|
Hi, My computer is running windows server 2003. After I log on to windows, its display the message box Missing Hardware ID. Then the system is shut down immediately like no electricity. I don't know what is the cause of the problem. Can anyone give me any suggestion to solve this problem? Thank in advance
|
|
|
|
|
How to install the microsoft's Visual C++ Runtime 8.0 in XPE? Microsoft has been published vcredist_x86.exe for installing the runtime, but in my XPE image there is no support for the Windows installer, and i have some difficulties to adding one.
so i am looking for an alternative way to install the VC8 runtime in XPE. like copying the files and manifests and making the registry entries, anybody here faced the same issue???
Any help will be appreciated.
Never Work Hard! - Work Smart!!!
www.indianITforum.com
|
|
|
|
|
I tried installing Fedora 8 on a pentium III machine but was never successful. Can somebody tell me what might have cause this problem. Thanks in advance.
|
|
|
|
|
Kofi Ambrose wrote: I tried installing Fedora 8 on a pentium III machine but was never successful. Can somebody tell me what might have cause this problem.
No.
You didn't give any information that could help in solving the problem. Read this document: http://www.catb.org/~esr/faqs/smart-questions.html[^]
|
|
|
|
|
The problem is that, the installation process would start alright but gets stuck on the way (about half way through),that is, in the course of copying files, and eventually fails.
|
|
|
|
|
Have you set the memory requirements as per the instructions on the fedora manual? The swap, boot requirements, root...etc
---------------------------
Both optimists and pessimists are important in technology. The optimist invented the aeroplane; the pessimist invented the parachute.
Regards,
Hesbon Ongira
Nairobi, Kenya.
|
|
|
|
|
Kofi Ambrose wrote: Can somebody tell me what might have cause this problem
How can we with the crap information you gave? No particular error message or anything like that, leaves it to being anyone's guess.
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
Hi all,
I have purchased a new Desktop with 320GB SATA 3.0 Gb/s Hard Drive with Native Command Queuing. I would like to know can i install window2000 into this desktop?
regards
cocoonwls
|
|
|
|
|
Why wouldn't you be able to? It's just a hard drive. Otherwise I'm not sure what you are asking...
|
|
|
|
|
Hi,
If your question is related with installation of Windows 2000 only then you can go ahead and install it on SATA Hard Disk. There would not be an issue with that.
Hope this help
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
If the system is in ATA-compatible mode the SATA controller and disk look like regular IDE disks to the BIOS and to Windows. There are no problems with this.
However, to make use of features like Native Command Queueing, the new Advanced Controller Host Interface (AHCI) mode is required. If this mode is enabled, Windows needs a driver in order to be able to read the disk. (This is also true of SCSI disks and controllers, RAID controllers and any additional IDE controllers that aren't at the standard locations.) Also, if booting from that disk, it requires a copy of the driver named ntbootdd.sys in the same location as ntldr and boot.ini (typically the root of drive C). If the right driver to access the hard disk isn't available and the built-in support doesn't work, Windows will blue-screen with an INACCESSIBLE_BOOT_DEVICE code.
Windows 2000 and XP require a floppy disk to be made available at setup time to provide additional storage drivers. You have to press a key when prompted (F6, from memory) to tell Setup that you want to load additional drivers. Some new systems - which generally don't come with floppy drives - can pretend that a USB memory key is a floppy drive for this purpose.
I'd stick with ATA-compatible mode unless you have good reason to select AHCI mode. AHCI may not even be an option in your BIOS setup - my Dell system doesn't allow it to be selected.
DoEvents: Generating unexpected recursion since 1991
|
|
|
|
|
Hi all,
Thanks for reply to my question.Thanks.But here i have another question after i install win2000.Actually the desktop which i purchased is come together with winXP and driver.So, are the driver will compatible with the win2000? Because i am heard from my freind said that, some driver are not support win2000.
Any help are welcome.Thank you
Note: My computer is Dell vostro desktop.
regards
cocoonwls
|
|
|
|
|
You could do a check on the Dell site to see if there are drivers for your specific model.
|
|
|
|
|
Hi, I have a problem with my machine running windows server 2003. I forget that what I make change to the system. The problem is when I log on to my system as an administrator, its display the message box Missing hardware ID. After that, the system shutdown like power is disconnected. I don't know what is the cause of the problem. Because the electricity is not disconnect. I start the system again and try to view an event veiwer and found it's stated that "Unexpected shutdown". Then the system shutdown as I mention above.
Then I try to reinstall windows 2003 again. I pass the text mode, partition, format... but I get stuck when it display the screen about installing device driver. When the time decrease to 34 min, the screen stop responding and the hard disk is not running. I don't know what is the cause of the problem. Could anyone suggest me any point that I could check to solve the problem?
Thank in advance.
|
|
|
|
|
Hello everyone,
I'm trying to change the idle timeout of a new RDP session when it's at the login screen. There is tons of documentation on idle timeouts for an active session, but this is not the same thing.
When you open a remote desktop client, and enter the terminal server address of your choice (w/o credentials) and hit connect. It of course prompts you for your credentials at this point. For several reasons I need to keep this screen open indefinitely instead of disconnecting after 20seconds or so.
I have noticed that it's different by default on different Microsoft OSes. Some are 20s, 30s, 2min. I've been trawling the the registry and MSDN all day today and still cannot find anything about this.
Does anyone know anything about this or if it's even possible?
Thanks!
// Steve McLenithan
|
|
|
|
|
After further research, it appears this is not any sort of registry entry. You need to customize GINA and look at the WlxSetTimeout function.
|
|
|
|
|
http://pgina.org/
// Steve McLenithan
|
|
|
|
|
i have installed an application on pc, when i run this application the application is shown in task manager but does not run actually.this application is made in .Net and works well on other machines.
abrar
|
|
|
|
|
Can you more explain about it and did you write it ?
|
|
|
|
|
Suppose I have a Win XP SP2 machine and a Vista SP1 machine and that they're separated by the internet.
Is there an easy way to do folder sharing in this environment? i.e. something which would provide a logical drive on one machine which is hooked up to the other over internet connectivity only?
|
|
|
|
|
Theoretically, yes. Practically, no, because you'd need to own all boxes between the two machines.
You could, however, setup a VPN network, which is possible with free software, and thus make it appear that both machines share one local network. Shares will work normally then.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
Assuming you only want to share the folder while you're connected, Remote Desktop Connection can do file sharing. Click Options from the Remote Desktop Connection main window, then go to the Local Resources tab. At the bottom, click More, then under Drives, select the drives on your local computer you want to use on the remote computer.
DoEvents: Generating unexpected recursion since 1991
|
|
|
|
|
If you want something quick and easy. Try out Hamachi[^]. It's a zero-configuration VPN. Really slick, the basic free version does pretty much everything you might need. The premium version has some extra features that you may or may not need.
// Steve McLenithan
|
|
|
|
|
Yes it is possible to do this. You can map a drive directly across the internet provided the firewall is configured correctly. If you don't have a firewall running and both machines are plugged straight into the modem ...
It is unusual that I do anything like this, however if I need to do it I normally setup an access list that allows all IP traffic from one IP to the other. Obviously this is quite a bit easier if you have static IPs. If you have a PIX / ASA and need help with the access list just reply and I can give you an example.
|
|
|
|
|
I want to make my screen black and white and my OS is windows XP . Do you have any idea how it can be done ? Should I use a software ?!!!?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
