|
There is no such direct method available in .Net, this can be done using FlashWindow API function which is available in User32.dll file.
Calling this function will require you to use InteropServices class.
Check following link for a tutorial –
http://www.bobpowell.net/flashbar.htm
I hope this helps.
-Ajay.
-------------------------
www.componentone.com
-------------------------
|
|
|
|
|
Hello everyone,
I have a couple of integers, and I want to find a simple and effective way to normalize them into range [0, 1]. Any ideas and code refer?
thanks in advance,
George
|
|
|
|
|
If you only have two ints, then one is 0 and one is 1, right ?
You need to turn them into floats if you want to normalise in a range that includes decimal points. Then you need to decide what the low and high point of the range are, and do the divide/etc on each one to build your normalised list
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
Thanks Christian,
Do you have any pseudo code or tutorials for that idea?
regards,
George
|
|
|
|
|
Hi George,
here is some pseudo-code:
intCollection iCollection=...;
int imin=int.MaxValue;
int imax=int.MinValue;
foreach(int i in iCollection) {
if (i<imin) imin=i;
if (i>imax) imax=i;
}
float fmin=0.0;
float fmax=1.0;
float scale=(fmax-fmin)/(imax-imin);
floatCollection fCollection=...;
foreach (int i in iCollection) {
float f=fmin+(i-imin)*scale;
fCollection.Add(f);
}
}
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
modified on Friday, April 18, 2008 3:37 AM
|
|
|
|
|
Cool, Luc Pattyn!
Clear answer.
regards,
George
|
|
|
|
|
Cool Luc,
I heard there is also a logarithm based normalization approach, do you know how to implement in this way?
regards,
George
|
|
|
|
|
Hi George,
you can perform whatever transformation you want on the input data, then apply the
original code (probably the input then already is floating).
I am not sure what a "logarithm based normalization approach" would be officially,
maybe it is just replace every "int i" by its "float log((float)i)" which of course
only works well for i greater than zero.
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Thanks Luc,
You are so smart!
regards,
George
|
|
|
|
|
Provided the collection contains at least two different elements... 
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
|
|
|
|
|
there are a couple of reasons the thing was called pseudo-code, you discovered one of them 
Luc Pattyn [Forum Guidelines] [My Articles]
This month's tips:
- before you ask a question here, search CodeProject, then Google;
- the quality and detail of your question reflects on the effectiveness of the help you are likely to get;
- use PRE tags to preserve formatting when showing multi-line code snippets.
|
|
|
|
|
Yeah, I know you're an incurably cheater.
If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.
This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke
|
|
|
|
|
Luc Pattyn
|
|
|
|
|
Hi,
I have created a UserControl, and i am trying to add that control in a form in a flowlayout panel.
The User Control is not visible in the flowlayout panel for i dont know what reason...
PLz help.
|
|
|
|
|
Your code is broken. If you showed us the code, we could tell you where.
Isn't a flowlayoutpanel WPF ? I don't think it's winforms ?
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
WinForm has FlowLayoutPanel too.
|
|
|
|
|
OK - well, I apologise, I just wasn't sure. Either way, we can't help you if you can't post code for us to look at.
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
If you have other controls in the panel and the with of all controls exceed the with of the panel the controls that can not be displayed on the same row as the others will be placed on another row, under the visible ones, you might want to check for that.
|
|
|
|
|
First add your control in the Toolbox and than drag/drop your control to flowlayout panel
|
|
|
|
|
Good Day
i want to know how can i make in C# , OpenFileDialog then open image from this OpenFileDialog then can publish in my form .
Thank You
zidan
|
|
|
|
|
OpenFileDialog is just a class you create, it returns DialogResult.OK if the user presses OK. You can load a bitmap from the stream that is part of the dialog, or use the filename returned to open the image directly. You draw images on your form typcially with a picturebox. Do you have a C# book ?
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
openFileDialog1.Filter = "Images|*.jpg;*.gif;*.png|All files|*.*"; will display image files. You can use a PictureBox to display an image. There are tons of examples on Google.
Cheers,
Vikram.
The hands that help are holier than the lips that pray.
|
|
|
|
|
Hi all,
I have get a dataset with 5 column and populate it into datagridview. My question is, how can i hide the 1st column to prevent it to show in the datagridview. I am using dataset.Tables[0].Columns.("Index") to remove the "Index" column. It successful to populate what i want ,but the problem is when i save the dataset back to the database, it show me an error below:
InvalidOperationException was unhandled:
Missing the DataColumn 'PD_Program_Name' in the DataTable 'ProgramDetails' for the SourceColumn 'PD_Program_Name'.
I am guess that is because i already remove that column when populate datagridview.So ,is there any solution that can archieve it without remove a column in dataset?
thanks in advance
regards
coccon
|
|
|
|
|
Define the DataGrivViewColumns that you want to display instead of letting the system auto generate the columns for you.
And don't temper with the datasource. 
|
|
|
|
|
One way to do this.. is to just hide that column in the grid. so that in the back end it will be there but not visible to the user
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
