|
What about EnableWindow?
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
|
|
|
|
|
How to get foder size?
eg:there is a folder "new" in c:\\ i want to get size of this folder how to get this in VC++ dialog based application.
|
|
|
|
|
sushildaga1984 wrote: How to get foder size?
eg:there is a folder "new" in c:\\ i want to get size of this folder how to get this in VC++ dialog based application.
find size of all files of folder and add them. It gives you folder size.
|
|
|
|
|
sushildaga1984 wrote: How to get foder size?
Are you wanting the size of the folder itself, or the size of all files in the folder?
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
|
Since it's just an entry in the FAT or MFT, I can only assume it's the size of an allocation unit (e.g., 4KB). Although on an NTFS volume, folder names just might be "resident data" in the MFT itself and not consume any clusters.
"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
Hi EveryOne,
i am adding one method from classwizard.in that i am having parameter list.i want parameter of types CString But in this WE dont have Cstring type so i used BSTR Type.
BOOL ReadBlk(BSTR FAR* MemId, BSTR FAR* MemName, BSTR FAR* eDate, BSTR FAR* Balance, BSTR FAR* TagId);
and when i am setting values to this i am getting error. please tell me how can get string type variable in that classwizard. please help me.
i am becoming 
REPLY ME SOON.
THANKU,
savitri
|
|
|
|
|
savitri wrote: i want parameter of types CString But in this WE dont have Cstring type so i used BSTR Type.
you can just type the name of any data type if your required type is not there, type CString in the parameter type field.
|
|
|
|
|
Well, if you need a CString the type CString in the parameter type box (the wizard not impose you choosing one of the combo items).
You can also edit the generated code.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
|
|
|
|
|
HI EVERYONE, 
thanks for answering my question.but i tryed it.i will not taking.CLASSWIZARD->AUTOMATION->ADD METHOD->external name as reader->internal name as reader->return type long and parameter list strPort as CString i want like this but in this CString is not present so i choosen LPSCSTR. if i want OPTIONAL PARAMETER how can i do it while defining the method. bacause some i wont pass the parameter so i want that parameter as optional.please tell me how can i use it.
REPLY ME SOON.
THNKU,
savitri
|
|
|
|
|
Why don't you edit the generated code and change LPCSTR to CString (both in function declaration and definition)?
To set the last parameter as optional, assign it in the declaration, for instance:
function declaration (header file)
int foo( int i, bool f, CString szMsg = _T("Hi"));
function definition (source file)
int foo( int i, bool f, CString szMsg )
{
}
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
|
|
|
|
|
if i do like this shall i call that function in my program directly as foo(x,y); is it ok or it will give error or what. reply me.
thanku,
savitri
|
|
|
|
|
provided x is int and y is bool, it is OK.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
|
|
|
|
|
Hi all,
If i have a file on my disk say a .exe file and i want to make the shortcut of that file. How can i do it???
Thanks in advance
|
|
|
|
|
|
IshellLink!
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
Never mind - my own stupidity is the source of every "problem" - Mixture
cheers,
Alok Gupta
VC Forum Q&A :- I/ IV
Support CRY- Child Relief and You/codeProject$$>
|
|
|
|
|
i have a button in my application which calls another dialogbox which has a custom message. but my problem is when i click the button the dialog is not popuping up. only when i insert a custom control this is happening. if i add a button or an edit box the window is poping up. how do i solve this out?
|
|
|
|
|
Did you register the Window Class ?
Check this article[^] and verify if you did all the required steps.
|
|
|
|
|
did all that is there in the article..
i created another dialogbox. added a custom control and gave the class name for it. gave a member variable for the control... compiled... there was no error. debugged and checked and figured out that DoModal is returning -1..
|
|
|
|
|
I would still be suspicious that the custom control is not properly registered.
There is a dislog style you can check with resource editor, no fail create, which could help. If you set that, and your dialog comes up without the custom control, then you are just plain not registering it before it's used. You'll have to start debugging through the custom control code to see when the window class for it is registered.
Iain.
Iain Clarke appears because CPallini still cares.
|
|
|
|
|
Iain Clarke wrote: here is a dislog style you can check with resource editor, no fail create, which could help.
i actually dint understand this... is this in the resource editor?? what is that i need to set as?
|
|
|
|
|
Yes, this is in the resource editor. Select the dialog, and edit its styles.
On one of the tabs are tick boxes for visible, group, tab stop, etc. On one of the other tabs is an option for No Fail Create.
In VC6, it's the third tab, called "More Styles", and the tick box is called: "No Fail Create".
Iain.
Iain Clarke appears because CPallini still cares.
|
|
|
|
|
i have ticked the tick box and the dialog box appears on the screen.. but the custom control is still invisible... guess its not registered. did what u told me how to register it. but in vain.. what needs to be done now?
|
|
|
|
|
its resolved... thanks.. i have registered the contrl and the graph is getting displayed in the screen... thanks a lot for the help
|
|
|
|
|
Glad to hear all is good for you.
Iain.
Iain Clarke appears because CPallini still cares.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
