|
Can someone explain me how to do this ?? plz....with a simple sample code...thank u
|
|
|
|
|
Sure:
#define KEY_DOWN( X ) ( (X) & 0x8000 )
BOOL
kb_shift_down()
{
return KEY_DOWN( GetKeyState( VK_SHIFT ) ) != 0;
}
Neville Franks, Author of ED for Windows www.getsoft.com and Surfulater www.surfulater.com "Save what you Surf"
|
|
|
|
|
Thanks for ur patience friend...But still my doubt was how to get the key state of alphabet keys...ie A-Z or a-z ...
should i give as GetKeyState('A') or
GetKeyState(Scancode of the character)
Thank u
|
|
|
|
|
|
Yes , i can understand friend...but this case works out in a single machine..But in Client and Server concept it fails..I use the same GetKeyState() fn to retrieve the keystate...I check for its return value...
getKey = ::GetKeyState(vk);
if(getKey & 0xF000)
printf("%c pressed 0xF000\n",tempbuffer[c]);
else if(getKey & 0x000F)
printf("%c releases 0x000F\n",tempbuffer[c]);
else if(getKey & 0x0001 == 0x0001)
printf("%c Key is toggled\n",tempbuffer[c]);
else if( getKey & 0x8000 == 0x8000)
printf("%c Key is pressed\n",tempbuffer[c]);
else
printf("%c key is neither pressed nor toggled",tempbufferc]);
}
For the above cases
for some of the characters condn. fails and so the message
"Key is neither pressed nor toggled " message gets printed.
What can i do for this ?
Thank u
|
|
|
|
|
When using cdhtmldialog in MFC, the default html file is embedded in the resource. But can I load the html file somewhere in my local machine? thanks for reading.
|
|
|
|
|
|
In VC6, you could add an "Active Document Server" to your project, which would open an in-place-editor in the Devstudio IDE. (With all thebenefits like automatic saving when starting a build)
Can anything similar be done in VC7.1? ADS don't seem to work at all. How?
I never really know a killer from a savior boost your code || Fold With Us! || sighist | doxygen
|
|
|
|
|
If I want to detect the activity(Playing or Recording) of audio device, how can I do?
Is there any Windows API function, Service, or Driver solution?
In addition, how to detect the activity of devices like bluetooth, wireless...etc
|
|
|
|
|
Hi folks,
I have cretaed an SDI application in vc++.
Now i want to change the font of text in the title bar.
How do i do that?
|
|
|
|
|
use CWnd::SetWindowText() function.....
hope that helpz.....
cheerz.....
|
|
|
|
|
Dear rateep,
Setwindowtext() only displays the desired text in the title bar. But my requirement is to change the font of that text.
So please help me find the solution.
Regards,
srinipkweb
|
|
|
|
|
vote 1...
SetWindowText() sets a caption, not the font
TOXCCT >>> GEII power [toxcct][VisualCalc]
|
|
|
|
|
I think the only way you're going to do that is by painting the frame window yourself. In other words by intercepting the WM_NCPAINT, and painting the non client areas (which include the title bar) yourself
|
|
|
|
|
HI Garth,
Thanks for the response.
But will you please give the exact code for painting the frame and its location within the application code.
|
|
|
|
|
See here.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
someone help me, how to code app to play internet radio?
thanks
Nho'c Ti`
|
|
|
|
|
I'm trying to draw a line over a bitmap that is not coming from one of the corners of a pixel,
It can be from the center or any other place as well as the corners of a pixel, currently
if you draw a line, using LineTo(int,int) what happens is the line doesn't start from the
center of the pixel it starts from typically the left upper corner of the pixel,
given a line say that is drawn in paint by pixels, what i want to do is draw a real line (vector type not raster)
that doesn't concern it's self with the actual pixel, similar to a trace program for raster to vector graphics (Adobe Streamline).
they have bitmapped lines, then they draw vector line types over the top of the bitmapped ones,
and when you look at the line it looks as if it was centered on the pixels if it was a vertical or horizontal.
I want to do the same thing....
I was looking at LineDDA but that didn't work I tried LineTO and that didn't work, LineToEx() as well if I have say pixels
50,50 to 150,50 the line that you draw is on the left side of the pixels and is not centered...?
I basically have a bitmap that displays fine, it is in a scrollview and moves, zooms, pans and the scroll perfectly
int py=GetScrollPos(SB_VERT);
CSize sz(GetTotalSize());
// TODO: calculate the total size of this view
int x=(int)( ima->GetWidth()*m_pDoc->m_ZoomFactor);
int y=(int)(ima->GetHeight()*m_pDoc->m_ZoomFactor);
SetScrollSizes(MM_TEXT, CSize(x,y));
Now I realize I am using MM_TEXT so can you create another Mapped cordinate system on top of a bitmap, and how do you do this?
HEre is the basic idea of what i do to draw a bitmap, now I want to draw on top of the bitmap to (but not actually in the bitmap )
(* TAKE A LOOK AT ADOBE streamline *) that is what I want to do....
void OnDraw(CDC* pDC)
{
CVtestDoc* pDoc = GetDocument();
ASSERT_VALID(pDoc);
BOOL bPrinting = pDC->IsPrinting();
CMemDC* pMemDC = NULL;
if (!bPrinting)
pDC = pMemDC = new CMemDC(pDC);
/* more stuff */
SetStretchBltMode(hdc,COLORONCOLOR);
SetDIBitsToDevice(hdc, x, y, cx, cy, 0, 0, 0, cy,info.pImage,(BITMAPINFO*)pDib,DIB_RGB_COLORS);
/*all done now */
delete pMemDC;
}
Any ideas, I'm sure this is very easy.... a simple source code example of a line would be greatly appreciated.
(I will extend this too arcs as well latter)
|
|
|
|
|
Dear All,
I want to develop a tool for the Fault Tree Analysis[FTA].
Now,I can only draw a simple static fault tree using my FTA tool,and with less analysis of minimal cutset.
For further research,I plan to:
(1)Add more analysis;
(2)Draw dynamic fault tree using the new dynamic gates;
(3)Use Markov Chain;
But I don't know the relationship between the static fault tree and the dynamic one,i.e. how to handle them in my FTA tool? and how to use Markov Chain?
If you are familiar with any software packages that can take care of these kinds of things please let me know about them.
If you are interested in FTA,could you please tell me some useful web sites?
If you are developing the FTA tool,would you please give me some examples/source codes about them?
Any information about these will be very highly appreciated.
Thanks in advance.
***
We are making progress everyday.
|
|
|
|
|
Hi there,
Currently, I have a C++ program running that communicated with
a communication device. I can execute commands and receive responses
via my C++ program to/from this device.
Now,i want to setup another version of this system with WEB BASED
capability. And i want to reuse back my existing resources which is
my C++ program. My questions are:
1. Is there any web technology that be able to integrate with C++ program?
2. Is it possible that ASP.net be able to do the job with combination of
c# or vb.net?
3. How about open source web environment which we can integrate with
C++ program?
4. How can a web browser always listen to the server's response if
there has changes going on from the communication device
without refreshing the whole web page?
Pls suggest a suitable architecture for my system in order to run in
both windows and web application with only 1 back-end engine.
Thanks.Pls as soon as possible.
|
|
|
|
|
You have a couple of options: First, you could expose the C++ functionality through a DLL and call it from your asp.net page via the interop facility. Second, you can rewrite the functionality in .NET. Third, you could use a web app server that natively hosts C++ code, like the Lightning Application Server[^].
onwards and upwards...
|
|
|
|
|
Hi all:
Is it possible that when you first rename a parent tree item then the subsequent rename of its child item will be act strange? Is it because of specific style settings or...
|
|
|
|
|
In my program, i got the handle of an explorer window,and i wannna get it's current full path in my program.Any ideas?
|
|
|
|
|
I am not sure about the use of handle to explorer window in your program.
For getting the path of your program ,you can use
GetModuleFileName()
Hope this helps.
Abhi Lahare
|
|
|
|
|
This API : GetWindowModuleFileName : WIll Help.Look for more Info in your local copy of MSDN
"I Think this Will Help"
<h5
alok gupta="" <br=""> visit me at http://www.thisisalok.tk
|
|
|
|