|
Hello,
I accidently uninstalled the messeger service on my system (sc delete Messenger). How do i reinstall it.
Thanks a bunch.
|
|
|
|
|
LordsAngel wrote: How do i reinstall it.
Try to check the command sc -create. On the other hand, try to check at the Add/Remove component feature.
Try to read this article[^], it might give you some idea.
|
|
|
|
|
whe when i use map network Drive in windows XP
in phase of authentification ( username and password ) the username came guest and can't change it :S how can I solve this problem
thanks
DADAX
|
|
|
|
|
This problem cause in windows xp service pack 2 feature. My teacher used to teach me to solve a problem but I forget it. I just remember that you need to change some configuration of windows firewall in control pane. In my opinion, when you mapped a network drive, you should click on the link of logging using a difference user name and password. Then give an appropriate share name and host name. When I get the solution from my teacher I will let you know.
|
|
|
|
|
Thanks but waiting your teacher 
DADAX
|
|
|
|
|
|
Once again I need to change an environment variable on my system, and once again I've got to navigate to the buried button Start | Control Panel | System | Advanced | Environment Variables, to be presented with just about the most frustrating pair of dinky dialog boxes for editing environment variables.
Is there something better I don't know about? If not, then what is wrong with those Microsoft developers? Don't they ever need this thing? Don't they realize how absolutely retarded it is? What's the big deal about making a replacement for this juvenile effort and relieving millions of developers (and millions more users) from the repetitive UI gestures needed to modify simple strings?
- Owen -
|
|
|
|
|
Owen Lawrence wrote: once again I've got to navigate to the buried button Start | Control Panel | System | Advanced | Environment Variables
You should right click on your computer and choose properties and go to tab that provide you to access environment variable.
Owen Lawrence wrote: Is there something better I don't know about?
To access environment faster, you should copy the short cut of command prompt to your desktop. Then you can set the evironment variable by using the command SET. Is this what you want?
|
|
|
|
|
Well your first suggestion saves me one mouse click, so thanks for that. I've always known about the SET command, and a lot of times I use it. But that's really not much better.
Even regedit is easier to use than these monstrosities. (Don't get me started on how bad the cmd shell is!)
- Owen -
|
|
|
|
|
Owen Lawrence wrote: Well your first suggestion saves me one mouse click, so thanks for that
I'm very happy that I could help you to reduce some problem. We are here in code project always help each other as much as possible when someone need any suggestion or comment. I'm very glad to support 
|
|
|
|
|
Because it's a depricated way to store data, and MS doesn;t want to spend money on upgrading legacy interfaces.
|
|
|
|
|
Hi, I have perform in System Preparation tool to image the current windows xp and create it in an image file. The document state that if user want to setup windows by using system preparation tool, the systme will build an image file. Then user need to copy an image file to install on a difference computer. But after I have setup a system prepartion tool, i could not found where is the location of an image file that store on the computer? Could any one have any experience of location of image file?
Thank in advance
|
|
|
|
|
Hi,
I have a problem while perform an unattend installation by using an answer file. I have exracted the setup manager from the deploy.cab file to c:\deploy folder and every file are extract by default. Then i start to use the setup manager to create unattend installation by using the READ ONLY mode for user. After set all of necessary configuration, I save the asnwer file to c:\deploy\read only.txt path. There is no UDF file because i didn't set any multiple configuration for multiple computer. I just want to test the unattend installation only. In the folder, there are two file are created after i saved the answer file. These file are "read only.txt" and "read only.bat". And the source file are set to copy from the CDROM during an installation. From the document that I read, when i need to perform an installation from the answer i have to type the following command at the command prom: winnt32 [/unattend[num]:[answer_file][/udf:ID[,UDB_file]] where the command winnt32 is reside. Because I have no UDF file create, i start to type the following command from the command line d:\i386\winnt32 /unattend:"c:\deploy\read only.txt" and press the enter key. The setup could not begin and prompt me that the path to read only.txt is invalid. I already check the file path and there is no problem with it. I read the deploy.chm about unattend installation and read from the book, i just found the syntax as i type in above. I know that my command line might have something ignore that cause an error. If any one know the correct syntax based on an information that I provide, could you help me to correct the syntax of the command that I type in the command prompt?
Thank in advance
|
|
|
|
|
we have created a service having following parameters on Windows XP:
1) servicetype: service_win32_own_process
2) controls accepted: service_accept_stop
in createservice() foll parameters were passed:
1) desired access: service_all_access
2) start type: service_auto_start
3) servicestartname: (NULL)LocalSystem account
4) password: NULL
the service runs fine with computer administrator account but we cannot start/stop the service on a user with limited account.
pls suggest a method such that we can start / stop the service on limited account also.
|
|
|
|
|
how can i put my project folder in repository on server to access the project by all team member. i wanna use cvs for it...but how ?
I dont know that where should i put my folder in server
Dinesh Sharma
|
|
|
|
|
Log onto CVS using your admin account. Use "import module" command. Are you using WinCVS?
ARSALAN MALIK
|
|
|
|
|
I am using cvsNT and tortoise CVS but i know nothing about it... that how to use it ...I am working on ASP.Net so if it would be on server and i 'll access it through client i'll have to configure IIS also.....how is it possible...
pls suggest
Thanx
Dinesh Sharma
|
|
|
|
|
Developing project with EVC++3.0 and EVC++4.0 I have the following problems:
- the environment is working too slow as if there is lack of memory.
- the project is loaded slow, sometimes 4-5 minutes(and it's not big project).
- putting a breakpoint, new line in the source or 'Go To Difinition' to any function is "freezing" the screen for about 20-30 seconds
I clean the intermediate files of the project, re-building it several times, but it's all the same.
somebody know what may cause this delays?
|
|
|
|
|
Does 'intermediate files' include the .opt and .ncb files?
The BP info is in the former, and a corrupt NCB can slow down a project load
Steve S
Developer for hire
|
|
|
|
|
thanks, this fixed the problem, but in EVC, these files were:
*.vcb<br />
*.vcc<br />
*.vco
|
|
|
|
|
Hi, I have a problem with my computer running windows xp pro. It has a problem since yesterday, while windows run around 5 minute since its logon, my computer start to run slowly. I can notify that the mouse pointer could not run smoothly. When I check at the task manager, I found that the CPU usage use 99%. But when i keep my computer around 5 more minute, it become normal. But when i start to move my mouse point it become slow and the CPU start to consume 99% again. I don't why cause it happend like that. Does any one has any comment to solve this problem? Are there any way to check which file or service that could consume CPU alot of resource?
|
|
|
|
|
Open the task manager and see what kind of process is running with 99% from CPU.
Then enter the process name in google.com.
|
|
|
|
|
I already see the CPU usage and check the process that consume the CPU resource. But I didn't found any process that cause the problem. How should I do? do you have any comment?
Note: when I start my computer in safe mode, it don't have a problem like that.
|
|
|
|
|
Now I already setup a new windows on the same drive. But i didn't format it. I use the second operating system to explorer to its drive and delete the system folder only. After i install the nw windows, my computer still have a problem while it is process. Now I suspect to the page file. I have check the root drive and found that the page file consume around 600MB and hibernate file consume around 400MB. So these two file consume around 1GB. Do you have any idea?
|
|
|
|
|
Try using this one : www.sisoftware.net
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
