|
I have found this to happen when the VPN connection is set to use the default gateway on the remote network - ie. you internet access is adjusted to connect through the internet at the remote network, not your own.
To prevent your gateway from changing, go into the properties of the VPN connection, on the networking tab, goto the TCP/IP properties and into the advanced settings to deselect 'Use default gateway on remote network'. This option is selected by default as well, so it has to be switched off by the user.
------------------------
Luke Lovegrove
------------------------
|
|
|
|
|
Hi Friends,
I have a system which has installed windows server 2003 OS. In my system, IIS6.0 is installed also. I could not run my asp.net applications through the visual studio 2005. Because, "Default Website" (in IIS6.0) is display always stopped. I could not trying to start the default website. I was trying to start the default website when it has returned the error "The process cannot access the file because it is being used by another process". I did to restart the IIS admin service by more time.
How can i start the default website in IIS6.0?
Thanks in advance
Rameshkumar Thirumalaisamy
|
|
|
|
|
|
I have no need for Exchange on my home server and I'm wondering what is the safest way to remove it. My experience with SBS is almost entirely bad, and it's always been incredibly unstable, so I'm leery of uninstalling Exchange. I can't afford the several months it takes to rebuild a currupted server. I think there are two options - remove it through the Windows Add/Remove Programs panel, or use Services to change all Exchange services to manual start. Perhaps there's a third alternative I haven't thought of...
Has anyone tried this? Which is safest?
"A Journey of a Thousand Rest Stops Begins with a Single Movement"
|
|
|
|
|
Unless you know why your server is unstable, I would go by the second alternative.
Which version of SBS is it?
|
|
|
|
|
It's SBS 2003 Premium, and it's not currently unstable - just really slow. The previous versions I used all self-destructed from making even minor changes, especially those changes directed step-by-step by Microsoft. I just don't trust it.
"A Journey of a Thousand Rest Stops Begins with a Single Movement"
|
|
|
|
|
How much memory do you have on the server? You really need four GB on a Premium.
If you have 4 GB already, you might need some memory tuning[^]
Just remember that the SBS is also a Domain Controller so leave some memory for the AD
|
|
|
|
|
Jörgen Andersson wrote: four GB on a Premium.
If you have 4 GB already, you might need some memory tuning[^]
Holy Crap! When I built this thing I upgraded way beyond the norm - 1 GB - never imagining any version of Windows would want more. Maybe I should uninstall everything and go back to DOS.
"A Journey of a Thousand Rest Stops Begins with a Single Movement"
|
|
|
|
|
The exchange server have a tendency to consume all available memory up to a little less then 2GB during the nightly onlinedefrag and cleanup. This memory will only be released on demand with a lot of disk swapping as a result .
2 GB can therefore be considered a to be a practical minimum on the standard server. A Premium wants more
If you don't need the exchange server you can safely just set all exchange services on manual start. The only things you affect that way is the wizards that you anyway only run while installing the server.
|
|
|
|
|
|
Hmmm. Thanks for the link, and I may give it a try, but it's still scary. Microsoft always forgets some little detail, like "Following our instructions will probably destroy your PC, but you'll be offline so long rebuilding it that we'll never have to worry about hearing from you again." Still, I really can't think of anything that could be dependent on the Exchange system, since I've never implemented it fully. SBS is weird, though. They've bastardized the standard Win2003 so that certain assumptions are strictly enforced, and one or more of those invariably jumps up and bites me if I try to do anything outside of the defaults set by MS.
Thanks again!
"A Journey of a Thousand Rest Stops Begins with a Single Movement"
|
|
|
|
|
Hi All,
is there a way to zip a directory in windows through command prompt. Please help urgent.
thanks in advance.
- rajnish
|
|
|
|
|
Not without a third party program.
Try rar, the commandlineversion is for free.
|
|
|
|
|
|
While this doesn't specifically operate from the command line, I found this procedure to compress a file or folder in the Windows Help system.
***
To compress a file or folder on an NTFS drive
Open My Computer.
Double-click a drive or folder.
Right-click the file or folder you want to compress, and then click Properties.
On the General tab, click Advanced.
Select the Compress contents to save disk space check box, and then click OK.
In the Properties dialog box, click OK.
In Confirm Attribute Changes, select the option you want.
Notes
To open My Computer, click Start, and then click My Computer.
You can only use NTFS compression for files and folders on drives formatted as NTFS. If the Advanced button does not appear, the file or folder you selected is not on an NTFS drive.
If you move or copy a file into a compressed folder, it is compressed automatically. If you move a file from a different NTFS drive into a compressed folder, it is also compressed. However, if you move a file from the same NTFS drive into a compressed folder, the file retains its original state, either compressed or uncompressed.
Files and folders that are compressed using NTFS compression cannot be encrypted.
You can choose to display NTFS-compressed files in a different color.
***
If I was doing this, I'd compress a large folder with the Task Manager open, and see what program suddenly appears in the list of running tasks, then I'd locate that program and try typing path\programname /? at a command prompt to see what command line parameters it has, if any. Most functions are implemented as stand alone programs somewhere in the Windows system, but they're often undocumented. Once you know the name of the program, you might also find additional information on using it by searching the web, or TechNet.
"A Journey of a Thousand Rest Stops Begins with a Single Movement"
|
|
|
|
|
Try the command compact /?
|
|
|
|
|
Dear all,
I wana get the HP Pavilion DV 6663, but the operating system is Vista buissness. while my quest is to get it with XP Pro. SP2, wat i will do is to get rid of the vista and install the XP.
My question is: Is the DV 6663 support the XP Pro., concerning drivers?
Best regards.
|
|
|
|
|
Yes[^] for HP Pavilion dv6663ca Notebook PC.
|
|
|
|
|
Device a simple shell with the following valid commands:
1. help
a. lists the names of currently available commands
2. add
a. takes 2 command line arguments corresponding to the two input values
3. subtract
a. takes 2 command line arguments corresponding to the two input values
4. multiply
a. takes 2 command line arguments corresponding to the two input values
b. overflows will be truncated
5. divide
a. takes 2 command line arguments corresponding to the two input values
b. this performs only integer division
c. division attempt by zero returns zero.
6. setlog
a. takes one argument indicating the name of the log file [default: q1.log]
7. start
a. starts the logging process to the logfile mentioned above
8. stop
a. stops logging process
9. quit
a. exits out of shell
10. back
a. Usage: back
b. Executes the cmd in back ground and holds the child from exiting till explicitly
mentioned by fetch command
c. Internally, back returns the child id of the process created .
11. fetch
a. Usage: fetch
b. childid is the id of the process to be fetched. This will print the result of the
operation performed by child
c. if no childid is given, any of the background children will be fetched.
12. ps
a. list the set of child processes with their process id and the name of the child.
Apart from these set commands, if any other command is typed, then a “Command not found”
error should be printed by your program on to the screen.
All the results from the child processes has to be send to shell process using shared memory
defined on a per-child basis.
If a process has been send to background using the back command, then it must stop itself from
sending the result back to shell. Only when the user types the fetch command, the child must
return the result to the shell.
Every 30 secs, the shell must display the currently running child processes on to the screen. (This
information should not be printed to the log file.)
From the time the start command is given, all the commands typed in the shell, and its results
must be written on to the log files, unless otherwise specified. Commands 1,6,7,8,9 and 12
should not be written to the log file, neither should their results be written.
|
|
|
|
|
Hi,
We are trying to transmit video within intranet.
Setup:
Windows XP PC having the WME and the Webcam.
Windows 2003 Enterprise Edition Server with WMS.
We performed configuration as mentioned in couple of websites pertaining to Multicast steaming.
On WMS we configured the Publishing point which points to the XP PC which is used to capture the live video and audio. (http://internalIpAddress:8080/publishingpointname). After the creation we started the publishing point service.
Next we started the encoding using the WME wizard. There we selected the Multicast streaming option using PUSH. Provided the link to the WMS server (http://InternalWMServerIp:8080).
But we end up getting the following error: "The specified push template is invalid.(0xC00D151A)"
Since we are setting this up in intranet, we believe that firewall/router will not come in for consideration. Is our assumption correct?
For the above two configuration/setup, will the internal IP address do good or do we need to have the 239.XXX.XXX.XXX series.
We tried with PULL and Unicast. This works fine, since the PC transmitting the video will not use the WMS for transmission.
Can someone help us on step-by-step guide to achieve the same with example and the fix for the error being encountered. Couple of important troubleshooting tips will also be of great help.
TIA
|
|
|
|
|
Hi,
Do you know locking/unlocking capability of your hard disk? If not, read following.
Every hard disk has inbuilt controller, called ATA controller. ATA stands for Advanced Technology Attachment or AT Attachement. ATA is the standard protocol to interact with the hard disk. ATA protocol has several commands using which hard disk can be locked or unlocked.
This lock is the hardware lock. Once hard disk is locked, you can't read/write from your hard disk, until unlocked. Once it is locked, all commands to hard disk will be aborted, except commands for unlocking and some special commands.
Almost all modern hard disk support security feature. By default security feature is disabled. It needs to be enabled and then only hard disk can be locked/unlocked. Some older hard disk might not support this feature.
I have created a utility, completely coded 'C' language, to lock/unlock hard disk.
For more details and downloading this utility, visit Lock-Unlock Hard Disk[^]
Thanks,
Sandeep B. Vaniya
|
|
|
|
|
Hi.
I'm new to WMI, nd I'm trying to create an application that pings a computer and get the following information:
- IP adress
- Domain
- UserName
- Time since last boot
- Memory
- CPU
- OS Version
- Service pack version
- Current pingtime (datetime.now).
I'm using both the registry and WMI to get the needed information, but I would like to know if anyone could help me writing - or guide me to create a WMI call that would get all that information?
I'm selecting the host from a database, and the data is afterword stored in the same table.
Also, if I could get some help reading an OU in a Domain to list all hosts - I know the path to the ou, but not how to read data fromm it.
Regards Jan.
|
|
|
|
|
|
GET OS INFORMATION
you have to use ManagementClass to access system details
<br />
System.Management.ManagementClass managementClass = new System.Management.ManagementClass("Win32_OperatingSystem");<br />
<br />
foreach (System.Management.ManagementObject managementObject in managementClass.GetInstances())<br />
{<br />
<br />
str1 = managementObject["Manufacturer"].ToString();<br />
str2 = managementObject["Version"].ToString();<br />
str3 = managementObject["Caption"].ToString();<br />
<br />
}<br />
|
|
|
|
|
Jan,
I think this will help out a lot. It helped me, because sometimes WMI can be a nightmare...
WMI Code Creator v1.0[^]
-David
|
|
|
|