|
I Used "Encoding.Default" while reading the file and it worked.
I like your way also and i'll be trying it too..
Thank You 
Best Wishes
|
|
|
|
|
Hello,
Is there a way of placing an event inside the DataGrid on leaving a particular cell, and an event on the Column (for example TextChanged).
Mine grid is: dataGridRevenues
mine table style: styleLotYields
Thank you
|
|
|
|
|
//
//Member Variables
//
int currentGridColumn = 0;
int currentGridRow = 0;
//
//Wire Up Events
//
this.dataGridDataEntrySheet.CurrentCellChanged += new EventHandler(this.OnGridCurrentCellChanged);
foreach( DataGridTextBoxColumn dataGridTextBoxColumn in this.dataGridTableStyle.GridColumnStyles )
{
dataGridTextBoxColumn.TextBox.TextChanged += new EventHandler(this.GridTextBoxTextChanged);
}
private void OnGridCurrentCellChanged(object sender, EventArgs e)
{
DataGridCell dataGridCell = this.dataGridDataEntrySheet.CurrentCell;
//Update Member Variables
this.currentGridRow = dataGridCell.RowNumber;
this.currentGridColumn = dataGridCell.ColumnNumber;
}
private void GridTextBoxTextChanged(object sender, EventArgs e)
{
if ( this.currentGridRow = 3 && this.currentGridColumn == 5 )
{
//Do some stuff
}
else if ( ... )
{
...
}
...
}
Live Life King Size
Alomgir Miah
|
|
|
|
|
Thank you very much
It helped a lot.
Another Question: If I have a column in a datagrid, with
MapingName = "Quantity"
How can I go through each cell for this particular column.
Thank you again
|
|
|
|
|
If you want the values, then loop through the DataSource, its DataTable I guess in your case.
Please modify the code below
CurrencyManager cm = (CurrencyManager)this.BindingContext[this.dataGrid1.DataSource];
int rowCount = cm.Count;
//assumes datasource is a datatable... looping all the values
int colCount = ((DataTable)this.dataGrid1.DataSource).Columns.Count;
for(int row = 0; row < rowCount; row++)
{
for(int col = 0; col < colCount; col++)
{
object cellValue = this.dataGrid1[row, col];
Console.Write(cellValue.ToString() + " ");
}
}
Live Life King Size
Alomgir Miah
|
|
|
|
|
Thank you,
unfortunatelly the datasource is DataView, and it has no Column definition.
Thank you again.
|
|
|
|
|
It does not matter what the datasource is. CurrencyManager only expects the DataSource to implement IList interface which both DataTable and DataView does.
So please modify the code and use it.
Live Life King Size
Alomgir Miah
|
|
|
|
|
I have a little problem with a small C# Applikation that executes DTS. I don't know if this is the right Newsgroup. First of all here is what the Applikation should do.
A FileWatcherObject is monitoring a Directory for new CSV files. If there are new Files, the files will be added to an hash-table with key and filename. A timer objekt looks every 10 Seconds for Files in the hash-table and starts a DTS-Package for the first 20 Files of the hash-table. The applikation works fine, but after 2300 files i get an error from the DataPump task 80040428. This seems to be an connection problem. all other files after that error will fail too. Is it possible to change the applikation to avoid this error ? Here is the source (windows service)
using System;
using System.Collections;
using System.ComponentModel;
using System.Data;
using System.Diagnostics;
using System.IO;
using System.ServiceProcess;
using System.Configuration;
using System.Runtime.InteropServices;
using Microsoft.SqlServer.DTSPkg80;
namespace xMonitoringService
{
public class xMonitoringService : System.ServiceProcess.ServiceBase
{
/// <summary>
/// Erforderliche Designervariable.
/// </summary>
private System.ComponentModel.Container components = null;
public PackageClass package;
public int count;
public int gsmtcount;
public Hashtable myHT;
private System.Timers.Timer timer1;
public string serverName;
public string userName;
public string password;
public string packageName1;
public string packageName2;
public string packageName3;
public string filter1;
public string filter2;
public string filter3;
string directoryToMonitor;
FileSystemWatcher watcher;
public xMonitoringService()
{
// Dieser Aufruf ist für den Windows Komponenten-Designer erforderlich.
InitializeComponent();
// TODO: Initialisierungen nach dem Aufruf von InitComponent hinzufügen
}
// Der Haupteinstiegspunkt für den Vorgang
static void Main()
{
System.ServiceProcess.ServiceBase[] ServicesToRun;
// Innerhalb eines Prozesses können mehrere Dienste ausgeführt werden. Sie können einen
// Dienst zu diesem Prozess hinzufügen, indem Sie die folgende Zeile ändern,
// um ein zweites Dienstobjekt zu erstellen. Beispiel:
//
// ServicesToRun = new System.ServiceProcess.ServiceBase[] {new Service1(), new MySecondUserService()};
//
ServicesToRun = new System.ServiceProcess.ServiceBase[] { new xMonitoringService() };
System.ServiceProcess.ServiceBase.Run(ServicesToRun);
}
/// <summary>
/// Erforderliche Methode für die Designerunterstützung.
/// Der Inhalt der Methode darf nicht mit dem Code-Editor geändert werden.
/// </summary>
private void InitializeComponent()
{
this.timer1 = new System.Timers.Timer();
components = new System.ComponentModel.Container();
((System.ComponentModel.ISupportInitialize)(this.timer1)).BeginInit();
this.timer1.Enabled = true;
this.timer1.Interval = 10000;
this.timer1.Elapsed += new System.Timers.ElapsedEventHandler(this.timer1_Elapsed);
this.ServiceName = "xMonitoringService";
count=0;
gsmtcount=0;
myHT = new Hashtable();
serverName = System.Configuration.ConfigurationSettings.AppSettings["serverName"];
userName = System.Configuration.ConfigurationSettings.AppSettings["userName"];
password = System.Configuration.ConfigurationSettings.AppSettings["password"];
packageName1 = System.Configuration.ConfigurationSettings.AppSettings["packageName1"];
packageName2 = System.Configuration.ConfigurationSettings.AppSettings["packageName2"];
packageName3 = System.Configuration.ConfigurationSettings.AppSettings["packageName3"];
directoryToMonitor = System.Configuration.ConfigurationSettings.AppSettings["directoryToMonitor"];
filter1 = System.Configuration.ConfigurationSettings.AppSettings["filter1"];
filter2 = System.Configuration.ConfigurationSettings.AppSettings["filter2"];
filter3 = System.Configuration.ConfigurationSettings.AppSettings["filter3"];
((System.ComponentModel.ISupportInitialize)(this.timer1)).EndInit();
}
/// <summary>
/// Die verwendeten Ressourcen bereinigen.
/// </summary>
protected override void Dispose( bool disposing )
{
if( disposing )
{
if (components != null)
{
components.Dispose();
}
}
base.Dispose( disposing );
}
/// <summary>
/// Führen Sie die Vorgänge aus, um den Dienst zu starten.
/// </summary>
protected override void OnStart(string[] args)
{
EventLog.WriteEntry("xMonitoringService","On Start");
SetupWatcher();
this.timer1.Enabled = true;
this.timer1.Start();
// TODO: Fügen Sie hier Code hinzu, um Ihren Dienst zu starten.
}
/// <summary>
/// Beenden Sie den Dienst.
/// </summary>
protected override void OnStop()
{
//Disable the watcher
watcher.EnableRaisingEvents = false;
this.timer1.Enabled = false;
this.timer1.Stop();
myHT.Clear();
myHT = null;
serverName= null;
userName= null;
password= null;
packageName1= null;
packageName2= null;
packageName3= null;
filter1= null;
filter2= null;
filter3= null;
directoryToMonitor= null;
EventLog.WriteEntry("xMonitoringService","On Stop");
// TODO: Hier Code zum Ausführen erforderlicher Löschvorgänge zum Anhalten des Dienstes einfügen.
}
private void SetupWatcher()
{
// Create a new FileSystemWatcher and set its properties.
watcher = new System.IO.FileSystemWatcher();
watcher.Path = directoryToMonitor;
//Watch for changes in FileName
watcher.NotifyFilter = NotifyFilters.FileName;
//Watch for all files.
watcher.Filter = "";
//Add event handlers.
watcher.Created += new FileSystemEventHandler(OnCreated); //Begin watching
watcher.EnableRaisingEvents = true;
}
// Define the event handlers.
public void OnCreated(object source, FileSystemEventArgs e)
{
// Specify what is done when a file is created.
//Pass in the path of the file to the DTS Package
myHT.Add(e.Name.ToString(),e.FullPath.ToString());
//ExecutePackage(e.Name,e.FullPath);
}
private void timer1_Elapsed(object sender,System.Timers.ElapsedEventArgs e)
{
IDictionaryEnumerator myEnumerator = myHT.GetEnumerator();
try
{
while ( myEnumerator.MoveNext() && count < 20)
{
if(File.Exists(myEnumerator.Value.ToString()))
{
ExecutePackage(myEnumerator.Key.ToString(),myEnumerator.Value.ToString());
count++;
myHT.Remove(myEnumerator.Key);
gsmtcount++;
}
}
if(myHT.Count == 0)
{
myHT.Clear();
myHT = new Hashtable();
}
count=0;
myEnumerator = null;
}
catch(System.Exception ex)
{
EventLog.WriteEntry("xMonitoringService","Error Message :" + ex.Message + " Stack Trace : " + ex.StackTrace + ex.Source);
}
finally
{
if(myHT.Count == 0)
{
myHT.Clear();
myHT = null;
myHT = new Hashtable();
}
myEnumerator = null;
}
}
public void ExecutePackage(string gv_fileName, string gvFullFileName)
{
try
{
package = new PackageClass();
UCOMIConnectionPointContainer CnnctPtCont = (UCOMIConnectionPointContainer) package;
UCOMIConnectionPoint CnnctPt;
PackageEventsSink PES = new PackageEventsSink ();
Guid guid = new Guid("10020605-EB1C-11CF-AE6E-00AA004A34D5"); // UUID of PackageEvents Interface
CnnctPtCont.FindConnectionPoint(ref guid, out CnnctPt);
int iCookie;
CnnctPt.Advise(PES, out iCookie);
object pVarPersistStgOfHost = null;
//Retrieve global settings from the Configuration File
string packageName="";
if (gv_fileName.IndexOf(filter1)!= -1)
{
packageName = packageName1;
}
if (gv_fileName.IndexOf(filter2)!= -1)
{
packageName = packageName2;
}
if (gv_fileName.IndexOf(filter3)!= -1)
{
packageName = packageName3;
}
if (packageName != "")
{
package.LoadFromSQLServer(serverName,userName, password,DTSSQLServerStorageFlags.DTSSQLStgFlag_Default, null, null, null, packageName, ref pVarPersistStgOfHost);
//Loop through all the Global variables and remove the
//variables that are of type string
foreach(GlobalVariable global in package.GlobalVariables)
{
if (global.Name == "gv_FileFullName")
{
package.GlobalVariables.Remove(global.Name);
}
if (global.Name == "gv_fileName")
{
package.GlobalVariables.Remove(global.Name);
}
}
//Read all the global variables that are of type string
package.GlobalVariables.AddGlobalVariable("gv_FileFullName",gvFullFileName);
package.GlobalVariables.AddGlobalVariable("gv_fileName",gv_fileName);
package.Execute();
package.UnInitialize();
package = null;
CnnctPt.Unadvise(iCookie);
}
}
catch(System.Runtime.InteropServices.COMException ex)
{
EventLog.WriteEntry("xMonitoringService","Error Code : " + ex.ErrorCode + "Error Message :" + ex.Message + " Stack Trace : " + ex.StackTrace + ex.Source);
}
catch(System.Exception ex)
{
EventLog.WriteEntry("xMonitoringService", "Error Message :" + ex.Message + " Stack Trace : " + ex.StackTrace + ex.InnerException +" "+ex.TargetSite);
}
finally
{
package.UnInitialize();
package = null;
}
}
public class PackageEventsSink : DTS.PackageEvents
{
public void OnQueryCancel(string EventSource, ref bool pbCancel)
{
EventLog.WriteEntry("xMonitoringService"," In OnQueryCancel: Event Source: " + EventSource);
pbCancel = false;
}
public void OnStart(string EventSource)
{
EventLog.WriteEntry("xMonitoringService"," In OnStart: Event Source: " + EventSource);
}
public void OnProgress(string EventSource, string ProgressDescription, int PercentComplete, int ProgressCountLow, int ProgressCountHigh)
{
EventLog.WriteEntry("xMonitoringService"," In OnProgress: Event Source: " + EventSource + " Progress Description : " + ProgressDescription +
" PercentComplete : " + PercentComplete +
" ProgressCountLow : " + ProgressCountLow +
" ProgressCountHigh : " + ProgressCountHigh);
}
public void OnError(string EventSource, int ErrorCode, string Source, string Description, string HelpFile, int HelpContext, string IDofInterfaceWithError, ref bool pbCancel)
{
EventLog.WriteEntry("xMonitoringService"," In OnError: Event Source: " + EventSource + " Error Code : " + ErrorCode.ToString() + " Source : " + Source.ToString()+
" Description : " + Description + " HelpFile : " +
HelpFile + " HelpContext : " + HelpContext +
" InterfaceError " + IDofInterfaceWithError);
pbCancel = false;
}
public void OnFinish(string EventSource)
{
EventLog.WriteEntry("xMonitoringService", "In OnFinish");
}
}
}
}
|
|
|
|
|
Hi All,
i am planning to validate a label control. i don't know how to set the ControlToValidate property of RegularExpression to a Label control
Can anyone tell me how to validate a label cotrol. is it possible?
|
|
|
|
|
What ????
Are u sure u want to validate a label ??
my point is that a label present data from the system
and if it is not valid it shouldent be there at all;
|
|
|
|
|
WHy would you ever want to? You can't get user input from it, so what's really going on?
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
I develop a dialog inherit ..Form and then make it to a DLL file. but I can not add this dialog's icon in toolbox, it said had none componets needed to add on the toolbox.
I change this class inherit in ..Controls or in System.ComponentModel then it can add a icon which like a gear wheel, but if it inherit by ..Form then it can't work.
My target want to build a dialog component like ..PrintDialog that it can show icon on toolbox and can drag to nonvisible component area.
I wonder if ..Form's designer prevent the inherit form component add as a control..., but why ..PrintDialog which inherit by ..Form can? 
=== Game is power! ===
|
|
|
|
|
It is handled in the class attributes.
[ToolboxItem(true),
ToolboxBitmap(typeof(myControl), "myControl.bmp")]
public class myControl:UserControl
You need to have Default Namespace set to the namespace of your control and you have to have the bitmap in the root of your solution.
There are 10 kinds of people in the world.
Those that read binary...
...and those who don't.
|
|
|
|
|
At first, thanks for you help.![Rose | [Rose]](https://codeproject.freetls.fastly.net/script/Forums/Images/rose.gif)
I do what you said, it works well, the icon that can be showed on toolbox. But when I drag the icon to the designer area and then can not see it. it can not shows on 'nonvisible component area'(a bar at the bottom of designer), say nothing of 'visible area'.
(But funny is it can be selected the component at the Property card  )
=== Game is power! ===
|
|
|
|
|
Haha, I found it myself.;)
Make this class attributes will be ok.
[DesignTimeVisible(true)]
[ToolboxItem(true), ToolboxBitmap(typeof(myDialog), "myDialog.bmp")]
public class myDialog : System.Windows.Forms.Form
=== Game is power! ===
|
|
|
|
|
Hi everybody,
I need your advice/help. I have to create a .NET app that implements our existing DHTML tools.
I use the AxWebBrowser to host them, but now comes the problem. Our original app used to talk to some ASP page via XMLHttp (javascript). In the .NET app the javascript in the webbrowser has to talk to my .NET methods.
To put it simple: how can the contents of an AxWebBrowser talk to its hosting environment (my .NET app)?
I thought of creating an COM object, which I put on my HTML pages, and invoke their methods from the HTML, and the COM object would then throw events that will be caught by .NET (using the mshtml to locate the object). But obviously this is not very neat, and make everything go asynchronous.
Another option would be using MsHtmHstInterop, explained somewhere on the code project, but I didn't find more articles about it, so I wonder if it is good enough.
Thank you for your help.
|
|
|
|
|
Search the articles for Interop and you should find a few articles (including mine) which should give you all that you need.
There are 10 kinds of people in the world.
Those that read binary...
...and those who don't.
|
|
|
|
|
The IE control enables you to display a webpage. When the user clicks on a link/button that takes them to another page, an event is triggered "BeforeNavigate2".
I format my URL in the webpage according to my parsing format so i can determine if i need to display it using my application forms or through standard HTML viewer.
//***** this is the code in my HTMLViewer control which wraps the IE COM control
private void AxWebBrowser1_BeforeNavigate2(object sender, DWebBrowserEvents2_BeforeNavigate2Event e)
{
NavigationInfo ni = NavigationInfo.ParseURL((string)e.uRL);
if (ni.IsInternalURL) //
{
if (NavigationRequested!=null)
{
NavigationRequested(ni); //raise event
}
e.cancel = true;
}
}
'******* code in the form which uses the HTMLViewer control and handles the NavigationRequested event
private void HtmlViewerCC1_NavigationRequested(HTMLViewerCC.NavigationInfo ni)
{
Form f = null;
switch (ni.ObjectType)
{
case ObjectTypeCodes.Users:
f = new frmUsers(ni.Value);
break;
case ObjectTypeCodes.Company:
f = new frmCompany(ni.Value);
break;
default:
throw new Exception("Not supported");
}
f.ShowDialog();
}
|
|
|
|
|
Hi all!
I have a problem, when i create a client application (C# language) to remoting the DLL (C# language) on server (thus DCOM) that is registered.
source code is below:
Type t = Type.GetTypeFromProgID("Class_Name", "Server_Address");<br />
object o = System.Activator.CreateInstance(t);<br />
Class_Name =(Class_Name) o;
Rerult:
If "Server_Address" = null then program work well.
but "Server_Address" = "localhost" or IPaddress then I received the exception:
'System.InvalidCastException': Specified cast is not valid.
Why is it? I need everyone help me soon!
Thanks very much!
sangtao
|
|
|
|
|
I'm having a problem understanding how to register Windows Shell extensions, specifically for PropertySheet extensions and their handlers.
I am not too happy with the way it's done here -
http://www.codeproject.com/cs/miscctrl/HadiPropertySheet.asp
- "Property Sheet Shell Extension in C#"
I think this can be done with PInvoke, rather than RegAsm.exe. Obviosuly, the batch file for putting the keys and appropriate GUID into the registry can be done in code (and would be less error-prone).
Also, can anyone direct me to an example in VB.NET for the same sort of thing that's described in that article? That is, a property sheet extension example.
Thanks for any help - Ian Thomas
|
|
|
|
|
Hello,
I am a newbie in Crystal Reports. I need to sort the report based on the column that the user sets in the windows form. How do I do it?
I've been googling with virtually no help 
Thanks in advance.
Regards,
Zishan
|
|
|
|
|
I don't think you can tell the report to sort from your code. One solution is to build many report, one for each column which the user can choose.
<italic>Work hard, Work effectively.
|
|
|
|
|
Thanks for replying. There should be a way. I got a sample code, Its in VB, I tried it in C# but for some reason.. it doesn't work for me. Here's the code :
Dim crSortDirection As SortDirection
Dim crDatabaseFieldDefinition As DatabaseFieldDefinition
Dim crSortField As SortField
Dim iSortItem As Integer = 0
crDatabaseFieldDefinition = crReportDocument.Database.Tables(0).Fields(6)
crSortField = crReportDocument.DataDefinition.SortFields(6)
crSortField.Field = crDatabaseFieldDefinition
'crSortField.SortDirection = SortDirection.AscendingOrder
crSortField.SortDirection = SortDirection.DescendingOrder
There is no explanation available for the code. No matter what SortField I pass, it keeps throughing CrystalDecisions.CrystalReports.Engine.InvalidArgumentException -> Invalid SortNumber.
Can you explain now?
Zishan
|
|
|
|
|
Ar you sure your C# syntax is correct? In case you are passing a groupfield instead of a databaseField, use the base class:
FieldDef = new FieldDefinition ();
FieldDef = Report.Database.Tables [0].Fields [6];
Report.DataDefinition.SortFields [0].Field = FieldDef;
Absolute faith corrupts as absolutely as absolute power
Eric Hoffer
All that is necessary for the triumph of evil is that good men do nothing.
Edmund Burke
|
|
|
|
|
Same problem Can I make a stored procedure and pass the "order by" parameter? I think that's going to solve the problem. I am using Crystal Reports that comes with the VS.net 2003. How can I call a stored procedure and pass the parameter?
Many thanks.
Zishan
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
