WPF Discussion Boards

SledgeHammer018-Apr-13 18:44

8-Apr-13 18:44

I can't help but think "you're doing it wrong" if you are calling into a WCF service 15 - 20 times at start up to "load static data". Can you wrap it all into a single call? If you are using SOAP, you are sending a lot of useless crap back and forth. If you need data from calls 1,2,6 and 8 to do calls 13 - 27, you should still probably try to encapsulate it all into a single call into the WCF service to cut down on the data (speed it up). If you only have .NET clients, you can optimize it further by switching to NetTCPBinding and get rid of SOAP. If you need to support non .NET clients as well, I'd suggest REST / Json.

How much data are we talking? How often does this "static" data change? If its a lot of data and it doesn't change too frequently, I'd recommend implementing a timestamp / version scheme. Instead of calling 15 - 20 times into the service, you'd do something like "I have version 1.04 of the data. Is there a newer version?" If so, then download it and cache it locally.

Mycroft Holmes8-Apr-13 19:12

8-Apr-13 19:12

Static data is tiny, usually less than 100 rows per table/call. We are only .net, oh wait they are looking at mobile stuff as well and json is useful there.

I have not considered changing the binding, speed is not really an issue, I keep data small and we are all inside the firewall. I had not considered passing multiple collections or complex objects as it is not supported by basic binding (I think).

I certainly would not consider the versioning, just like I don't want to deal with caching as the size and speed is not really a problem.

I think I need to look into passing multiple tables and complex objects, one of the seniors devs is in my ear about doing that so I'll drop the problem on him Big Grin | :-D

Never underestimate the power of human stupidity
RAH

SledgeHammer018-Apr-13 19:15

8-Apr-13 19:15

Oh. I thought speed was your issue. I believe you can pass any serializable type. If you data is loaded by the time the view comes up, whats the issue? Smile | :)

Mycroft Holmes8-Apr-13 19:27

8-Apr-13 19:27

SledgeHammer01 wrote:
If you data is loaded by the time the view comes up

Well the busyindicator is in heavy use but the delay is generally 1-2 seconds even on the most complex views.

It was more of a philosophical question on design of the asynch/synch process. It seems ludicrous to have an asynch system and then chain the data calls. I think it is left over from when my DAL was single threaded Blush | :O

and I was getting locking issues on the data reader.

Never underestimate the power of human stupidity
RAH

Abhinav S8-Apr-13 23:23

Abhinav S

8-Apr-13 23:23

Mycroft Holmes wrote:
My question is whether it would be better to send the calls asych and each callback set a flag and tries to load the view which then checks a bunch of flags to see if the data load is completed.

Have each view calls its own service whenever the view is loaded.
This way, you don't do 20 calls at the same time.

WP Apps - Color Search | Arctic | XKCD | Sound Meter | Speed Dial

Mycroft Holmes9-Apr-13 2:44

How to Set ItemSource of Autocomplete Textbox when placed inside Datagrid and that datagrid having multiple rows???

9-Apr-13 2:44

Wat - I am talking about 1 view and a number of static tables! Of course each view has its own VM that does the calls to the WCF!

Never underestimate the power of human stupidity
RAH

Shwetank1237-Apr-13 20:00

Re: How to Set ItemSource of Autocomplete Textbox when placed inside Datagrid and that datagrid having multiple rows???

7-Apr-13 20:00

Hi,

I am new to SilverLight, I have created one test Application having Datagrid and Autocomplete Text box which is placed inside the datagrid,Now if the there is only one row i am able to set itemsource of the Autocomplete text box but for multiple rows how to find the control and set the itemsource?

Please help...

Thanks & Best Regards

Shwetank

modified 8-Apr-13 2:18am.

Naz_Firdouse7-Apr-13 21:18

Naz_Firdouse

7-Apr-13 21:18

Please check this tutorial...
http://www.c-sharpcorner.com/UploadFile/dpatra/auto-complete-in-datagrid-cell-editing-in-silverlight-3-application/[^]
hope it helps...

Re: How to Set ItemSource of Autocomplete Textbox when placed inside Datagrid and that datagrid having multiple rows???

Shwetank1237-Apr-13 21:27

Re: How to Set ItemSource of Autocomplete Textbox when placed inside Datagrid and that datagrid having multiple rows???

7-Apr-13 21:27

Hi,

Thanks for the reply, I have already visited the link mentioned, the thing is in that i am using WCF service to get the data from database and i have placed Autocomplete textbox Control inside the datagrid for one row i am able to find the control and add the itemsource but if there are multiple rows then how do i do that?

Thanks & Best Regards

Shwetank

Naz_Firdouse7-Apr-13 21:58

Naz_Firdouse

7-Apr-13 21:58

It can be done in two ways...
if the data to be binded to AutoComplete textbox is large, bind that collection to Autocomplete box by setting the datacontext to parent element of datagrid or first control in the page(we usually use grid as the main content holder) where that datacontext holds the Autocomplete collection and bind it to AutoCompleteBox.
Here in this sample, they are binding some static resource. you can replace it with your collection and it gets binded.(Same collection gets binded to all AutoCompleteBox).

CSS

<input:AutoCompleteBox

                                    HorizontalAlignment="Left"

                                    Width="180"

                                    IsTabStop="True"

                                    Text="{Binding UserName, Mode=TwoWay}"

                                    ItemsSource="{StaticResource SampleHeroes}"

                                    />

another solution is if you want different collection to be binded, you can add one more property to Users class (in this sample) which holds the collection and you can bind it directly inside AutoCompleteBox....
e.g
new Users{ UserName="Hiro Nakamura", Age=24, Gender="M", Country="Japan", AutoCompleteList = new List<string>{"Hi","Hello","Welcome","Bye" } }

But it does not seems to be good...
you can use the first approach.

Re: How to Set ItemSource of Autocomplete Textbox when placed inside Datagrid and that datagrid having multiple rows???

Shwetank1237-Apr-13 22:23

Re: How to Set ItemSource of Autocomplete Textbox when placed inside Datagrid and that datagrid having multiple rows???

7-Apr-13 22:23

Hi,

I tried using '' Tag but not getting....

Please find below the code i have tried...
<sdk:datagridtemplatecolumn header="Destination">
<sdk:datagridtemplatecolumn.celltemplate>
<datatemplate>
<sdk:autocompletebox height="25" name="aceDestination" verticalalignment="Top" width="175">

Naz_Firdouse7-Apr-13 23:20

Naz_Firdouse

7-Apr-13 23:20

it depends on the references you are using...
you arealready using AutoCompleteBox in your app.so use the same but instead relpce its itemsource with a property name

Re: How to Set ItemSource of Autocomplete Textbox when placed inside Datagrid and that datagrid having multiple rows???

Shwetank1237-Apr-13 23:25

File drag and drop in in-browser app

7-Apr-13 23:25

Hi,

Could you please share sample code that would really help me a lot.

and one more doubt: to get the city list there is one function written in .svc class, it is returning Generic List so how to convert that to objectCollection...

Thanks & Best Regards

Shwetank

CCB20106-Apr-13 3:26

CCB2010

6-Apr-13 3:26

I have an SL 5 app that the user can drop files and directories into.
When launched from the debugger, it works as expected.
When I try to use the xap in a page on a remote site, I get a Security exception.

foreach (FileInfo fi in files)
{
// _files.Enqueue(fi);
if (fi.Attributes == FileAttributes.Directory)
Attaching the debugger to the browser, I see:

+fi.Attributes 'fi.Attributes' threw an exception of type 'System.Security.SecurityException' System.IO.FileAttributes {System.Security.SecurityException}
"File operation not permitted. Access to path '' is denied."

UPDATE: Some properties of the FileInfo object are available, but not things like Attributes, Directory, DirectoryName.

1) Why does it work when started from the debugger?
2) How can I get it working outside of the debugger?

Thanks for any insight....

modified 8-Apr-13 10:14am.

Re: File drag and drop in in-browser app

CCB20108-Apr-13 10:35

CCB2010

8-Apr-13 10:35

The OP contains the exception I see when attaching the debugger to the browser.
Certain properties of the FileInfo appear to be unavailble -- Attributes, Directory, DirectoryName -- when running outside of the browser.

Re: File drag and drop in in-browser app

SledgeHammer018-Apr-13 11:19

Re: File drag and drop in in-browser app

8-Apr-13 11:19

As Colin mentioned (sort of Smile | :)

), this is Silverlight. It runs in a locked down sandbox environment and does not have access to local resources (files, registry, etc.). If you want to have access to those types of things, you need to specify that you want elevated permisions in your config file.

CCB201010-Apr-13 2:55

CCB2010

10-Apr-13 2:55

Thanks for the reply.
A hint on how to specify the elevated permissions would be appreciated...

(Weird: when I build and run the project -- from the debugger -- on a different computer, the app does not have elevated permission. Trying to figure out the difference between the two computers.
I have this code in a handler for the MainPage Loaded event:

Msgs.Text = string.Format("{0} ElevatedPermissions", (Application.Current.HasElevatedPermissions ? "Has" : "Does NOT have"));

)

Return key passed to a user control

Mycroft Holmes2-Apr-13 14:44

Re: Return key passed to a user control - solved

2-Apr-13 14:44

My google foo is failing.

I have a treeview with a HierarchicalDataTemplate made up of a user control, in the UC I have a textbox where acceptreturn=true. When the user presses enter while editing the textbox the treeview grabs the enter key event.

How can I force the enter key press event down to the textbox?

Never underestimate the power of human stupidity
RAH

Mycroft Holmes2-Apr-13 14:57

2-Apr-13 14:57

Idiot - e.handled = false on the keydown event D'Oh! | :doh:

private void EnterDown(object sender, KeyEventArgs e)
{
    if (e.Key == Key.Enter)
    {
        e.Handled = false;
    }
}

Never underestimate the power of human stupidity
RAH

Mycroft Holmes2-Apr-13 15:16

2-Apr-13 15:16

The enter key only passes to the UC when there are no child nodes Mad | :mad:

Using the Telerik grid so I will go annoy them b/c I think it is control specific!

Never underestimate the power of human stupidity
RAH

SledgeHammer013-Apr-13 7:58

3-Apr-13 7:58

The tree view is kinda weird in that some messages get funneled up the parent nodes until it reaches the root. Some other messages are eaten by the parent nodes. Have you tried using the preview events? You can usually get those consistently... except when you can't.

Mycroft Holmes3-Apr-13 12:37

3-Apr-13 12:37

SledgeHammer01 wrote:
except when you can't

Your reply instils me such confidence! I dumped it into the telerik forum, they tend to give pretty good support if a little slow lately.

Never underestimate the power of human stupidity
RAH

SledgeHammer013-Apr-13 12:43

WPF performance on Windows XP

3-Apr-13 12:43

Haha... probably more of a treeview control issue since its weird with the keyboard. That's why I said what I did. Some keys work one way and other keys work a different way.

Vasudevan Deepak Kumar2-Apr-13 10:46

Vasudevan Deepak Kumar

2-Apr-13 10:46

Are there known issues with WPF GDI with Windows XP? I have a bunch of observations of a legacy WPF application that we have only on XP but works fine with Weven and others.

Vasudevan Deepak Kumar
Personal Homepage
Tech Gossips

The woods are lovely, dark and deep,
But I have promises to keep,
And miles to go before I sleep,
And miles to go before I sleep!

Re: WPF performance on Windows XP

SledgeHammer012-Apr-13 11:39