C# Discussion Boards - CodeProject

Joe Woodbury15-Jul-09 5:35

Joe Woodbury

15-Jul-09 5:35

That's Mr. Dick Head to you.

musefan14-Jul-09 7:18

14-Jul-09 7:18

Luc Pattyn wrote:
1. going to a bookstore, as opposed to ordering at Amazon or downloading something

Exercise is the key to a healthy lifestyle.

Luc Pattyn wrote:
2. looking at several books, in order to pick the one one likes most (for whatever reason)

What about if your reason for buying a book is to own the first book you look at in the book store you go into? Would that come under "(for whatever reason)"

Luc Pattyn wrote:
3. studying it (to learn a lot; just owning a book isn't sufficient).

oh but there are many thing you could potentially learn by buying books without reading them. For instance, you could learn where the best place to buy books from is or how you need to buy a bigger shelf for all your new books to fit on Big Grin | :-D

Of course, I'm only playing with you Luc, I'm sure I speak for many when I say you are a very valued member here at CP Smile | :)

Life goes very fast. Tomorrow, today is already yesterday.

Luc Pattyn14-Jul-09 7:45

14-Jul-09 7:45

Hi musefan,

1. I know I should exercise more (and program less).

2. the first book I see in a book store is the book they want to sell most, not something I pay attention to. I'll make up my own mind. The "for whatever reason" really shields me from people asking "which book should I buy?" which I cannot answer since that depends on prior knowledge and experience, taste of style, need for exact information/examples/exercises, etc.

3. I probably own more books than I have read books, so there is a reason I always write "buy and study a book". It may be comforting to keep a book handy, but it is you working through it that raises your knowledge.

musefan wrote:
I'm sure I speak for many when I say ...

Well thanks.

I do like a pun and a joke, that should be obvious by now, however my first concern is helping people who seriously want to be helped. When they don't take my advise, I like to think it's their loss, not mine. And I avoid the obstinate easily, my memory is serving me very well. Bye bye Andy (and several others that will remain unnamed but not forgotten).

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

regarding grab image from mobile camera??

sskset14-Jul-09 7:52

sskset

14-Jul-09 7:52

<br />
public static string test(Guid ID){ return(a == n )?x.group:null;} <br />

Tridip Bhattacharjee14-Jul-09 2:34

Tridip Bhattacharjee

14-Jul-09 2:34

now i may have to develop a win apps which grab image from mobile camera whatever cam will capture and my apps will display those pic in my desktop apps in such a way as if user will think image is broadcasting directly from mobile camera to my desktop apps.i never work before with mobile apps so it will be great help if someone tell me the logic to finished this apps.

tbhattacharjee

Re: regarding grab image from mobile camera??

DoctorMick14-Jul-09 5:19

DoctorMick

14-Jul-09 5:19

What have you tried to do so far?

Re: regarding grab image from mobile camera??

Simon P Stevens14-Jul-09 5:25

Simon P Stevens

14-Jul-09 5:25

There's basically 2 ways to capture images from a camera.

Windows Image Acquisition (WIA) or AviCap32.dll

Some links to get you started.
See here[^]

http://blogs.msdn.com/coding4fun/archive/2006/10/31/912546.aspx[^]

CAviCap and CFrameGrabber - wrappers for AVICap Window[^]

Simon

Re: regarding grab image from mobile camera??

Giorgi Dalakishvili14-Jul-09 6:18

Giorgi Dalakishvili

14-Jul-09 6:18

In order to access files on mobile phone you need to use Obex protocol. Here is an example: Exploring OBEX Devices Connected via Bluetooth[^]

Giorgi Dalakishvili

#region signature
My Articles

Asynchronous Registry Notification Using Strongly-typed WMI Classes in .NET [^]

My blog
#endregion

Narendra Reddy Vajrala14-Jul-09 1:59

Narendra Reddy Vajrala

14-Jul-09 1:59

Hi Experts,

In my VisulaStudio2008 c#.net windows Apllication i have a crystalReport(Main) it have 5 subreports.
i did this report in my local machine so i gave datasource, database name and other credentials i set as local only
but from coding i set database login details dynamically to get data from required source
my code is like this

ShiftSummaryReport  report = new ShiftSummaryReport(); <br />
ReportDocument crSubreportDoc; <br />
Sections crSections; <br />
ReportObjects crReportObjects; <br />
SubreportObject crSubreportObject; <br />
<br />
report.SetDataSource(shiftSummaryDataset.Tables[0]);<br />
report.SetDatabaseLogon(user, password, server, database);<br />
crSections = report.ReportDefinition.Sections;<br />
foreach (Section crsection in crSections) <br />
{<br />
crReportObjects = crsection.ReportObjects;<br />
foreach (ReportObject crreportobject in crReportObjects) <br />
{<br />
if (crreportobject.Kind == ReportObjectKind.SubreportObject) <br />
{<br />
crSubreportObject = (SubreportObject)crreportobject; <br />
crSubreportDoc = crSubreportObject.OpenSubreport(crSubreportObject.SubreportName);<br />
crSubreportDoc.SetDatabaseLogon(user, password, server, database);<br />
}<br />
}<br />
}

i kept debug and checked, values coming to those variables and executing fine.
but still it is asking for database login.
how can i solve this?
please help me out

Thanks In Advance
--Naren

Logic behind... Something?

Baeltazor14-Jul-09 1:18

14-Jul-09 1:18

Hello all,

I have a little problem over here. With my word processor, I'm curerntly implementing a feature that basically automates a whole bunch of tasks that would normally require input of some sort from the user.

I'm not too sure how to explain it, and I'm not looking for code. I just need a little help getting the logic behid it right as I keep going 'round and 'round in circles and getting stuck.

A little info first: It's a tab-based word processor.

Scenario: A user clicks the "Close ALL" menu item.

Logic:

Foreach control tab in tcontrol.tabpages
if selected tab contains textbox and
the selected tab's tag property contains a filepath
and the text inside the textbox, which is inside the selected tab is not equal to the content of the file inside the selected tab's tag property
then save changes to that file. And then close that tab. Then move on to the next tab. And repeat process.

If selected tab's tag property does not contain a filepath, and the textbox inside the selected tab has a length greater than 0, then automatically display the SaveFileDialog, and then close that tab once the file has been saved.

If the selected tab's tag property contains a filepath, but the file that the filepath refers to nolonger exists, then automatically display SaveFileDialog, and close the selected tab if the document has been saved. And Repeat.

I know this might not make any sense at first, come to think of it, after reading what I just wrote, it doesn't really make a whole lot of sense to me but It's very difficult trying to explain exactly what I want to do since there are so many if's and else's etc... Is there an easier way to do something like this of would If/Else/Else If be the best way to go about it.

I've been told to use Switch Statements for this but I honestly have more trouble that way. I haven't searched on google or msdn because I have no idea what search terms to use for this.

Does anybody have any thoughts/suggestions?

thank you

Luc Pattyn14-Jul-09 1:27

14-Jul-09 1:27

Hi,

let me summarize that for you: you have a collection of objects (e,g, tab pages on a form), and these objects may or may not contain "dirty data" i.e. data that still needs to be saved, how to make sure it all gets saved?

This is what I do:
1. I give each object a bool dirty flag, which starts at false; gets set true whenever I change something to the object; and gets set false again when the object's content is either read from or written to permanent storage, such as a disk.

2. when I want to close the app, or close all the objects of the GUI, I enumerate the collection of objects, and for each dirty object, I ask the object to persist itself in any way fit; it is the object itself that either knows how to do that (because it holds the file path) or has to ask the user (because it does not know a file path yet).

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Baeltazor14-Jul-09 1:31

14-Jul-09 1:31

Ahh... That was so perfect it was almost peotic. Laugh | :laugh:

Your answers are always spot on. Thanks you very much Luc Smile | :)

Jase

Rajesh R Subramanian14-Jul-09 1:49

Rajesh R Subramanian

14-Jul-09 1:49

Just adding to Luc's reply, adding a "Do this for all modified files" checkbox will be a nice option to have. Just imagine 30 open documents and all are 'dirty' when the user chooses exit. Also, a "Save all" button on your toolbar would look cool.

Smile | :)

It is a crappy thing, but it's life -^ Carlo Pallini

Baeltazor14-Jul-09 1:51

14-Jul-09 1:51

Thank you Rajesh Big Grin | :-D

That's a great idea, I'll definately do that. Thank you. Smile | :)

Luc Pattyn14-Jul-09 2:11

14-Jul-09 2:11

Rajesh R Subramanian wrote:
Just imagine 30 open documents and all are 'dirty' when the user chooses exit.

I wouldn't advise you to get yourself into such situation. One medium-sized alpha particle could ruin your day.

Poke tongue | ;-P

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

OriginalGriff14-Jul-09 2:13

OriginalGriff

14-Jul-09 2:13

The only thing I add to that is a "changed" event thrown upward - that way the parent can give a visual indication in the tab or whatever (just like VS does with the "*" next to the file name) - and does not have to iterate though all tabs to find any dirty data on closing.

No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.

This message is made of fully recyclable Zeros and Ones

Luc Pattyn14-Jul-09 2:39

14-Jul-09 2:39

No problem, as long as the DirtyChanged event only fires on an actual change of bool dirty. Otherwise every keystroke would set of a whole chain of mostly unnecessary actions.

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Baeltazor14-Jul-09 9:21

14-Jul-09 9:21

Hmmm... It looks like I have alot to think about. This is gonna be fun Poke tongue | ;-P

musefan14-Jul-09 1:31

14-Jul-09 1:31

From what I can gather you have a number of tab pages that contain basically the same controls but can contain different data. when you close all tabs then you want to check certain data and prompt for a save if need be. Is that correct?

What I would do in this instance is create a custom control that will basically be the only control on each of the tab pages. This control will have all your other controls however you choose to lay them out. This custom control should then have a function called ValidateClose() or something that does your tests and prompt the user or whatever. This can then be called in side the foreach loop of each tab when you are closing them all.

using a switch block is basically the same as if else if logic, so use which ever you prefer.

Hope that makes sense and offers some help

Life goes very fast. Tomorrow, today is already yesterday.

Baeltazor14-Jul-09 1:35

c# function for Image Compression

14-Jul-09 1:35

Thanks alot musefan now I have 2 great answers! I'm going to get working on it right away thanks to you guys, and once I'm done, I'll post the code incase somebody else wants to know.

Thanks again musefan and Luc Big Grin | :-D

GauravKP14-Jul-09 1:11

GauravKP

14-Jul-09 1:11

hi..
I want to compress below 1kb to store on smart card which has usually less memory (1kb) , please suggest me some c# function ...
The image is for general use.

Luc Pattyn14-Jul-09 1:14

14-Jul-09 1:14

Hi,

you have asked similar things before. It wasn't clear then and it isn't clear now: do you need a way to reduce an image to a single block of data less than 1KB? or are you looking for ways to split it in several blocks of data each less than 1KB?

And how large are your images (both in pixels and in KB when stored as JPEG)? and what is on your images: faces, landscapes, something synthetic?

Could you show such an image?

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

musefan14-Jul-09 1:19

14-Jul-09 1:19

Predicted answer to your questions...

"Yes, That's exactly what I want. Can you give example"

Life goes very fast. Tomorrow, today is already yesterday.

Luc Pattyn14-Jul-09 1:42

14-Jul-09 1:42

Of course I have an example ready. It will probably be an icon file if that conforms to the question.

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

musefan14-Jul-09 2:42