|
I used Modeless.
I had created them using CreateIndirect Method.
|
|
|
|
|
Hi,
I am displaying one graphics in my view...the graphics page is designed in seperate software(Glg toolkit) and im displaying and working in ti by using glg.dll .
I want to change the font color of the graphics text from my coding.Is there any possibility to do this?
I can select the clor of the text from that glg software itself but the whole page get that one color and dispalyed.
i.e, if i select green then the total text available in the page is turned to green color.
I want to give different color to diffeent text from my coding.
I think its not possible to do this...But is there any way means pls help me out?
Anu
|
|
|
|
|
Do you want to change color font from a text into a graphic file?
|
|
|
|
|
You would be better searching for a Glg toolkit forum, where the members may be better able to help you. In normal code we would simply call SetTextColor(), but your Glg would have it's own methods of doing this.
|
|
|
|
|
I guess he want to reads graphic file and then change color from texts
|
|
|
|
|
Hi All.
How can we chnage default color to our own color of a dialog box in MFC Dialog based applications.
Thanaking You all
Shesahidar Patnam
|
|
|
|
|
sheshidar wrote: How can change color of dialog box
Override WM_CTLCOLOR.
HBRUSH COnlyForYou::OnCtlColor(CDC* pDC, CWnd* pWnd, UINT nCtlColor)
{
HBRUSH hbr = CDialog::OnCtlColor(pDC, pWnd, nCtlColor);
HBRUSH BkgBrush = ::CreateSolidBrush(RGB(0,0,255));
if(GetSafeHwnd()==pWnd->GetSafeHwnd())
{
pDC->SetBkColor(RGB(0,0,255));
hbr = BkgBrush;
}
return hbr;
}
Somethings seem HARD to do, until we know how to do them.
 _AnShUmAn_
|
|
|
|
|
Thx very much.
but how I have to call this function.
|
|
|
|
|
You dont need to call this event you need to insert this event to your class
|
|
|
|
|
Thx very Much I got it now,
|
|
|
|
|
sheshidar wrote: how I have to call this function.
You can use class wizard to add the code for you.
The framework calls this member function when a child control is about to be drawn.
Somethings seem HARD to do, until we know how to do them.
_AnShUmAn_
|
|
|
|
|
Hi Gurus,
I'm using Visual C++ 6 and somewhat familiar with using Automation locally.
I am hoping to communicate with a program over the network as easily as I do
it locally.
Here is some code (note the comments):
CString strPCName;
GetDlgItemText(IDC_EDT_REMOTE,strPCName);
//m_PIDatsApp is a COleDispatchDriver wrapper class
if (strPCName.IsEmpty()) //local
{
m_PIDatsApp.CreateDispatch("PIDats.Application");
}
else //remote
{
LPDISPATCH lpDispatch = GetRemoteDispatch
(L"PIDats.Application",(LPCTSTR)strPCName);
if (lpDispatch)
m_PIDatsApp.AttachDispatch(lpDispatch);
}
m_PIDatsApp.OnFileNew();
LPDISPATCH GetRemoteDispatch( WCHAR* lpProgID, LPCTSTR lpPCName )
{
LPDISPATCH pDisp = NULL;
USES_CONVERSION;
COSERVERINFO SI;
::ZeroMemory(&SI, sizeof(SI));
SI.pwszName = T2OLE((LPTSTR)lpPCName);
CLSID clsid;
::CLSIDFromProgID(lpProgID, &clsid);
MULTI_QI rgmqResults;
IID IID_IUnk = IID_IUnknown;
rgmqResults.pIID = &IID_IUnk;
rgmqResults.pItf = NULL;
rgmqResults.hr=0;
HRESULT hr = ::CoCreateInstanceEx(clsid, NULL, CLSCTX_REMOTE_SERVER,
&SI, //Machine on which the object is to be instantiated
1, //Number of MULTI_QI structures in rgmqResults
&rgmqResults //Array of MULTI_QI structures
);
if( SUCCEEDED(hr) )
{
LPUNKNOWN pUnk = rgmqResults.pItf;
VERIFY(S_OK==pUnk->QueryInterface(IID_IDispatch, (void**)&pDisp));
pUnk->Release();
}
return pDisp;
}
I note that I'm able to start the program (PI_Dats) either way. But if
PI_Dats is on a remote machine, when I get to m_PIDatsApp.OnFileNew(), the
debugger on the server doesn't move past it. I put a message box in the
OnFileNew() function on the server; it did not pop up. However,
OnFileNew() works fine locally. I was hoping that I would be able to work
remotely without many modifications. Apparently I can't do that? What would
be a good source to study to learn how to use Automation functions (I'm
noping I don't have to learn low-level DCOM)?
Another difference is debugging on the server. Locally, I'm able to debug a
server program easily. In this case I try to do that by running the program
on the server with /Embedding as a program argument. But then when I use
GetRemoteDispatch() above, a new instance of the program is created on the
server, so I can't use the debugger on the server. How can I use the debugger
on the server?
Also, once the program has started on the server, I don't know how to stop
it. Using the Task Manager doesn't do it, a message box pops up that says
"Access denied." The only way to stop it is to reboot, which is time
consuming. How can I shut down the program started on the server?
I'm using Windows 2000 on the client computer, Windows NT on the server.
Thanks for any help.
|
|
|
|
|
Have you got a proxy registered on the client machine and a stub registered on the server?
Steve
|
|
|
|
|
Thanks for your reply. To answer your question, I don't and I don't know what they are. This is what I need to learn about. What is a good book or other source of information on DCOM programming with MFC? I want to use the local automation already in place over a network.
Thanks,
GF
|
|
|
|
|
Say I have a CCriticalSection member variable (m_cs) in my class A
In some routine Foo
A::Foo()
{
m_cs.Lock();
m_cs.Lock();
cout<<"Entered";
}
when i call Foo() from a single thread , will it encounter the cout statement ?
Engineering is the effort !
|
|
|
|
|
|
is it because the mechanism is supposed to provide protection between thread boundaries only ?
Engineering is the effort !
|
|
|
|
|
yep.
a critical section can be owned by one thread at a time - all other threads are blocked until the owning thread releases it, but the owner thread can skip over the block as much as it wants. it can even re-lock as often as it wants, though it must un-lock once for each lock.
more here
|
|
|
|
|
Hello,
I'm working on a application, Win32 Console C++ with MFC support, and when its started it starts like a normal CMD window, but i want it to start in full screen mode... (as can be done manualy by changing properties for the window. (or like old dos games
Any ideas are welcome!
/Johannes
|
|
|
|
|
You can use Win32 call SetConsoleWindowInfo() to set full screen console. This tutorial can help you.
Best,
Jun
|
|
|
|
|
Help! I've looked everywhere but can't find the answer.
I create a CPropertySheet containing a bunch of CPropertyPages.
If I launch it using DoModal it looks like it has the right width, i.e. the width of my property pages (which are all the same size).
But when I use SetWizardMode(), the resulting dialog is much wider than it needs to be. The buttons at the bottom are shoved to the right with empty space on the left. But my propertypages (according to Spy++) have been inflated in width. Their controls appear at the left, and there's a large empty space on the right, above the Cancel/Help buttons.
Does anyone have an idea what's going on here, and what I can do about it? I've tried all sorts of things (checking all contents, moving the buttons to the left, etc.) but I must be missing the obvious because nothing works.
You can see this behaviour in a simple app with just a default property page in a property sheet, too. Oh yeah, this is Visual C++ 6.0, and I'm using MFC.
Thanks.
- Owen -
|
|
|
|
|
I have a propertysheet with 2-property pages. If I am in one
propertypage, how can I get a pointer to another to access a
variable in that other page.
In PropertyPageA.h, I tried having:
#include "MyPropertySheet.h"
but then I get compile errors. If I can somehow get a pointer
to the propertysheet, then I can get a pointer to that other
page.
I cant seem to get a pointer to the propertysheet though.
Please, any response any one can give me will be greatly
appreciated.
Sincerely,
Danielle Brina
|
|
|
|
|
DanYELL wrote: I cant seem to get a pointer to the propertysheet though
void CMyPage::Foo()
{
CMyPropSheet* p = (CMyPropSheet*)GetParent();
}
|
|
|
|
|
Hi all,
I am using CAsyncSocket derived class for a client server application.
I am quite confused about the OnSend() function.
When i send any data using Send(), then why exactly do i need OnSend(). What i mean is, if i have already sent the data using Send() do i need to send it again in OnSend().
For OnReceive() i understand that whenever there is some data available in the buffer, it will be called and we can receive the message. There is no special requirement to call Receive() explicitly outside, so that OnReceive() will be called.
Can anyone please answer that.
To put it more clearly, do i need to implement OnSend() to send out data ?
Thanks in advance.
*** Who said nothing is impossible? I have been doing it for a long time ***
|
|
|
|
|
CoolASL wrote: do i need to implement OnSend() to send out data ?
They hide those explanations in the Documentation[^]
led mike
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
