|
Member 12949046 wrote: interviewer are provide task
We'll gladly help but we won't do it all for you. So, ask a question. Where are you stuck?
There are two kinds of people in the world: those who can extrapolate from incomplete data.
There are only 10 types of people in the world, those who understand binary and those who don't.
|
|
|
|
|
When developing a website under ASP.NET 2013, it was possible to open a "mobile phone" from one of the pulldowns to see what the new website would look like in a variety of phone types. I think that was available from a phone SDK that I had installed.
I have been searching for something similar for ASP.NET 2015 but without success. Does anyone know if something similar exists?
|
|
|
|
|
|
Sorry it has taken so long to get back to you but it has been a very busy couple of weeks with the Bowls Club AGM to prepare for. Anyway, thanks for your reply.
I have followed up your link without any success. The only option, Windows Phone SDK Downloads, seems to lead to an old page. However the Downloads tab on that page suggests that VS 2015 Update 3 already contains Win10 Mobile emulators. I have that installed, so all I need to do is find the emulator.
Thanks again for you help.
|
|
|
|
|
I'm kind of new to MVC (been programming for about 6 months), I'm looking for some help trying to learn standard coding in mvc, I already have my model and classes separate in another project but what I'm looking for is things like exception handling, standard view messages for example I have a class called returnMessage and through this I send anything I want back to my view (in ViewBag) and display it there, so if you could guide me thought or give me some articles to read that would be fantastic.
Regards, Mr.K
|
|
|
|
|
|
My advice would be to get a book on MVC and just go through it. The ViewBag is ok, it "works" but it's not really best practice, you'll want to use models to pass data to your views as they are strongly typed and can contain the logic they need. Obviously no-one can explain all of the issues and standards to do you in a forum post which is why it's best to get a book on MVC as that should take you through everything you need to know.
|
|
|
|
|
You may check coding guidelines rather than standards that will help you learn and make feasible application
highlighted points are as below
- DO separate the model its own project with a distinct assembly
- DO put all business logic in the model.
- DO put all validation logic in the model
- DO define interfaces for data access
- DO put all session logic in the model
- DO put HTML in Views and Partial Views (not in a controller).
More you can get on This link[^]
Find More .Net development tips at : .NET Tips
The only reason people get lost in thought is because it's unfamiliar territory.
|
|
|
|
|
Hi Guys,
I am getting the below errors frequently whenever any deployment or after 40 minutes I am getting the below error only in UAT environment. But not in Production Environment . All codes are same in UAT and Prod.
Please suggest any solution
Could not load file or assembly 'vjscor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.FileNotFoundException: Could not load file or assembly 'vjscor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' or one of its dependencies. The system cannot find the file specified.
Source Error:
Line 38:
Line 39:
Line 40: <asp:toolkitscriptmanager id="ToolkitScriptManager1" runat="server">
Line 41:
Line 42:
Source File: D:\Projects\AEDDO\login.aspx Line: 40
Assembly Load Trace: The following information can be helpful to determine why the assembly 'vjscor, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a' could not be loaded.
WRN: Assembly binding logging is turned OFF.
To enable assembly bind failure logging, set the registry value [HKLM\Software\Microsoft\Fusion!EnableLog] (DWORD) to 1.
Note: There is some performance penalty associated with assembly bind failure logging.
To turn this feature off, remove the registry value [HKLM\Software\Microsoft\Fusion!EnableLog].
|
|
|
|
|
deepak26123 wrote: Please suggest any solution
The solution is to investigate why the system cannot find that file.
|
|
|
|
|
There is no file in with this name in PROD also but PROD is not throwing any error
and Also error will be gone if you refresh the page
|
|
|
|
|
Sounds like the working server has the Visual J# redistributable installed, and the non-working server doesn't.
Try installing the relevant v2 package from Visual J# Home[^].
Alternatively, try upgrading to the most recent version of the AJAX Control Toolkit[^], which shouldn't have any dependency on Visual J#.
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
I need to enable my admin user to change access permissions for users on the fly, such that they can create new Roles and add permissions to those Roles and assign that role to any user at run time.
I don't want to 'set' the roles during development, as in [Authorize(Roles="Role1, Role2")] etc because after development if i add roles to any user then again i have to recompile the code and copy the changed dll to project bin folder.
we often hard code the role name with authorized attribute but what if i need to do this kind of association at run time in asp.net mvc project. is it possible please discuss all your thought.
i have seen your have good control on role base access system development. so please guide me how can i add roles to action or controller at run time.if possible please discuss this topic with sample code.
thanks
tbhattacharjee
|
|
|
|
|
Tridip Bhattacharjee wrote: if possible please discuss this topic with sample code.
A quick google would get you recent discussions with sample code.
Attributes are compiled, and you can't add one without recompiling. The idea is to define "roles" for certain tasks, and assign a user to that role if he/she is allowed to do so.
Not to add/remove roles as users are removed/added.
Bastard Programmer from Hell 
If you can't read my code, try converting it here[^]
|
|
|
|
|
sorry not clear. can u plzz redirect me to few right article on the same topic because in code i do not want to hard code roles name with action method in asp.net mvc.
tbhattacharjee
|
|
|
|
|
Tridip Bhattacharjee wrote: can u plzz redirect me to few right article on the same topic
Understanding Role Management[^]
Introduction to Membership[^]
Tridip Bhattacharjee wrote: because in code i do not want to hard code roles name with action method
So, one day the action method is executed by role 1, and the next day by role 2?
That's how it works; you assign "admin" to the action method, and assign a user to that role if he/she is allowed to execute. You do not change the role.
Bastard Programmer from Hell
If you can't read my code, try converting it here[^]
|
|
|
|
|
hello how to put multiple entries from different pages to the same gridview table.
|
|
|
|
|
For this, either you will need to store those entries to localStorage db, otherwise have a database working that will store the data entered on those 2 pages.
Then load that data from database, to show on a single page within GridView table. If you are having some sort of storing mechanism, consider sharing so that I can guide you specific for that — Session, localStorage, SqlConnection... What?
The sh*t I complain about
It's like there ain't a cloud in the sky and it's raining out - Eminem
~! Firewall !~
|
|
|
|
|
Hello, I am storing data in database. Program is like x1 is asking for some info. X2 and X3 has to provide those info. database has table in which approx 20 columns are present. 5 columns are used by x1. x2 and x3 have to access rest column. three pages for x1,x2 and x3 has been created to access same table.For X1 this is insert command and for x2 and x3 update command has been used as per selected row to fill the entry.even if i use labels to get the entry of X2 while putting entries by x3 through text box and try to add both entries,this is not working. when x2 enters in same cell entry of x3 gets erased and vice versa.
this is whole problem .
please guide
|
|
|
|
|
Member 12935730 wrote: when x2 enters in same cell entry of x3 gets erased and vice versa.
Of course it does, because you are using UPDATE query. That query will simply ignore the previous data and overwrite it with the newer data.
Can you show the table structure, or the code being used? In any circumstances, you will have to rewrite the query to remove the updation of columns by x3 that x2 has to write. So in this case, all 3 of these x will have a different column to write in, x1 will create a new record, x2 will enter details in a few, and x3 will enter the data to a few.
If you do not want to modify your SQL queries, then chances are you will have to write a lot of validations — such as checking if data exists, and executing if data IS NOT NULL etc. That will just make things over confusing as well as complex.
The sh*t I complain about
It's like there ain't a cloud in the sky and it's raining out - Eminem
~! Firewall !~
|
|
|
|
|
i have few questions about MCSD and MCPD exam.
1) what is difference between MCSD and MCPD ?
2) i have 10 years exp in dotnet platform. so tell me should i go for MCSD or MCPD ?
3) i heard from people who passed MCPD and they said if i do not get right brain dumps for MCSD or MCPD examp then it will be hard to pass those exam.......is it true. so my request if some one who passed recently MCSD or MCPD then please share your information for how one should prepare oneself for MCSD or MCPD examp.
4) how many questions comes in MCSD or MCPD exam and what is the duration for MCSD or MCPD exam ?
5) how do i know that MCSD or MCPD examp will take for which dotnet version and what is the syllabus for the exam ?
from where to download MCSD related brain dumps which help me to pass the exam.
please some one answer me point wise in detail for better clarity.
tbhattacharjee
|
|
|
|
|
Tridip Bhattacharjee wrote: i have 10 years exp
And still not figured out how to use Google? There are a number websites devoted to the MC exams, including those managed by Microsoft.
|
|
|
|
|
Take a peek! This is my controller:
public ActionResult SaveInfo(GetOrderDetail_Result items) //This method will call a stored proc to pass parameters
{
var hold = items.Master_OrderNum;
//cb.SaveAgentViewInfo(master_OrderNum);
return View(Index());
}
When I pass the model to the Action method none of the properties are initialized from the view page.
The master_OrderNumnumber comes through as a null.
I'm calling this in my View:
document.location = '@Url.Action("SaveInfo", "ControllerName", new { Model })';
I actually use a foreach(var item in Model) to print certain things to divs on the cshtml page and all that works perfectly. But after passing that same model everything is blank inside in the controller. I don't know what side it should be initialized on. I'm new to MVC!
Help!!
|
|
|
|
|
Never mind ... I figured it out
|
|
|
|
|
I have created an ASP.NET Core website which will be a template for future web sites. I have removed Bootstrap and included W3.CSS instead, which I find easier to use and just as rich in function as Bootstrap. I have also included npm, gulp and bower and seeded them with the tools I use. I have this saved in a directory.
My problem now is that if I create a new website, I cannot find any way to include this template as the starter set. Conversely, if I open my template, I cannot find any way to save it under a new name in another directory. Every option seems to involve overwriting the template. Does anyone have any suggestions?
I know someone will say that this is easy, so in my defence, I am pleading old age and stupidity in advance.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
