|
dotnetdev83 wrote: Dear .Net provide a hell lot easire classes for network programming and the graphics related work u want to do + you cant use Crypto Classes to encrypt ur messages to send and receive from the peers.
Yes, .NET provides fairly easy networking and graphics classes. But, easier than what?
What do you mean "you can't use crypto classes"? Why not? I don't have a problem with the crypto classes, unless going to or from the Compact .NET Framework because it has only a subset, so you have to work with the crypto classes available in the Compact .NET Framework if you are going to use that. Otherwise it has a good selection of classes that you can use to block encrypt or encrypt a stream.
ColinMackay.net
"Man who stand on hill with mouth open will wait long time for roast duck to drop in." -- Confucius
"If a man empties his purse into his head, no man can take it away from him, for an investment in knowledge pays the best interest." -- Joseph E. O'Donnell
|
|
|
|
|
Sorry Boss It was a typing mistake . I wanted to write you CAN use Crypto Classes. Sorry Again.
Best Regards,
|
|
|
|
|
C#/java would be faster and easier to do the implementation in, but from a security perspective both have the same weakness. The distributed programs are compiled to an intermediate format rather than machine language which is much easier to reverse engineer. IF your design is poor that could result in an easier attack path for cheaters. Provided you validate *everything* on the server (all user input is bad until proven otherwise), and don't send the user any data they can't currently see (out of sight areas of the map, private details of opponents) this shouldn't be a major issue. You should do both of these even if you're using c++, if the prizes are good enough the same cheating can be done by packet sniffing and writing a custom cheat client.
C# is my langauge of choice, but it's always a good thing to know the limitations before you begin.
|
|
|
|
|
Thanks for the advice all, I think I'm going to go ahead and write it in C#. 
|
|
|
|
|
Hello Gurus
I'm facing a problem that is pissing me off for hours. I have a simple serializeable class named Message1.
Here is the code for it.
[Serializable]<br> public class Message1<br> {<br> private string chatMessage;<br> private bool isPrivate;<br> private string sender;<br><br> public string ChatMessage<br> {<br> get<br> {<br> return chatMessage;<br> }<br> set<br> {<br> chatMessage = value;<br> }<br> }<br><br> public bool IsPrivate<br> {<br> get<br> {<br> return isPrivate;<br> }<br> set<br> {<br> isPrivate = value;<br> }<br> }<br><br> public string Sender<br> {<br> get<br> {<br> return sender;<br> }<br> set<br> {<br> sender = value;<br> }<br> }<br> <br> public Message1()<br> {<br> }
And 1 TcpListener and 1 TcpClient.
I want to encrypt the message field of Message1 Class and relay it on the network after serializing an object of Message1 using BinaryFormatter. It encrypts fine and serialization is also 100% ok. When i receive it on the server end and deserialize it and decrypt the message field. it gives me some wrong string.
Code for Server:
<br>listener = new TcpListener(IPAddress.Any, 9000);<br> listener.Start();<br> client = listener.AcceptTcpClient();<br> dataStream = client.GetStream();<br> msg = new Message1();<br> formatter = new BinaryFormatter();<br> msg = (Message1)formatter.Deserialize(dataStream);<br> string str = Chiper.Decrypt(msg.ChatMessage);<br> MessageBox.Show("Message : " + str + " Private : " + msg.IsPrivate.ToString() + " Sender : " + msg.Sender);<br> listener.Stop();<br>
Code for the Client:
<br> msg = new Message1();<br> msg.Sender = "Rizwan Ahmed";<br> msg.ChatMessage = Chiper.Encrypt("Hello how are you?");<br> msg.IsPrivate = true;<br> client = new TcpClient();<br> client.Connect(IPAddress.Parse("192.168.0.28"), 9000);<br> formatter = new BinaryFormatter();<br> formatter.Serialize(client.GetStream(), msg);<br> System.Threading.Thread.Sleep(1000);<br> client.Close();<br>
Output:
msg.ChatMessage : SGVsbG8gaG93IGFyZSB5b3U/AAAAAAAAAAAAAAAAAAA=
Please help me solving this matter I'll be really thankful to you. THanks alot in advance.
All is well without encryption or decryptionbr>Hint:Encrypted sting on the receiving end is same as the client sends after encryption but when i decrypt on the receiving end "Hello how are you?" becomes "SGVsbG8gaG93IGFyZSB5b3U/AAAAAAAAAAAAAAAAAAA=". What goes wrong on the network Please Help me. God bless you.
Rizwan
-- modified at 15:33 Friday 13th January, 2006
|
|
|
|
|
What exactly is Chiper? Custom class? Are your sure it is doing the right thing?
You should check it with something like this:
string msg = "Hello world!";
if (!msg.Equals(Chiper.Decrypt(Chiper.Encrypt(msg))))
MessageBox.Show("Chiper is not working correctly.");
Encrypt and Decrypt also seem to be static. Is there any password or something like this which is probably different on client and server side?
|
|
|
|
|
Sir Thanks alot for your interest.
I have figured out the solution. Yes Chiper is my own class all is working well. I just mistakenly converted the decrypted bytes into Base64 string as i do after Chiper.Encrypt() replacing return Convert.ToBase64String() to return Encoding.ASCII.GetString() in Chiper.Decrypt() method. It's working fine now thanks alot again.
Yeh that'sll be my help if you tell me whats the difference between Base64 string and the string one we get from Encoding.ASCII.GetString()??? and why it is needed in in the Encryption classes? Why Encoding.ASCII looses the information?? Thanks alot again Sir.
Best Regards,
Rizwan Ahmed
|
|
|
|
|
base64 is a binary encoding scheme for email attachments. The email protocalls are ancient and were written so long ago that the performance gained by using 7 bit bytes instead of 8bit bytes. Base 64 takes a series (7bytes?) of 8bit bytes and encodes them as series of 7 bit bytes (8bytes?) which are represented in modern hardware as 8 bit bytes with the high bit set to zero. It might also contain parity or ECC bits, I'm not overly familiar with it.
|
|
|
|
|
Helo.
I have to do a custom control which represents the wireless connections of a device. It looks like a listview, but it must be custom (it must look in a certain way, and its elements are pretty complicated). I also must implement a vertical scroll, in case the connections don't fit the window.
Anyway, I am not really sure of how to implement these things. How do I make the (custom) listview scrollable? I can't use the standard scrollbar because it also must match the look of the application.
Thanks
|
|
|
|
|
i posted a question about customize a scrollbar, and i get the advice to create one by alone!
Use 3 panels 1 for the up button, one for the scroller and one for the down button.
then place your own graphic inside.
Just a bit of code and you get your custom scrollbar.
If you have problem, just ask!
|
|
|
|
|
yeah, I thought of that, but how do I implement the custom listview such that only a portion of it is to appear on the screen? If I can do this well, the scroll bar thing will be pretty easy.
|
|
|
|
|
Being new to C# I have always wondered, how do people know the following:
Classes and there methods and what method is doing what?
For eg:
DataGridTextBoxColum > to achieve custom looks override the Paint method!
How do they know to do that? Is there a manual out there that I don't know about?
Or another good one:
//To invoke the method used when user double click on column to resize!
MethodInfo m = t.GetMethod("ColAutoResize", BindingFlags.Instance | BindingFlags.NonPublic);
How do you know that? Who tells a person to go and get the information from? I would love to know all that can some one here solve this mystry please??? thakns
|
|
|
|
|
Take this documentation + some experience + google and you're done
regards
modified 12-Sep-18 21:01pm.
|
|
|
|
|
There is no manual that explains all this stuff. It's just put together from A LOT of experience and research. A lot of the code you see is dictated by how Windows works, which is documented here[^]. When the Windows API was written, it was done with C++ in mind, not the .NET Framework. So all the code and examples in the Platform SDK will be written in C++. You have to translate the code into whatever language you're using.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Dave Kreskowiak wrote: So all the code and examples in the Platform SDK will be written in C++
Huh? If you need C# documentation MSDN has everything you need.
modified 12-Sep-18 21:01pm.
|
|
|
|
|
I think you mis-understood what I was talking about. The C# documentation DOESN'T cover the Windows internals like the Platform SDK does.
It covers stuff like, "to do this, write that". It doesn't cover why it works the way it does. For example, overriding WndProc. You can easily capture any and all window messages headed for your app and react to them, but the C# documentation doesn't go into what a window message is or how windows actually work.
RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome
|
|
|
|
|
Taurian110 wrote: How do they know to do that? Is there a manual out there that I don't know about?
My main source of information is reading articles, books[^], magazines (like MSDN Magazine[^], Software Development Magazine[^]), attending/organising user groups (Scottish Developers[^], Agile Scotland[^], eXtreme Wednesdays[^]), listening to DotNetRocks[^], and IT Conversations[^]
I hope I've not left anything out.
ColinMackay.net
"Man who stand on hill with mouth open will wait long time for roast duck to drop in." -- Confucius
"If a man empties his purse into his head, no man can take it away from him, for an investment in knowledge pays the best interest." -- Joseph E. O'Donnell
|
|
|
|
|
Another good resource are Reflector-like tools. If you don't understand what a special class does than you can just look into the code.
|
|
|
|
|
Hi,
When the print button is clicked, I save a snapshot of the screen to a bitmap file.
Graphics currentTab = this.CreateGraphics(); <br />
Size s = this.Size;<br />
Bitmap memoryImage = new Bitmap(s.Width - 10, s.Height - 36, currentTab);<br />
Graphics memoryGraphics = Graphics.FromImage(memoryImage);<br />
IntPtr dc1 = currentTab.GetHdc();<br />
IntPtr dc2 = memoryGraphics.GetHdc();<br />
BitBlt(dc2, 0, 0, this.ClientRectangle.Width, this.ClientRectangle.Height, dc1, 2, 2, 13369376);<br />
CurrentPage = memoryImage;<br />
currentTab.ReleaseHdc(dc1);<br />
memoryGraphics.ReleaseHdc(dc2);<br />
CurrentPage.Save("sCurrentPage.bmp",System.Drawing.Imaging.ImageFormat.Bmp);
Then I start to do the printing.
PrintDocument ppd = new PrintDocument(); <br />
PageSetupDialog pg = new PageSetupDialog();<br />
printDialog1.Document = ppd;<br />
pg.Document = ppd;<br />
pg.PageSettings.Landscape = true;<br />
DialogResult result = printDialog1.ShowDialog();<br />
if (result==DialogResult.OK)<br />
{<br />
ppd.PrintPage += new System.Drawing.Printing.PrintPageEventHandler(PrintCurrentPage);<br />
ppd.Print(); <br />
}<br />
ppd.Dispose();
The first time I print, everything works ok. But if I hit the button again, I get an error, and the current screen doesn't save. (An unhandled exception of type 'System.Runtime.InteropServices.ExternalException' occurred in system.drawing.dll Additional information: A generic error occurred in GDI+.)
If I comment out the printing part, the current page saves just fine. I also commented out just the line ppd.Print();. The image saved fine and I didn't get any error messages. Any thoughts?
Cheers,
Mel
|
|
|
|
|
Where is the function: 'BitBlt'? Is it a Win32 function or is it somewhere in the .Net Framework, or did you write it?
I get "system.drawing.dll Additional information: A generic error occurred in GDI+" in any application when I try to save a Bitmap to the same file more than once. Try changing the name of this file after every save.
Ex:
First time name would be "sCurrentPage0.bmp"
then "sCurrentPage1.bmp"
"sCurrentPage2.bmp"...
|
|
|
|
|
I've made an app that has a main screen. When the form loads, it looks for dlls in a subfolder, finds them gets their display names from a class function in them, adds them to the menu and displays the form in the dll for the menu item.
However, there are common functions that will need to be ran by the other forms in the separate dlls. I don't want to create a separate dll, I want them to use the code from the main form.
Should I send in a reference to the main form, and if so, how can I get the dll form to call the function in the main form? Or should I be trying to use a delegate?
As you can tell, I'm pretty new to C#. I know how to do this in C++, but I'm kinda confused in C#. So any help is appreciated. Don't mind dumbing it down for me.
My articles
BlackDice
|
|
|
|
|
nevermind. I got it. I just sent a reference to the form in and called InvokeMember().
My articles
BlackDice
|
|
|
|
|
Hi,
I am running sql server Dev. and visual web developer 2005. It seems that I can not create a local database using VWD 2005. Is this because I have to have sql server Express edition in order to be able to create a local database using the VWD 2005?
Thanks
|
|
|
|
|
In fact, you can use your current SQL server to create a local database.
|
|
|
|
|
Hi,
We have a win32 dll for communicating with the MSR device.
I have a c# class for calling the dll functions as follows.
<br />
public class MSRsTest<br />
{<br />
private int usbMode = 0;<br />
<br />
[MarshalAs(UnmanagedType.LPStr)]<br />
private StringBuilder szSerNumber = new StringBuilder(100,200);<br />
[MarshalAs(UnmanagedType.LPStr)]<br />
private StringBuilder szTrack1 = new StringBuilder(100,200);<br />
[MarshalAs(UnmanagedType.LPStr)]<br />
private StringBuilder szTrack2 = new StringBuilder(100,200);<br />
[MarshalAs(UnmanagedType.LPStr)]<br />
private StringBuilder szTrack3 = new StringBuilder(100,200);<br />
<br />
[DllImport( "ReadUSB_MSR_DLL.dll", CharSet = CharSet.Unicode )]<br />
public static extern int fnOpen_USB_MSR(int usbMode);<br />
<br />
[DllImport( "ReadUSB_MSR_DLL.dll", CharSet = CharSet.Unicode )]<br />
public static extern int fnReadUSB_MSR_Data(int usbMode,<br />
[MarshalAs(UnmanagedType.LPStr)] StringBuilder szTrack1,<br />
[MarshalAs(UnmanagedType.LPStr)] StringBuilder szTrack2,<br />
[MarshalAs(UnmanagedType.LPStr)] StringBuilder szTrack3);<br />
<br />
[DllImport( "ReadUSB_MSR_DLL.dll", CharSet = CharSet.Unicode )]<br />
public static extern int fnClose_USB_MSR();<br />
<br />
<br />
public MSRsTest(){}<br />
<br />
public void Do_HIDMSR_Test(System.Windows.Forms.TextBox Track1,<br />
System.Windows.Forms.TextBox Track2,<br />
System.Windows.Forms.TextBox Track3<br />
)<br />
{<br />
int iretn;<br />
usbMode = 1;<br />
try <br />
{<br />
iretn = fnOpen_USB_MSR(usbMode); <br />
<br />
<br />
iretn = 0;<br />
while(iretn == 0)<br />
{ <br />
iretn = fnReadUSB_MSR_Data(usbMode,szTrack1,szTrack2,szTrack3);<br />
}<br />
<br />
if(szTrack1.ToString().Length >= 22 && szTrack2.ToString().Length >= 22 &&<br />
szTrack3.ToString().Length >= 22)<br />
{<br />
Track1.Text = szTrack1.ToString(0,22);<br />
Track2.Text = szTrack2.ToString(0,22);<br />
Track3.Text = szTrack3.ToString(0,22);<br />
}<br />
else<br />
{<br />
Track1.Text = szTrack1.ToString();<br />
Track2.Text = szTrack2.ToString();<br />
Track3.Text = szTrack3.ToString();<br />
}<br />
<br />
szTrack1.Remove(0,szTrack1.Length);<br />
szTrack2.Remove(0,szTrack2.Length);<br />
szTrack3.Remove(0,szTrack3.Length);<br />
<br />
iretn = 0;<br />
iretn = fnClose_USB_MSR();<br />
<br />
}<br />
catch(Exception){}<br />
}<br />
I call this class from my MSRform
as
MSRsTest TestMSR = new MSRsTest(); <br />
else if(MSR_type == "USBHIDMSR")<br />
{<br />
this.Statuslabel.Text = "USB HID MSR: Swipe Card";<br />
this.Statuslabel.Refresh();<br />
TestMSR.Do_HIDMSR_Test(this.Track1TB,this.Track2TB,this.Track3TB);<br />
}
every thing works fine. The MSR returns backs the correct value for the first time. But after navigating to some other forms, if I come to the MSRform again and do the procedure the values read from the card ie. the dll gets junk values form the card.
But in the first time itself if I do a for loop inside else if(MSR_type == "USBHIDMSR") then the MSR reads correct values no matter how many times I do inside the loop.
What's the problem...I am missing to do something but could'nt figure out...pls help.
Thanks.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
