C# Discussion Boards - CodeProject

http://www.switchonthecode.com/tutorials/dotnet-35-adds-named-pipes-support[^]

12-Aug-09 0:10

Re: How was use namedpipes to communicate with other application in a network?

svt gdwl12-Aug-09 0:50

svt gdwl

12-Aug-09 0:50

I was using vs2005. In this how can I built

Re: How was use namedpipes to communicate with other application in a network?

stancrm12-Aug-09 0:54

accessing controls of one form in another form

12-Aug-09 0:54

scroll to the down and click the link :

http://www.switchonthecode.com/tutorials/interprocess-communication-using-named-pipes-in-csharp[^]

MahaKh11-Aug-09 22:56

MahaKh

11-Aug-09 22:56

i am working with mutiple forms, i want to update the DataGridView of form2 in form3,DAtaGridView gets the table from the data base, i want to update the DataGridView which is in Form2. but cant update it from Form3.DataGridView is not accessable in Form3.
plzzzzzzzzzz help me out.
thanx in advance.

Re: accessing controls of one form in another form [modified]

OriginalGriff11-Aug-09 23:41

OriginalGriff

11-Aug-09 23:41

I am a little confused as too what you want to do, so check if this is correct.

You have two forms:

a) form2 which contains a DataGridView that gets the table from a database.

b) form3 which does some other procesing and wants to supply information to the DataGridView of form2.

c) form3 cannot access the DataGridView of form2.

If this is the case, then it is bad practice to access such members of form2, as it means that form3 becomes reliant on the internal structure of form2. A change to form2 requires a change in form3, which means that form3 cannot be reused easily.

The better way to do this is for form3 to signal an event to form2 ("Update ready" or similar) and provide any necessary data via a queue in form3, or via the event argument.

No trees were harmed in the sending of this message; however, a significant number of electrons were slightly inconvenienced.

This message is made of fully recyclable Zeros and Ones

modified on Wednesday, August 12, 2009 6:12 AM

Application definition was successfully imported, but Entity X has no identifiers defined in the SpecificFinder view

hdv21211-Aug-09 22:38

hdv212

11-Aug-09 22:38

Hi i created a web service with two method that will be call via sharepoint bdc. my problem is that adf file was successfully imported but it has a warning :

Application definition was successfully imported. 1 warning(s) found. Consider fixing the warnings and updating the application definition.
Warning :
Could not create profile page for Entity News. The error is: Profile page creation for the Entity News skipped. Entity News has no identifiers defined in the SpecificFinder view

Here is my web service :

[WebMethod]
    public List<News> GetNews()
    {
        List<News> list = new List<News>();
        using (MySqlConnection con = new MySqlConnection(ConfigurationManager.ConnectionStrings["MySqlConnectionString"].ConnectionString))
        {
            using (MySqlCommand cmd = con.CreateCommand())
            {
                cmd.CommandText = "select id,title,introText,created from jos_content order by created desc,id desc";

                if (con.State != System.Data.ConnectionState.Open)
                    con.Open();

                MySqlDataReader dr = cmd.ExecuteReader();

                while(dr.Read())
                {
                    list.Add(new News(dr.GetInt32(0), dr.GetString(1), dr.GetString(2), dr.GetString(3)));
                }

                dr.Close();
                if (con.State != System.Data.ConnectionState.Closed)
                    con.Close();
            }
        }
        return list;
    }

    [WebMethod]
    public List<News> GetNewsByID(int id)
    {
        List<News> list = new List<News>();
        using (MySqlConnection con = new MySqlConnection(ConfigurationManager.ConnectionStrings["MySqlConnectionString"].ConnectionString))
        {
            using (MySqlCommand cmd = con.CreateCommand())
            {
                cmd.CommandText = "select id,title,introText,created from jos_content where id=@id order by created desc,id desc";
                cmd.Parameters.Add(new MySqlParameter("@id", id));

                if (con.State != System.Data.ConnectionState.Open)
                    con.Open();

                MySqlDataReader dr = cmd.ExecuteReader();

                while (dr.Read())
                {
                    list.Add(new News(dr.GetInt32(0), dr.GetString(1), dr.GetString(2), dr.GetString(3)));
                }

                dr.Close();
                if (con.State != System.Data.ConnectionState.Closed)
                    con.Close();
            }
        }
        return list;
    }

here is my News class :

public class News
{
    int _newsID;
    string _newsTitle;
    string _newsBody;
    string _dateCreated;

    public string DateCreated
    {
        get { return _dateCreated; }
        set { _dateCreated = value; }
    }

    public int NewsID
    {
        get { return _newsID; }
        set { _newsID = value; }
    }

    public string NewsTitle
    {
        get { return _newsTitle; }
        set { _newsTitle = value; }
    }

    public string NewsBody
    {
        get { return _newsBody; }
        set { _newsBody = value; }
    }

	public News()
	{
		
	}

    public News(int id, string title, string body, string dateCreated)
    {
        this.NewsID = id;
        this.NewsTitle = title;
        this.NewsBody = body;
        this._dateCreated = dateCreated;
    }
}

here is my adf file :

<LobSystemInstances>
    <LobSystemInstance Name="ServiceInstance">
      <Properties>
        <Property Name="LobSystemName" Type="System.String">Service</Property>
      </Properties>
    </LobSystemInstance>
  </LobSystemInstances>
  
  <Entities>
    <Entity Name="News">
      <Properties>
        <Property Name="NewsTitle" Type="System.String">NewsTitle</Property>
      </Properties>
      <Identifiers>
        <Identifier Name="NewsID" TypeName="System.Int32"></Identifier>
      </Identifiers>
      <Methods>
        <Method Name="GetNews">
          <Parameters>
            <Parameter Direction="Return" Name="GetNewsResults">
              <TypeDescriptor TypeName="ServiceProxy.News[],Service" IsCollection="true" Name="ArrayOfNews">
                <TypeDescriptors>
                  <TypeDescriptor TypeName="ServiceProxy.News,Service" Name="News">
                    <TypeDescriptors>
                      <TypeDescriptor TypeName="System.Int32" IdentifierName="NewsID" Name="NewsID" />
                      <TypeDescriptor TypeName="System.String" Name="NewsTitle" />
                      <TypeDescriptor TypeName="System.String" Name="NewsBody" />
                      <TypeDescriptor TypeName="System.String" Name="DateCreated" />
                    </TypeDescriptors>
                  </TypeDescriptor>
                </TypeDescriptors>
              </TypeDescriptor>
            </Parameter>
          </Parameters>
          <MethodInstances>
            <MethodInstance Name="FinderGetNewsResultsInstance" Type="Finder" ReturnParameterName="GetNewsResults" ReturnTypeDescriptorName="ArrayOfNews" ReturnTypeDescriptorLevel="0" />
          </MethodInstances>
        </Method>

        <Method Name="GetNewsByID">
          <FilterDescriptors>
            <FilterDescriptor Type="Comparison" Name="NewsID" />
          </FilterDescriptors>
          <Parameters>
            <Parameter Direction="In" Name="NewsID">
              <TypeDescriptor TypeName="System.Int32" Name="NewsID" AssociatedFilter="NewsID" IdentifierName="NewsID" />             
            </Parameter>            
            <Parameter Direction="Return" Name="GetNewsByIDResults">
              <TypeDescriptor TypeName="ServiceProxy.News[],Service" IsCollection="true" Name="ArrayOfNews">
                <TypeDescriptors>
                  <TypeDescriptor TypeName="ServiceProxy.News,Service" Name="News" IdentifierName="NewsID">
                    <TypeDescriptors>
                      <TypeDescriptor TypeName="System.Int32" Name="NewsID" />
                      <TypeDescriptor TypeName="System.String" Name="NewsTitle" />
                      <TypeDescriptor TypeName="System.String" Name="NewsBody" />
                      <TypeDescriptor TypeName="System.String" Name="DateCreated" />
                    </TypeDescriptors>
                  </TypeDescriptor>
                </TypeDescriptors>
              </TypeDescriptor>
            </Parameter>
          </Parameters>
          <MethodInstances>
            <MethodInstance Name="SpecificFinderGetNewsByIDResultsInstance" Type="SpecificFinder" ReturnParameterName="GetNewsByIDResults" ReturnTypeDescriptorName="ArrayOfNews" ReturnTypeDescriptorLevel="0" />
          </MethodInstances>
        </Method>
        
      </Methods>
    </Entity>
  </Entities>

where is my problem and how to solve it ?
thanks

How to convert .MPP File to .XML File in C#

Rajesh_K_Sharma11-Aug-09 22:27

Rajesh_K_Sharma

11-Aug-09 22:27

Hi,
I am making an application integrated with Microsoft Project 2003 in c#. Now ,I want to convert .MPP file in .xml file using C#. I don't how to do this. I need help books or reference guide for integrating with Microsoft Project In C#. if you have any idea .please let me know immediately.

Thanks in advance
Regards,
Rajesh

rajesh

Re: How to convert .MPP File to .XML File in C#

Alenzo_Eid10-Mar-10 0:45

Alenzo_Eid

10-Mar-10 0:45

Hi,

were you able to convert it? since i am having the same problem
Thanks

How to Split one datatable to many datatables?

NguyenDzung11-Aug-09 21:58

NguyenDzung

11-Aug-09 21:58

Hi !! Have a good day

I have a question, please help me !
I want to split a datatable into many datatables, how to do that by c#.net.
Example : datatable is: DA has 250 rows ==> split into 3 datatable : DA1 (100rows) , DA2(100 rows), DA3(50rows)
If datatable DA has 1000 rows, ==> split into 10 datatables, ( thats mean one datatable have less than 100rows)

Thanks for your help!

dan!sh 11-Aug-09 22:14

dan!sh

11-Aug-09 22:14

You will have to loop through the rows and copy them into a new datatable. You can also use DataTable.Select method as well instead of looping through all the rows.

It's not necessary to be so stupid, either, but people manage it. - Christian Graus, 2009 AD

Pete O'Hanlon11-Aug-09 22:36

Pete O'Hanlon

11-Aug-09 22:36

The simplest way would be to write a loop that iterated over the DataTable and allocate rows accordingly. When you do this, you need to clone the table structure, and use ImportRow to copy the row from one table to another. If you attempt to copy the row over directly, you'll get a "row belongs to another table" error. The following method does what you want:

private List<DataTable> CloneTable(DataTable tableToClone, int countLimit)
{
    List<DataTable> tables = new List<DataTable>();
    int count = 0;
    DataTable copyTable = null;
    foreach (DataRow dr in tableToClone.Rows)
    {
        if ((count++ % countLimit) == 0)
        {
            copyTable = new DataTable();
            // Clone the structure of the table.
            copyTable = tableToClone.Clone();
            // Add the new DataTable to the list.
            tables.Add(copyTable);
        }
        // Import the current row.
        copyTable.ImportRow(dr);
    }
    return tables;
}

"WPF has many lovers. It's a veritable porn star!" - Josh Smith

As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.

My blog | My articles | MoXAML PowerToys | Onyx

NguyenDzung12-Aug-09 17:40

NguyenDzung

12-Aug-09 17:40

Thanks for your method !
But i have little experience in c#. can you explain me what is List<datatable>, how can i define ?
I'm writing in c#.net 2003

Get what object a button belongs to?

Prince Antony G5-Jan-12 22:32

Prince Antony G

5-Jan-12 22:32

This code working fine..Thanks lot

xkrja11-Aug-09 21:54

xkrja

11-Aug-09 21:54

I will try to shorten this question. If I have the following class:

public class MyClass
{
public int MyInt {get; set;}
public Button MyBtn {get; set;}
}

Now, let's say I have a for-loop that generates several objects of this class and hooks it up to an event handler like this:

for (int i = 0; i < 5; i++)
            {
                MyClass myClass = new MyClass();
                myClass.MyInt = i;
                myClass.MyBtn = new Button();
                myClass.MyBtn.Click += (s, e) =>
                {
                    //Is it possible to get the value of 'myClass.MyInt'
                    //in this event handler since 'myClass.MyBtn' belongs
                    //to the same object?
                };
            }

So, my question is: Is it possible to get the value of 'myClass.MyInt' when the button is clicked? I mean, 'myClass.MyBtn' and 'myClass.MyInt' belongs to the same object. The problem is that I must hook up all buttons to the same event handler.

Thanks for help!

Pete O'Hanlon11-Aug-09 21:58

Pete O'Hanlon

11-Aug-09 21:58

If you look at the method declaration for your event handler, you'll see a parameter called s of type object - by convention, this is the object that raised the event. So, all you need do is cast s to Button as in:

Button button = s as Button;
if (button != null)
{
  // Do something...
}

"WPF has many lovers. It's a veritable porn star!" - Josh Smith

As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.

My blog | My articles | MoXAML PowerToys | Onyx

xkrja11-Aug-09 22:09

xkrja

11-Aug-09 22:09

Thanks for the reply.

Yes, I know I can get the object that raised that event. But that object belongs to an object 'myClass' which in turn contains 'myClass.MyInt'. Is it possible to get which of the 'myClass.MyBtn' that raised the event. If I can get that I would also be able to read out the value of 'myClass.MyInt'

stancrm11-Aug-09 22:07

11-Aug-09 22:07

Yes. There are 5 MyClass instances and you can use one method for all events. This is better :

private List<MyButton> myButtons = new List<MyButton>();
private void CreateButtons()
{
  for(int i = 0; i < 5; i++)
  {
    MyButton myButton = new MyButton();
    myButton.MyInt = i;
    myButton.Click += new EventHandler(myButton_Click);
    myButtons.Add(myButton);
  }
}

private void myButton_Click(object sender, EventArgs e)
{
  MyButton myButton = sender as MyButton;
  if(myButton != null)
  {
    MessageBox.Show(myButton.MyInt.ToString());
  }
}


public class MyButton : Button
{
  private int myInt;

  public int MyInt
  {
    get { return myInt; }
    set { myInt = value; }
  }
}

xkrja11-Aug-09 22:19

xkrja

11-Aug-09 22:19

Thanks for the reply!

I think that was exactly what I was looking for. I'll try to implement this in my real case and I get back if I don't succeed.

Luc Pattyn11-Aug-09 23:59

Luc Pattyn

11-Aug-09 23:59

You don't even need an extra class, you could store the MyClass reference inside the Button using myClass.MyBtn.Tag=myClass; so later an event handler could convert its sender to Button to MyClass instance.

Smile | :)

Luc Pattyn [Forum Guidelines] [My Articles]

The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.

Daniel Grunwald12-Aug-09 2:53

Daniel Grunwald

12-Aug-09 2:53

xkrja wrote:
//Is it possible to get the value of 'myClass.MyInt'
//in this event handler since 'myClass.MyBtn' belongs
//to the same object?

In your example code: yes.
Just use myClass.MyInt. The lambda expression will capture the myClass variable, so every event handler will know to which MyClass instance it belongs.
You should not capture the i variable - that would always be 5 because the loop has terminated when the event executes.
But capturing variables declared inside the loop will give you the value from the corresponding iteration.

text box multiline

Vivek Vijayan11-Aug-09 21:37

Vivek Vijayan

11-Aug-09 21:37

how do i insert a new line character.
i want to display a sentence in next line. i selected the multiline property. i want to display the second line in next line of text box like wise \n in C lang
can any one help pls

This code was posted by me...

Re: text box multiline

stancrm11-Aug-09 21:44