|
well yes I guess I will get every occuring of the string but I just tried and it didn't do it totally correct.
Example:
I do have the enumartion of the chapters.
Lets say they are 8, 8.1, 8.1.1, 8.2 and so on
If I do use instr() on them to search for "8" then it matches all of them! But I do not want 8.1, 8.1.1 and so on in this case.
What I want to do is a strict stringmatching. So like in your example if the last "ten" would look like "ten.twenty" then I would like to get the "ten" but ignore the ".twenty" afterwards.
So my search should parse through the paragraphs to find the string.
another example:
Let's say I do have these two paragraphs
If you want to know more about this product please have a look at clause 8.1.2.
To find the cheapest product in our shop please have a look at chapter 8.
So let's assume we do want to get the "8" but not the 8.1.2.
Instr() searches every occurence of "8" within a string. But in my example above there would be a hit in "8.1.2" aswell, which is not desired.
That's my problem. As you might have realized in the second paragraph, there is a dot and a linefead afterwards. So if I compared this string, after having split it in parts at the blanks, to "8" it would not match, because of the dot and linefead.
So what I am looking for is a solution to remove things like that, to get the hit, but not to influence the string matching in any other case, so e.g. if the "8" would have been somewere near the center of the paragraph, without anything behind.
Well, as I said in my last posting, I guess I will have to find a way using left() and right() to check what is behind the string, so to find out if it is 8.1.2 or 8. and linefeed.
But thanks anyway.
Stephan.
|
|
|
|
|
Hi,
In that case, use the String.ToCharArray to copy the text into a character array, then enumerate the characters looking for your target string. Then you can use the index to check the next <n> characters and determine whether you consider it a match or not.
It may take a little effort to get the loop logic correct, but so would using combinations of Left() and Right(). PLus I think it will run a lot faster than trying to do the same thing with left and right calls.
Good Luck,
Robert
|
|
|
|
|
Is this function available in VBA for Word? Because I can't find it there. And the editior just asks for the end of the command at the dot.
I guess this function is only available in .net but not in VBA.
Stephan.
|
|
|
|
|
I guess I could have done similar operations by using left() and right() parsing one character after the next one or copying it into an array, but well, I guess the result and the speed would be the same if not worse because of first copying it and afterwards parsing the array.
I did the following:
* I checked if the length of the searchstring is equal, then I found it
* I checked if the length of the searchstring is one smaller (or the string in the paragraph one bigger respectively). If so I take the last char (with right and length operations) and compare it to the non printable or to a dot (this will get the 8.1. or 8.1x where x is the linefeed or tab or ...)
* I checkd if the length of the searchstring is two smaller (or the string in the paragraph two bigger respectively). If so I once again take the last char to check, if it is a nonprintable. if it is, then I do have something like 8.1.x and not 8.1.2 e.g.
Except in the first case I do range.select the paragraph and have a look for this word, by using the comparestring. I just tried with a test document, and it worked with the testtext which is part of a bigger one. Well I know this might not be correct in every case but it matches most of these cases.
And besides I do parse every word in the paragraph, and if I find a possible match (using the InStr()) the operations above take place. To avoid parsing strings once again in the same paragraph, I marked those I already did the operations from above.
Well, I guess I will try the other solution (rebuild the tochararray operation and the comparing every char) as well to find out which of those has fewer errors or even none!
Thanks anyway!
Stephan.
|
|
|
|
|
I am trying to get label2 to divided evenly into label1. Numbers are being randomly placed into label1 and label2. I have written the following procedure but the numbers that are being placed in the label boxes are not dividing evenly. Below is my code. Any help is appreciated.
Sub fillnumdiv()
'Needed to make Do Until Loop work
lblNum1.Text = 3
lblNum2.Text = 2
Do
'Checks all of the conditions for the number to be placed in the label box for the first number.
Randomize()
lblNum1.Text = CInt(Int((145 * Rnd())))
Randomize()
lblNum2.Text = CInt(Int((145 * Rnd())))
Loop Until CDec(Int(lblNum1.Text) Mod Int(lblNum2.Text)) = 0 And
Int(lblNum2.Text) <> 0
End Sub
|
|
|
|
|
Why does this have the stench of homework around it?
Your constantly picking two random numbers and seeing if one divides evenly into the other. If it fails, you're picking two more, and so on, and so on... The chances of the RNG picking two number that divide evenly into each other are pretty low, so of course, it takes a long time to find two numbers that match your criteria.
I have no idea what your homework assignment is, but, how about picking a random number for one and then contantly trying random numbers to divide into it. In other words, pick a random number for label1, then in a do loop, keep picking random numbers until you find one that divides evenly into the first.
This will have the effect of trying to hit a stationary target, instead of a moving one.
There are other, much better ways of doing this, but, then again, it's your homework, isn't it?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
What you are saying makes more sense. Thanks. Really, it isn't a homework problem. I am doing a flashcard program for my daughter. She is learning how to add and subtract and I already have those done along with multiplication so I figured I would go ahead and put division in there. This is my first project. I am trying to teach myself how to use vb.net.
|
|
|
|
|
OK. If you want two numbers that are evenly divisible and do it quickly, generate two random numbers, put one of those numbers into one of the textbox's. Then, multiply the two numbers together and put the result in the other textbox. This will quickly give you two numbers that are evenly divisible.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
does anyone of you know how to get the length of a string array?
My code looks like this
<br />
mystring = ActiveDocument.Paragraphs(index)<br />
mydata = Split(mystring, " ")<br />
So in the beginning I do not know the size of the array. But I do need to know if the word I am searching for, is in this array. Therefor I have to parse the array to search it. But if I do not know the upper limit, this causes a "out of bounds" error. So I do need the upper limit to avoid the error to be thrown.
Could anyone please tell me how to get the length so I could do the following (in VBA!) ?
<br />
For i = 0 to upperlimit<br />
if mydata(i) = mysearchstring then<br />
do something<br />
end if<br />
Next
Thanks!
Stephan.
|
|
|
|
|
Try UBound(mydata,1)
An optimist's glass is half full.
A pesimist's glass is half empty.
An engineer goes and gets the right size glass.
|
|
|
|
|
thanks, it works!
Stephan.
|
|
|
|
|
There are at least 3 ways to do what you want:
1. As already mentioned, use ubound. ubound is a vb only feature and is convenient because it returns the upper bound of the array which is usefull for loops.
2. mydata.Length basically returns the count of array items. This available in any language of .net. It is less convenient for loops because you must subtract 1 from it.
3. For Each loop:
For Each str As String In MyData
'Do Something
Next
You don't have to know the array bounds to loop through the items.
|
|
|
|
|
I'm a novice at code writing (newbie is something my kids would call it) and need some advice.
I need to write some code that enables me to access and manipulate data from a database object. This code has to validate the data away from the database. I would personally like to use an object that has methods that read and write to the database and properties that manage validation. This would make life easier when using the properties or field values with other objects. The problem with business objects is the time it takes to create the object.
If I want to run a datagrid based on a collection of business objects it takes too long to create the object collection (for example sales orders). Linking the datagrid to a dataview and using a datatable to hold the values is far quicker. The business objects method appears to provide a better method of creating sales orders without access to the database using a localised copy of any necessary data (part codes, etc).
One other point, the database is provided by a third party and I'm writing an additional interface (this is allowed and part of the software contract) that provides additional facilities. So that the interface isn't restricted by hard coding I have created configuration files that identify table field names, label descriptions, table column headers, table widths, column orders and properties used to create a tab control interface such as top,left,width (for the placement of text boxes) and group properties (used to create different tab pages). I've done this because I'm just a little concerned that if I leave the company they won't be able to change any of the intferface.
I know I can't avoid hard coding validation but the data screens can be configured without hard coding. I currently use a tab deliminated file (so we can use commas in field names or sql commands) but will propbably change to xml as excel is rubbish for tab deliminated (places double quatation marks without asking) and I wan't a columned interface for users to read/write to the configuration files.
What is everyone's thoughts on this. Time to retrieve and refresh data is important. The ability to travel half way around the world and create a 'dummy' sales order to enter into the database is also equally as important.
Any advice would be gratefully appreciated.
Fawxes
An optimist's glass is half full.
A pesimist's glass is half empty.
An engineer goes and gets the right size glass.
|
|
|
|
|
System.IO.IOException: Insufficient system resources exist to complete the requested service.
at System.IO.__Error.WinIOError(Int32 errorCode, String str)
at System.IO.__Error.WinIOError()
at System.IO.FileInfo.MoveTo(String destFileName)
at SPC_Polish_Services.CommonFunction.MoveFile(String oldPath, String fileName, String subDir, Int32 fid, String type)
I'm trying to movefile a file in my windows service.
I've no idea at all how to solve this problem..
please help me...thanks~
sayhigh_soon
|
|
|
|
|
We need to see the code that your using to move the file. The error you posted isn't supplying enough information. Also, is the service running under the Local System account, or an account created for this service?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
The service is running under local system account.
<br />
'********************************************************************<br />
' Process: MoveFile<br />
' Input: oldPath, fileName, subDir ['Save'|'Error'], fid, Type ['NEW' | 'UV']<br />
' Output: Move file to destination folder<br />
'********************************************************************<br />
Public Sub MoveFile(ByVal oldPath As String, ByVal fileName As String, ByVal subDir As String, ByVal fid As Integer, ByVal type As String)<br />
Dim Conn As New SqlConnection(strConn)<br />
Dim fi As New FileInfo(oldPath)<br />
Dim targetDir As String = ConfigurationSettings.AppSettings("dirPath" & type).Trim & "\" & subDir<br />
Dim newPath As String = targetDir & "\" & fileName<br />
Dim tblStatusName As String = ConfigurationSettings.AppSettings("tblStatusName" & type).Trim<br />
Dim errorMsg As String<br />
Dim attempt As Integer = 0<br />
<br />
If File.Exists(newPath) Then<br />
'Extra: To ensure delete only normal file (destination folder)<br />
File.SetAttributes(newPath, FileAttributes.Normal)<br />
File.Delete(newPath)<br />
End If<br />
<br />
'Try for another 5 attempts if meet "it is being used by another process" error<br />
Do<br />
Try<br />
'Set the Read-Only file (source folder) to normal file before move to destination folder<br />
If File.Exists(oldPath) Then<br />
File.SetAttributes(oldPath, FileAttributes.Normal)<br />
<br />
'If target folder not exist then create the folder<br />
If Not Directory.Exists(targetDir) Then<br />
Directory.CreateDirectory(targetDir)<br />
End If<br />
fi.MoveTo(newPath)<br />
<br />
'Log<br />
EvtLog("File successfully moved to " & newPath, localhost.EventLogEntryType.Information, 5)<br />
DBLog(logTableName, type, oldPath, "File successfully moved to " & newPath, logName, logSource)<br />
End If<br />
<br />
GoTo final<br />
<br />
Catch ex As Exception<br />
errorMsg = ex.ToString<br />
<br />
If InStr(errorMsg, "it is being used by another process") <> 0 Then<br />
<br />
If attempt <= 5 Then<br />
EvtLog("*** Sub MoveFile Attempt " & attempt & " fail(" & oldPath & "): " & ex.ToString, localhost.EventLogEntryType.Error, 15)<br />
DBLog(logTableName, type, oldPath, "Sub MoveFile Attempt " & attempt & " fail: " & ex.ToString, logName, logSource)<br />
<br />
attempt += 1<br />
<br />
'Wait for 30 seconds before go for another attempt<br />
Thread.CurrentThread.Sleep(30000)<br />
End If<br />
<br />
Else<br />
GoTo email<br />
End If<br />
End Try<br />
Loop While attempt <= 5<br />
.....<br />
.....<br />
.....<br />
End Sub<br />
sayhigh
|
|
|
|
|
A little convoluted, don't you think?
First, strip out all the logging code and get it down to just what is essential for making 5 attempts at moving the file.
Get rid of this line, you never use the object:
Dim Conn As New SqlConnection(strConn)
Rewrite the code and NEVER use "Goto"'s.
Get rid of the "fid" parameter in your method header, you never use it.
Get rid of the "type" parameter in your method header. All you use it for is logging information, which is not an essential part of what this function does.
KEEP IT SIMPLE! Get it down to a working function first, then add the logging code you need.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I am getting a similar error. I have a simple windows app that copies a local file to a unc path. The application works fine on 5 out of 6 win2003 servers. on the 6th one it throws an error similar to the one shown above. So far i can't find any setup differences between the servers.
here is the function i have that copies the file. pretty straightforward. 
public static string SaveFile(string destinationPath, byte[] file, string fileName, bool overwriteExisting)
{
string returnFileName = fileName;
if (overwriteExisting == true)
{
using (FileStream fStream = new FileStream(destinationPath + @"\" + returnFileName, FileMode.Create, FileAccess.Write))
{
fStream.Write(file, 0, file.GetLength(0));
fStream.Seek(0, SeekOrigin.Begin);
}
}
else
{
using (FileStream fStream = new FileStream(destinationPath + @"\" + returnFileName, FileMode.CreateNew, FileAccess.Write))
{
fStream.Write(file, 0, file.GetLength(0));
fStream.Seek(0, SeekOrigin.Begin);
}
}
return returnFileName;
}
Kirk Quinbar
Zywave, Inc.
|
|
|
|
|
HI Everybody!
I just want to know what is major difference between a Dataset and reordset.
Does recordset object is supported in VB.NET
Please help me in finding the answer
|
|
|
|
|
A recordset is just that, a set of records in a single table. A DataSet can represent multiple tables, with varying records, and relationships between those tables.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Hai ,
the major difference is ADO recordset is Connectted DataAccess and a single dimensionsional array to hold datas
in 1d array so if you wanna navigate through data ,u need to use movenext,movelast method,BUt in .net
is disconnected data access ,The datas are stored in datatable in multidimensionsal array like your database table.
so you can navigate the record via simple methods.and dataset is the in memory representation that can hold many tables.
you can make relationship bettween table and dataset is in XSD for so you can send through network without marshelling.
and you can use ADO recordset objects in .Net with the refernce of MsADo.dll files For more info go to MSDN APril 2003
Ishak
Programmer analyst
ITI KSA
|
|
|
|
|
Dear Visual Basic & Access Experts
In my application program, I have a Access (version xp) form that calls a update event handler. In this handler I need to know if the user has clicked on the "Close" button of the form. What VBasic codes do we use to check what action triggers off the the chain of events that lead up to the update event & onwards? In particular I am interested to to check if the triggering event is the clicking of the "Close" button of the form; if so I will then write some code to handle this particular case. I tried to handle this via Close event handler but since it comes after the "Update" event, it does not work.
Please help...Cheers! Michael
|
|
|
|
|
FuzMic wrote:
In this handler I need to know if the user has clicked on the "Close" button of the form.
There is no way to trace back to see what triggered the update. Since the Close event of the form fires AFTER your Update event, you can't set a flag that specifies the form is closing, so there is no way for your code to know the difference, and frankly, in the grand scheme of things, the Update event shouldn't care if the form is closing or not.
Why do you need to change the functionality of the Update on Form Close?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
It sounds like you are trying the round-a-bout way of doing things.
Could you do what you want by having separate 'OK' and 'Cancel' buttons? With a cancel button you can prevent the Update, if that's what you're looking to do.
FuzMic wrote:
In particular I am interested to to check if the triggering event is the clicking of the "Close" button of the form
If you just want to know if the close button has been clicked when the Update event occurs, you could define a module-level boolean such as closeClicked initialized to FALSE.
In the Close button's OnClick handler, set closeClicked = TRUE. Then, in your OnUpdate handler, you can check the value of closeClicked to see if the button has been pushed.
Just make sure you set closeClicked = TRUE before the docmd.close acForm, me.name command.
I wouldn't go so far as to call this method 'sloppy', but I would think there should be a more graceful way of accomplishing your goal.
|
|
|
|
|
Dear Mike the Red from Fuzzy Mike
Perhaps my message was not clear; I am not referring to a Close "Command" button that is placed on a form. I am referring to the Form Close button that comes inherent with the form on top right hand corner; in which case, how can a boolean var be flagged on clicking since there is no such event handler within the form to set it up ... UNLESS ... it is via the Window OS???.
Come what say u; Thanks & Cheers!.
Dear Dave Kreskowiak
You wrote: Why do you need to change the functionality of the Update on Form
Close?
I am using the Update event handler to do various checks such as check for duplicate, empty fields, etc. Thus if a user click on the Form Close, the form will go into the update event if the form is dirtied. At this point if the test failed, a message tells user the option to Undo or to make corrections. However since the user want to close the form, I must drop the correction option and change the message.
By the way how do Window OS handle a form close event?
Thanks & Cheers!
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
