|
The WM_ACTIVATEAPP message gives you the thread ID of the app that had or is getting the focus from your app. You might be able to use EnumThreadWindows to find the window associated with the thread. When you want to set focus back to that window use SetForegroundWindow.
Hope this helps, as it is all quessing. Never done this myself.
"You're obviously a superstar." - Christian Graus about me - 12 Feb '03
"Obviously ??? You're definitely a superstar!!!" mYkel - 21 Jun '04
Within you lies the power for good - Use it!
Honoured as one of The Most Helpful Members of 2004
|
|
|
|
|
Sounds interesting, I'll have a look at it! Thank you!
Best regards
Dominik
_outp(0x64, 0xAD);
and
__asm mov al, 0xAD __asm out 0x64, al
do the same... but what do they do?? 
(doesn't work on NT)
|
|
|
|
|
Mircea Puiu wrote:
I'm afraid I do not understand what you need
Same here.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
|
Hi everybody , i want to write a application similar to "Program Control" that firewalls have, when a firewall is asking you to allow or deny acces to given program to internet , when this program tries to connect to internet.
Can anybody give me link to any web site or any article where i can find information regarding this.
Thanks in advance
m0n0
|
|
|
|
|
|
Hi all,
Who had worked on Pocket PC please help me!
I'm using CPtrArray to store a array of pointer(as below, it is pointer of CData class).
+ Firstly, I allocate memory for objects (using operator "new") , and add them to CPtrArray.
+ Then, I get these pointers and using "delete" operator to free allocated memory.
However, even though I freed all allocated memory, but for the frist times of runing this source on Pocket PC, memory always increase.
Of course, for next times of runing, memory is not changed.
(I monitor memory by go to "Setting\Memory")
Here is my source code:
class CData
{
public:
CData();
virtual ~CData();
private:
wstring m_strFullName;
wstring m_strNativePlace;
wstring m_strDescription;
int m_nAge;
int m_nHeight;
int m_nWeight;
bool m_bSex.
}
CPtrArray lstData;
CData * pData;
int nSize = 10000;
for (int i = 0; i < nSize; ++i)
{
lstData.Add(new CData());
}
for (i = 0; i < nSize; ++i)
{
pData = (CData*)lstData.GetAt(i);
delete pData;//free memory
}
lstData.RemoveAll();
lstData.FreeExtra();
Many thanks for your help.
|
|
|
|
|
Your code appears to be fine.
Maybe since your PocketPC application uses a certain 'maximum' amount of memory, that memory is now available and 'allocated' by the OS for use by your program from a pool. Within the 'pool' your application undergoes subsequent suballocations. You might need to see if the PocketPC API has some other type of memory compaction routine you need to call. Then you might see the memory footprint reduced.
|
|
|
|
|
Thanks Blake Miller,
I have just try your idea and You are correct!
I created 2-buttons on a dialog. And on LButtonDown event of those buttons, I implemented as the same source code to allocate memory, add pointers to array and finally, free them.
At first, I clicked mouse on Button 1, and of course, the memory was increased.
But, I clicked mouse on Button 2 later, the memory was not changed.
However, I have not found a API function as you suggested.
My PDA configuration is "HP iPAQ hx2410".
I'm a beginer of programing on PDA.
please help me!
|
|
|
|
|
I have no idea if there is such a function, I just suspected that you had to look for one.
Sometimes the memory management software on handhelds behaves this way.
|
|
|
|
|
I need to write a winsock application that captures localhost process packet information. That includes Server host name, ports, all the requests and responses.
How to do that in MFC/SDK. Do i need to write a asychronous raw socket application that monitors the localhost or write a dll injector that monitor all the host process api calls.
Which is better?
|
|
|
|
|
Hello Programmers ...
I am trying to develop a software which enables the PC to comunicate with a bluetooth device ...
I want an SDK or anything to help me with this ...
The function i want to use are:
search -> searchs for bluetooth devices and returns the avalible ID's.
Find -> bool function that searches for a certain ID.
send -> sends a file to a certain ID.
and thank you very much for your time ...
when i was right no one could remember me ...
but when i was wrong no one could forget me ...
(I saw it on an icecream truck when I was kid)
|
|
|
|
|
MSDN have many functions provided to manage the Bluetooth protocol...
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
do you have a link that can give me more information ??
I searched for "MSDN bluetooth" in google .
I got many ruls bu I don't know which I should use ...
-*-*-*-*-*-*-*-*-*-*-*-*-*-*
when i was right no one could remember me ...
but when i was wrong no one could forget me ...
(I saw it on an icecream truck when I was kid)
|
|
|
|
|
you found this[^] ?
what are you lookin for exactly ?
for me, everything you need is dispatched into the 3 sections explained there...
...but you have to install the SDK...!
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
I was hoping that I could get some tips on how I could structure a (piece of a) program that does the following:
* Listens for incoming UDP broadcasts (using recvfrom) on port 1337.
* Send periodic UDP broadcasts (every 5-60 seconds or so).
* Maintains a table of IP addresses of recently received broadcasts and periodically checking if no broadcasts have been received from a particular address in, say, 5 minutes.
Address | Last received
--------------------------------
192.168.0.1 | 12:43:11
192.168.0.101 | 09:11:27
193.129.163.12 | 23:23:07
One way of doing it would be using three separate threads (pseudocode):
thread T1 {
loop {
Listen for broadcast
Add to/update table
}
}
thread T2 {
loop {
Send broadcast
Sleep for 30 seconds
}
}
thread T3 {
loop {
Check timestamps in table
Take appropriate action if a timestamp is too old
Sleep for 2 minutes
}
}
This will work but involves more threads than I feel is needed (unnecesary risk of sync problems etc.) since none of the actions really need to be interleaved. Any suggestions?
Johan Tibell
|
|
|
|
|
I agree, that in the described level of functionality are three threads an unnecessary overhead.
Just firing from the head - you can join at least threads T2 and T3 to one.
then it would be something like:
threadT23
{
loopCounter = 0;
loop
{
Sleep for 30 seconds
Send broadcast
if( loopCounter == 4 )
{
do the T3 work
}
loopCounter++;
if( loopCounter > 4 ) loopCounter = 0;
}
}
similary you can join the T1 with T23, only thing you need is some sort of nonblocking listen.
This is just an idea from the scratch, so not necessarily the best one, but at least something... 
|
|
|
|
|
This is off the top of my head too.. I haven't done much with UDD but I have had alot of experience with TCP.. anyway you could.... use 'network events' to trigger the FD_READ and FD_ACCEPT events catch UDD connections accept them and then read any data sent.. (again i know this works great for TCP, but im not sure how events work if they even work at all for UDD you'll have to look into that)..
Then use 2 timers in your program one to send your broadcasts every 30 seconds and another set to 2 minutes to check your timestamps and take appropriate action if needed..
The only reason you would want to do any of this in seperate threads is if any of the functions bog down your GUI..
Hope this helps..
Whoever said nothing's impossible never tried slamming a revolving door!
|
|
|
|
|
Actually I was hoping that I could avoid using a HWND which is needed for the timers (that I know of). I would prefer if my network module could be seperated from the UI part.
|
|
|
|
|
HWND required for timers?
What is your target platform? If you are targeting Windows 98 or later, then look into CreateWaitableTimer. I can't help but be amused at the number of solutions that go out of their way to make a window of some sort just because they think SetTimer is the only way to get a timeout message in an application 
|
|
|
|
|
The ideal situation would be if could (without relying on windows) do the following:
thread T1 {
loop {
wait for (received datagram OR
update table event OR
send broadcast event) {
}
}
}
Using only one thread would allow me to avoid headaches from dealing with concurrent use of the same datastructure used by both the "receive datagram" and "update table". Is this doable?
|
|
|
|
|
If you can 1) get the UDP events without blocking on the receive, 2) send UDP packets without blocking, and 3) use CreateWaitableTimer, then I think this would be possible. If you are constantly getting receive events, then you will also need to maintain an internal record of when you most recently checked the table, so that you can also automatically check it every 2 seconds even if the CreateWaitableTimer has not expired, or if you miss its event because your thread was busy servicing many receive events.
In other words, you need the 2 second timer in case there is no activity, but you also need to know when 2 seconds have gone by in case you are busy otherwise - you still need to check your table periodically. If you don't need high precision on that 2 seconds, then you can use some GetTickCount() math to track elapsed time.
|
|
|
|
|
I've been trying to find a way to wait for multiple events, both timer and network events at the same time. It looks like I would need a function that does the job as WaitForMultipleObjects and WSAWaitForMultipleEvents at the same time. Or is it possible to use the WSAEVENTs with WaitForMultipleObjects?
I'm not 100% sure that I understood the bit about missing events. If I've understood it correctly events are signaled via flags and you can wait for these flags to be signaled via, for example, WaitForMultipleObjects.
If the timer expires it should set its flag and if I do:
loop {
e = select_event_from_all_signaled_events()
}
I would eventually see that the timer event was signaled (I might catch it later than I intended but it shouldn't be lost). I only need to receive timer events every 15 seconds or so and precision is not important (if it differed by 2 second it would still be no problem).
|
|
|
|
|
I am not sure if the WSA events can be used in the WaitForMultipleObjects.
The reference to 'missing' timing events could have occurred if your thread was so busy processing network events that it did not 'time out' right at 2 seconds, but rather saw the timer event some time AFTER it had finished processing network events. However, since your processing of 'timers' is not so critical, that part would probably work fine.
|
|
|
|
|
It was as I thought then. I expect for the program to be waiting most of the time and receive an UDP message every 30 seconds or so and send one every 60 seconds or so.
I'm suspecting that it isn't possible to construct and entirely event passed (passive) solution for this problem. If I can't find some callback mecanism for both the network and timing events that is.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
