C / C++ / MFC

FirstPrevNext

Re: EnumChildWindows Christian Graus27-Oct-01 20:36 Christian Graus 27-Oct-01 20:36  You're looking for text in the window title bar, or in the main edit area ? I would have thought that doing this for a title bar would work for any program, but if it's the latter, then you're obviously going to need to get a handle on the child window that is the actual edit area, and check that. Christian After all, there's nothing wrong with an elite as long as I'm allowed to be part of it!! - Mike Burston Oct 23, 2001 Re: EnumChildWindows Mustafa Demirhan28-Oct-01 5:24 Mustafa Demirhan 28-Oct-01 5:24  I am looking for the text in the main edit area. So, I am enumerating all child windows and get the text in it. However, this approach does not work with complex programs, like MS Word and VS. I get the text of the toolbars and combo boxes, but I cannot get the text of the main writing area. Mustafa Demirhan Re: EnumChildWindows Christian Graus28-Oct-01 10:28 Christian Graus 28-Oct-01 10:28  Ah, you're enumerating CHILD windows. I'd suggest the relationship in a more complex app is a little more, well, complex, than one main window with a couple of direct children, hence your problem. Try doing it recursively and see how you go. Christian After all, there's nothing wrong with an elite as long as I'm allowed to be part of it!! - Mike Burston Oct 23, 2001 Re: EnumChildWindows Todd Smith28-Oct-01 13:48 Todd Smith 28-Oct-01 13:48  A program like MS Word or VS does not use standard windows components (ie edit box, listbox, etc.) to display text. Standard windows components do not handle custom drawing such as tables, embeded graphics etc. If you want to get the text from a program such as MS Word then you'll have to use OLE Automation. Todd Smith Getting a combobox in a listview subitem?? mhowes27-Oct-01 10:04 mhowes 27-Oct-01 10:04  I can't seem to draw a combobox in a listviews subitem. The combobox sizes funny. The width and position end up correct but it ends up way to high. I get the rectangle of the subitem just fine GetListCtrl().GetSubItemRect(pNMLV->iItem,1,LVIR_LABEL,itemRect); then I create the combobox with the rectangle info... CPropListCombo *pPropCombo = new CPropListCombo; pPropCombo->Create( WS_CHILD | WS_VISIBLE | CBS_DROPDOWNLIST | WS_CLIPCHILDREN,itemRect, this, 200 ); pPropCombo->ShowWindow(SW_SHOW); correct position, and width but it's height is way to big....maybe double the size of what's in the CRect. I tried subtracting a large amount from the itemRect.bottom but it made no difference. I do the SAME thing with a CBotton and a CEdit and it works fine....there isn't some minimum size for a combobox is there?? This is just CComboBox thanks mike Re: Getting a combobox in a listview subitem?? #realJSOP28-Oct-01 3:40 #realJSOP 28-Oct-01 3:40  I think you have to get a pointer to the edit window of the combobox instead of the drop-down window. You're resizing the wrong thing. "...the staggering layers of obcenity in your statement make it a work of art on so many levels." - Jason Jystad, 10/26/2001 putting information into controls that are in a CPropertyPage???? DanYELL27-Oct-01 5:40 DanYELL 27-Oct-01 5:40  I am going bonkers. I received a handful of responses which I printed out, but I still can't get this to work. I call a modal property sheet with two (2) property pages. I use the following code: CPropertySheet sheet("PropertySheet"); CPropertyPage1 Page1; CPropertyPage2 Page2; sheet.AddPage(&Page1); sheet.AddPage(&Page2); sheet.SetActivePage(1); sheet.SetActivePage(0); if (sheet.DoModal() == ID_OK) { } I have single and multiline edit boxes, check boxes, and a CListBox in the property pages. If I type the following before I call DoModal(): Page1.m_edit1 = "hello"; I have no errors. For the single line edit box, this text appears. If I try putting text in a multiline edit box or a simple combobox by typing say: Page1.m_combo.SetCurSel(3); I get a debug assertion error because m_combo is null or the multiline edit box is null. I tried typing something like: CWnd *pWnd; pWnd->GetDlgItem(); then using SetWindowText(), but this doesn't work either. SO MY QUESTION IS: How can I fill edit controls, like a multiline edit box, a combo box, or list box, in a property page before calling DoModal()????? Please, please, any response any one can give me will be greatly appreciated. Sincerely, Danielle (an overworked graduate student) Re: putting information into controls that are in a CPropertyPage???? Chris Losinger27-Oct-01 5:47 Chris Losinger 27-Oct-01 5:47  Page1.m_edit1 = "hello"; this fails for a multi-line edit? assuming m_edit1 is a CString that you've DDX'd to an actual edit control, it should just work. -c Smaller Animals Software, Inc. http://www.smalleranimals.com Re: putting information into controls that are in a CPropertyPage???? Stan Shannon27-Oct-01 5:52 Stan Shannon 27-Oct-01 5:52  You can't, not if those controls belong to and are instantiated by the dialog box you are calling the domoal for. You cannot use a window *as* a window before the window is instantianted. You *can* preload values before the domodal and than, in the initinstance method, for example, load the instantiated controls with those values. "But, daddy, that was back in the hippie ages..." My twelve year old son - winning the argument. "Stan, you are an intelligent guy who responds in meaningful ways" Paul Watson 16/10/01 Re: putting information into controls that are in a CPropertyPage???? Stan Shannon27-Oct-01 12:41 Stan Shannon 27-Oct-01 12:41  Yikes! Sorry. Mike's correct. OnInitDialog() not initinstance. "But, daddy, that was back in the hippie ages..." My twelve year old son - winning the argument. "Stan, you are an intelligent guy who responds in meaningful ways" Paul Watson 16/10/01 Re: putting information into controls that are in a CPropertyPage???? Michael Dunn27-Oct-01 8:03 Michael Dunn 27-Oct-01 8:03  How can I fill edit controls, like a multiline edit box, a combo box, or list box, in a property page before calling DoModal()? You can't, because the control windows haven't been created yet. The correct place to set up controls is OnInitDialog(). At that point, the windows have been created but not yet shown. --Mike-- http://home.inreach.com/mdunn/ This posting is provided "as was" with no warranties, guarantees, lotteries, or any of those little bags of peanuts you get on planes. You assume all risk for crossing the street without holding mommy's hand. © 2001 Mike's Classy Software. Member FDIC. If rash develops, discontinue use. your with and Getting console cursor position? Erik Hammar27-Oct-01 3:59 Erik Hammar 27-Oct-01 3:59  Hi, How can I get the position of the cursor in a console app? I use 'SetConsoleCursorPosition(GetStdHandle(STD_OUTPUT_HANDLE), &coord)' to set the position, but there seems to be no 'GetConsoleCursorPosition' function. Thanks in advance! Erik Re: Getting console cursor position? Nish Nishant27-Oct-01 4:05 Nish Nishant 27-Oct-01 4:05  take a look at GetConsoleScreenBufferInfo Nish Thanks a lot Erik Hammar27-Oct-01 4:12 Erik Hammar 27-Oct-01 4:12  Thanks! How to print a web page in my program? 27-Oct-01 2:46 27-Oct-01 2:46  I want to print a web page in my program, how should I do? Re: How to print a web page in my program? 27-Oct-01 3:10 27-Oct-01 3:10  Try using the Internet Explorer control in ur application. Re: How to print a web page in my program? Not Active27-Oct-01 5:07 Not Active 27-Oct-01 5:07  Do you already have a web browser control? If you do you can use the ExecWB method. Thanks all the people help me,but I need sample code. 27-Oct-01 15:57 27-Oct-01 15:57  and I have inserted a web browser ActiveX control(but not htmlview) in my program.thanks again. Internet Explorer view ... Hadi Rezaee27-Oct-01 1:48 Hadi Rezaee 27-Oct-01 1:48  Hi all, I have a friend that know Java ... I heard that he can write program with the Internet Explorer view ... I mean he can write program without using any dialog or ... inside the Internet Explorer window, first i wanna know is it right ? and in last HOW ? My month article: Game programming by DirectX by Lan Mader. Please visit in: www.geocities.com/hadi_rezaie/index.html Hadi Rezaie Re: Internet Explorer view ... Nish Nishant27-Oct-01 2:44 Nish Nishant 27-Oct-01 2:44  he probably meant he wrote an applet Nish Re: Internet Explorer view ... Hadi Rezaee27-Oct-01 9:46 Hadi Rezaee 27-Oct-01 9:46  Can i write program like this Java program ?(with MFC) My month article: Game programming by DirectX by Lan Mader. Please visit in: www.geocities.com/hadi_rezaie/index.html Hadi Rezaie Re: Internet Explorer view ... Nish Nishant27-Oct-01 19:00 Nish Nishant 27-Oct-01 19:00  Guess you could try writing an ActiveX control Or perhaps you might want to look into HTA Nish Re: Internet Explorer view ... Not Active27-Oct-01 5:05 Not Active 27-Oct-01 5:05  Do you mean an HTA, Hypertext Application? You can write an application that makes use of IE without displaying the IE toolbar, address bar, etc. If you are not familiar with this try changing the extention of a page from htm, or html, to hta and open it. Full Screen 27-Oct-01 0:36 27-Oct-01 0:36  I searched this forum and found articles on taking application to full scrren. I applied the way MSDN article ID:Q164162 specified. The problem I get a border when the window goes fullscreen. Is there a way to remove that border. Thanks in advance. Re: Full Screen Christian Graus27-Oct-01 1:20 Christian Graus 27-Oct-01 1:20  Resize the window so the border is outside it. You can use GetSystemMetrics (SM_CXBORDER, SM_CYBORDER and SM_CYCAPTION to find out the size of those parts of the window you want to hide. Christian After all, there's nothing wrong with an elite as long as I'm allowed to be part of it!! - Mike Burston Oct 23, 2001

Last Visit: 31-Dec-99 18:00     Last Update: 25-May-24 9:26 Refresh ᐊ Prev1...17835178361783717838178391784017841178421784317844 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.