Lang wrote: Only 486 MB? They probably just fixed a typo...
No, it is a subtle change in shade of one of the icons
|
|
|
|
|
Invariably I have to reboot my cable modem.
It is more rare than at the last place I lived -- we get much higher speeds here and it is more consistent.
However, I still have to reboot sometimes.
Will the Real Engineer, Please Standup? Please Standup!
Can someone tell me why this helps?
Do the bits get stuck in there and clog things up?
1. What are the real reasons that cycling power helps?
2. If that helps, why don't they have a button that lets just the specific firmware be rebooted? (kind of ridiculous question, but it'd be nice.)
Ok, now I'll just sit back and wait for the answers to start pouring in. 
|
|
|
|
|
The wires get too hot. 
I have considered putting mine on a timer so it is powered off from midnight to dawn or so.
|
|
|
|
|
PIEBALDconsult wrote: The wires get too hot.
Hey, seriously. I wondered about that myself.
But, my modem sure does make great toast!
|
|
|
|
|
Great suggestion, I may try that to save a bit of power. Even though my modem runs for months without a reboot.
|
|
|
|
|
maybe memory leak in the firmware ?
I'd rather be phishing!
|
|
|
|
|
Maximilien wrote: maybe memory leak in the firmware ?
Yeah, I bet that is a good a guess as any.
Well, someone should create a modem that never needs to be rebooted!
Ok, I've given this Billion-dollar idea away, now someone please build it and sell it for $50.
|
|
|
|
|
but can you also supply the codes?
|
|
|
|
|
My first thought as well.
Then: It is my honest opinion that firmware should not use dynamic allocation of memory at all. It has a well defined job to do; the memory requirements for all tasks should be possible to calculate in advance. That is, the code and data should be structured so that it is possible to calculate all memory needs in advance, and to set off that memory at compile time.
There are reasons why Fortran (with no dynamic memory allocation, and for many versions without a stack - no recursion possible) held up for so long. One of the reasons was that is was reliable wrt. memory allocation: It would never crash due to a failing new() or a too deep recursion.
Ada, made for military robustness, did allow recursion, but only if a static code analysis could calculate the deepest nesting level and stack requirement.
CHILL, created for embedded code in telephone switches, required that you marked functions that are to be called recursively. I don't think it made any difference in generated machine code; it was just a way for the compiler to raise a red flag: Here you make a recursion to a function that is not marked as RECURSIVE. Look out - maybe you will run into stack issues.
Embedded code is executed in an environment where you don't have the same facilities as for desktop applications. Often, less resources are available; you can't just let the stack grow to fill those 16 GBytes of RAM. So, the programmer cannot be allowed the same freedom as a standard application developer. Far more restrictive use of dynamic memory and stack are among the limitations an embedded developer should accept.
I know well that this is certainly always reality in embedded code.
|
|
|
|
|
Great post. Those are some great points.
and I guess the thing is that I have this piece of nifty hardware that feels like an FM radio receiver or something that just works all the time.
You know what I mean...you never had to reboot your FM radio receiver. There were no chips that got full. It "just worked"!
Anyways, I have this hardware that feels like hardware but it is actually software inside a brittle plastic box and it is, of course, the software that is broken.
It's always software down at the bottom ruining everything.
Also, I know the FM radio receiver was analog and wasn't a computer and that's why it "just worked". Which makes me wonder...Instead of Quantum Computing maybe we should switch back to Analog Computers so they'll be dependable. 
We don't need no stinking software!
|
|
|
|
|
I'm glad I'm not the only analog electronic fan (in some areas)
For example I'm fed up with digital switches that keep draining batteries even when you switch off (Hey Sony A7 or Thinkpad8, can you hear me?) or refuse to power on when you switch on and you have to hold the switch down for 1 minute 😡
And then do you want to compare the pleasure and comfort to feel with your fingers a phisical switch you can operate even in the dark vs a touch one?
How about the pleasure to fine tune FM radio with an analog tuning wheel vs a beeping digital RDS scanner deciding instead of you which tunes are ok to play and which ones are to bypass?
An analog volume amp vs a digital one?
The 1st analog walkman and its headphones vs the new digital players with earbuds?
The 80s analog HiFi systems vs the current digital micro HiFi?
Am i the only analog nostalgic?
Please bring back some old school analog devices 🙏 even at premium price I'd buy some
|
|
|
|
|
I'm with you on about all of that except volume controls on things. It would usually be nice if there were more bits used in the digital signal that was converted to a voltage before being used to control the amplification rate, I will admit that. But potentiometer volume dials on portable audio devices without exception for me, always developed regions of high-resistance (low volume) [+]/[-] buttons never had this problem.
However, actually - after getting a 1/2 decent car-stereo, I wouldn't buy an analog unit if they were free. The DSP and the included impulse responses can make poorly positioned speakers magically sound like they've moved from calf-height to shoulder height. I could never wrap my head around that before looking at convolution, fast fourier transform and a bunch of other software tricks. Tricks unavailable without a cpu.
|
|
|
|
|
enhzflep wrote: The DSP and the included impulse responses can make poorly positioned speakers magically sound like they've moved from calf-height to shoulder height.
Not only speaker placement and such...
In 2016, the last year before Norway closed down FM transmissions in favor of DAB, I spent weekends and summer vacation driving up and down the country to compare signal and sound quality. I upgraded my car radio to a quite expensive one, but also tested with a cheap, battery portable radio, with no fancy circuitry. In locations where the signal was so weak that you could hardly make anything out of the "slightly modulated noise" in the portable, the sound from the expensive, heavily DSP-equipped car radio was … well, certainly not without distortion, but it was certainly well within the acceptable for car listening.
The only "problem" if you are in a hurry  is that the DSP takes time! Don't synchronize chronometers, one by a primitive, straight through radio, and the other one by a radio with heavy DSP. The latter may be at least a second or two behind.
|
|
|
|
|
|
I partially agree, but maybe for more "abstract" / conceptual reasons. When a value is measured as opposed to counted, it the value is analogous to the real world phenomenon, you have an analog value. I hate digital speedometer, where I must continuously interpret a numeric value and compare it mathematically to the speed limit … It does not require any major mental effort, but it is so indirect! My speed is a natural phenomenon, completely independent on Arabic numerals in a base 10 number system. The speed limit is a point on a continuous scale, and the needle should not move past that point. Simple and direct.
Watches are similar: Twice as long time is twice as large movement. Direct and logical.
Then comes these who make everything into curves and bars and whathaveyou. I've seen recipes showing that you need five apples as a bar of length 5, rather than as 5 countable apple icons. Please leave countable values in the countable domain! (Or as we computer guys say: As integers.)
AReady wrote: How about the pleasure to fine tune FM radio with an analog tuning wheel vs a beeping digital RDS scanner
This is where I am beginning to disagree somewhat ... Sound is, in its nature, analog. The selection of one radio channel among a countable set of channels is not an analog operation. Conceptually, it belongs in the digital domain.
Furthermore: We have had all digital DAB radio for three years in Norway. Three years completely free of hiss due to poor signal. Free of electrically induced nose - car ignition and such. Free of interference from neighboring channels.
From a technical viewpoint it has some great advantages as well: It is extremely modest in frequency and bandwidth requirements: A 2 MHz frequency band covers the entire country; you never need to allocate another transmission channel (frequency) for that set of program channels. A transmitter draws a fraction of the electrical power of an FM transmitter covering the same area, carrying 12-20 program channels rather than a single one. If the signal from the transmitter to the north is too weak, and so is the signal from the one to the south, maybe the sum of those two signals is good enough. If it is not, there is no need to set up a huge full power transmitter between them: A small, cheap transmitter that adds to the two (or more, or one) existing signal to raise it up to the required level.
There are several countable, non-continuous aspects in the radio: The selection of a multiplex, of a program channel within that mux, the set of transmitters, the mux ID and program ID, the supplementary text (like RDS text), ... Really, the only continuous, analog component is the sound itself. And that has improved greatly when going from FM to DAB; I'd say extremely so in you car radio when driving around in the Norwegian valleys with mountain sides for the FM waves to bounce back and forth between, and hills to shade the signal down to a minimum value (and below).
The radio system seen as a whole: I am certainly not nostalgic, longing back to the FM days. The switch to DAB has been a great step forward in all significant aspects. The only thing that was made wrong is that it took 20+ years from it was standardized until it took over (and in several European countries it is still secondary, while we wait for the FM transmitters to break down from old age). If DAB had been pushed through ten to fifteen years earlier, it would have hit the (end of) the great radio years. It is a pity that we introduce a truly great radio technology at a time when ever fewer people listen to the radio.
(This is in particular if you distinguish between "hearing" and "listening": Listening is wanting to hear. Not just hearing some background music, which can come from any jukebox-type source, but listening to a great radio play, in depth news reports, causeries, reports from festivals all over, debates, ... all the non-jukebox stuff. People of today seem to value that stuff down; they don't need the radio to hear some background music. Without listening.)
|
|
|
|
|
Wow great post, congrats!
I wanted to reply yesterday but my 40EU/month ADSL from Vodafone Italy is completely unusable in the evening, the provider can't handle the incresead traffic due to covid emergency (young people stay at home watching netflix instead of going out)
Regarding the 1st part of your comment about converting infinite scale signals into finite entities (digits) I guess it's all about resolution. If the converter has more resolution than our senses can perceive than there is no difference between digital and analog, that can apply to color or sound fidelity for example.
My original comment however was more about the "feeling" you get while using a device. With analog devices I could get more physical feelings. When I was a teen in the 80s I had a great experience listening to my pocketable analog stereo radio on my bed using over-the-ear headphones (same as 1st walkman model) . The tuning wheel was so precise and sensitive I could feel like almost catching the waves with my fingers, If I heard a nice song a bit disturbed I could easily adjust the quality by moving a bit the radio in my hands. Overall I could listen a sound full of juice and with wide open stereo, yes maybe a bit of background white noise but overall I got very good vibes and feelings. Current pocketable devices sounds dull in my opinion and the interaction gives no "physical" feelings. It's difficult to describe but I hope you understand what I mean.
Another pleasent "analog" experience I forgot to mention is car A/C. Until early 2000 you could find cars with manual A/C, that is you tune the temperature with a mechanical wheel. I loved that because I could fine tune the temperature based on my physical feeling and I could do it while keeping my eyes and focus on the road. Today you have touch screen UI where temperature is chosen by clicking a touch screen icon '<' or '>' and it increments the desired temperature number to 20, 21, etc. with a stupid sensor placed who knows where that decide instead of me how much cool air to pump in. When you click the icon you risk an incident because your eyes and focus go on the touch screen 😱 Car assistant can help but once I rent a car that suddenly started to talk French for a software bug 😱
Even my Philips razor and hair cutter are now digital with touch screen interface, lcd displays and sealed li-ion batteries and often they don't do what I want. The razor software switch now randomly doesn't turn on so I bought a low cost double AA battery razor with analog switch. Such a relief! Damn you just need to turn on and off a rotating blade, why to throw in all that digital sh*t?
What I want to say is that digital has certainly brought us many great things but there are some areas where analog was simpler, more effective and pleasant. I guess Jamiroquai anticipated this with "Virtual insanity" song.
So I hope that when this digital fever will be over some good sense analog electronics will come back
|
|
|
|
|
Touch panels are not calibrated for my fingers. Maybe the skin on my fingertips is to dry, or too oily, or too warm, or too cold, or too conductive, or too isolating, or ...
Whatever the reason: I never can make a touch control panel work on the first try. I have to tap at least two or three times to get any response at all. Some of them are extremely sensitive on your speed as well: Our office coffee machine is one of the few that takes my tapping at the second try - it changes the icon when it reacts. But if I give it a brief tap, it says "Oh, so you just touched me by accident. Then I'll go back to square one". So I try again, pressing a little longer, and it says "I see that you keep pressing, so I assume that you changed your mind and want to cancel it". The tapping must be exactly the right duration (or at least within very narrow margins) to work.
None of my coworkers have problems similar to mine. They stand around watching me try again and again. Maybe on the fourth try I succeed in getting some respones, plus tapping with the right duration.
Texting on my smartphone simply doesn't work, so I bought myself a Bluetooth keyboard - that works well. My baking oven is not that sensitive to the duration of the tap, but it isn't very sensitive at all - I may be tapping five of six times for it to respond.
I don't mind Up/Down pushbutton pairs replacing a dial. My portable radio has a single dial, used for scrolling up and down in various menus; that is fine with me. I am not bothered by digital controls. But I hate touch panels!
|
|
|
|
|
I guess it's time someone explains manifacturers the KISS software principle! 
It was nice to chat with you
Greetings from my home/prison 😰
|
|
|
|
|
Allocating most memory during initialization, based on configuration parameters, is good practice in servers.
I worked on telephone switches and never wrote anything recursive. But I did write some interesting code in which function #1 invoked function #2, which in turn invoked function #1.
A former boss wrote the code for call waiting. When one of the calls needed something done on the other call, it sent a message. After several releases the code stumbled into an obscure path where the two calls just kept exchanging messages, creating an overload situation. Although there was code to guard against one call getting into an infinite loop, this hadn't been anticipated. When the code was fixed, defensive code was also added to guard against any one call using an unbecoming percentage of the CPU time.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
