|
I know my level of english poor people understand. please help me solve the problem. thank you very much.
|
|
|
|
|
|
First of all, good luck with your article in the competition. Secondly, the CP staff tend not to frequent this forum. You'd be better off posting it here[^]. Third, providing the votes weren't all coming from the same IP address (i.e. people were voting from home) then I doubt that Chris and co would have a problem with this; if they all come from the same IP address then the voting might be viewed as suspicious, especially if they are all new members.
"WPF has many lovers. It's a veritable porn star!" - Josh Smith As Braveheart once said, "You can take our freedom but you'll never take our Hobnobs!" - Martin Hughes.
My blog | My articles | MoXAML PowerToys | Onyx
|
|
|
|
|
Thanks for the reply, and thank you for the support  I was a little shocked to see it getting nominated as I always looked up to the CodeProject members as Programming gods. Always a little nervous about if it was good enough so this has been great for me so far! I deleted the message and posted it over at the Site board now.
|
|
|
|
|
|
They already informed me of this on my other message on the Site / Bugs & Suggestions forum. It will not happen again 
|
|
|
|
|
I have a service reference .svc written in c# .net v3.5 and I want to view the SOAP request/response message.
Is it possible?
Thanks
|
|
|
|
|
If you want to see the wsdl, type in your service uri follow by ?wsdl in your browser.
If you want to actually view the data going across the wire, use a tool like fiddler.
|
|
|
|
|
access the events of class using its object. how to do this?
|
|
|
|
|
MyClass myClassInstance = new MyClass();
myClassInstance.EventName += new EventHandler(MethodToHandleTheEvent);
...
private void MethodToHandleTheEvent(object sender, EventArgs e)
{
... handle the event
}
I have learnt that you can not make someone love you, all you can do is stalk them and hope they panic and give in.
Apathy Error: Don't bother striking any key.
|
|
|
|
|
ur codez not compile. plz fix asap. u not gr8! 
Luc Pattyn [Forum Guidelines] [Why QA sucks] [My Articles]
I only read formatted code with indentation, so please use PRE tags for code snippets.
I'm not participating in frackin' Q&A, so if you want my opinion, ask away in a real forum (or on my profile page).
|
|
|
|
|
You should upgrade to VS2012 - .NET 5.0 has full support for the ellipsis automatic code generation command "..."
I have learnt that you can not make someone love you, all you can do is stalk them and hope they panic and give in.
Apathy Error: Don't bother striking any key.
|
|
|
|
|
Hi
I am having button on form in C#. It does take 2-3 seconds to complete the operation meanwhile the button is disabled. But if the user clicks on that button when it is disabled, after completion of first operation it will again try to execute the handler again. how should I avoid the execution of event handler when the button is disabled?
here is the code snippet:
public partial class Form1 : Form
{
int i = 0;
public Form1()
{
InitializeComponent();
}
private void button1_Click(object sender, EventArgs e)
{
this.button1.Enabled = false;
System.Threading.Thread.Sleep(3000);
i++;
this.label1.Text = "Total Calls: " + i.ToString();
this.button1.Enabled = true;
}
}
when the button is disabled and you click on it, you can see the count gets increased.
Please help
|
|
|
|
|
You can unbind the click event at the
time of disabling the button.
Try following code..
button1.Click -= new System.EventHandler(this.button1_Click);
And you can rebind the click even on making it enable.
button1.Click += new System.EventHandler(this.button1_Click);
Hope this will help!
Jinal Desai - LIVE
Experience is mother of sage....
|
|
|
|
|
Tried but no success still the same behavior
The event handler now looks like this:
private void button1_Click(object sender, EventArgs e)
{
this.button1.Enabled = false;
this.button1.Click -= new System.EventHandler(this.button1_Click);
System.Threading.Thread.Sleep(3000);
i++;
this.label1.Text = "Total Calls: " + i.ToString();
this.button1.Enabled = true;
this.button1.Click += new System.EventHandler(this.button1_Click);
}
still count is increasing if I click disabled button
|
|
|
|
|
Add an if ( this.button1.Enabled ) ?
|
|
|
|
|
Tried that also. The problem is that the event handler is getting called after first execution and at the end of it I am setting this.button1.Enabled = true;
so this is not going to solve my problem..
|
|
|
|
|
Are you only clicking the button once?
Have you attached the handler more than once?
|
|
|
|
|
I have not attached the handler more than once.
After first click the button is disabled for 3 seconds when I click on the disabled button somewhere it is queuing that event and after execution of first event handler it is calling that event handler again that I don't want as I clicked on disabled button.
I don't know how to attach the file here. PM provide me your email id I'll send you the test application I created to reproduce the problem.
|
|
|
|
|
Hi,
it does not work like that. Those Enabled changes will take effect only after your handler finishes, and putting a Thread.Sleep in a handler is a big no no. A handler should never last more than some 10 milliseconds, your app's GUI should remain responsive at all times. What you need is either another thread (assuming the Sleep is emulating some real action), or a timer (assuming you really just want a delay).
For timers, your best bet would be a System.Windows.Forms.Timer; you disable the button and launch the timer inside the button click handler, then re-enable the button and stop the timer inside the timer's tick handler. Works like a charm, without blocking anything but the button itself.
Luc Pattyn [Forum Guidelines] [Why QA sucks] [My Articles]
I only read formatted code with indentation, so please use PRE tags for code snippets.
I'm not participating in frackin' Q&A, so if you want my opinion, ask away in a real forum (or on my profile page).
|
|
|
|
|
Luc Pattyn wrote: Those Enabled changes will take effect only after your handler finishes
Does this only apply to the Enabled property of controls, or others as well, and why wait until the handler completes? I've been seeing a different behavior for something like the ComobBox.SelectedIndex property. I have an app that, when you click a button, sets some ComboBox selections, does some processing, and maybe changes the ComboBox selection again (to indicate to the user that something is actually going on). This is all happenning in a function called by my button handler on the GUI thread, and I see the ComboBox values update while it runs.
Yes, I know the fact that such a long procedure occurs in the click handler isn't the best solution (it was fine with the original program design, but we're in the process of moving this all out to a separate thread).
Thanks,
Dybs
The shout of progress is not "Eureka!" it's "Strange... that's not what i expected". - peterchen
|
|
|
|
|
dybs wrote: Does this only apply to the Enabled property of controls
I don't know; I don;t think it is documented, and I don't need to know as I keep my handlers short.
Luc Pattyn [Forum Guidelines] [Why QA sucks] [My Articles]
I only read formatted code with indentation, so please use PRE tags for code snippets.
I'm not participating in frackin' Q&A, so if you want my opinion, ask away in a real forum (or on my profile page).
|
|
|
|
|
How about using a flag in order to suppres the event?
private bool suppresEvent = false;
private void button1_Click(object sender, EventArgs e)
{
if(suppresEvent)
return;
suppresEvent = true;
System.Threading.Thread.Sleep(3000);
suppresEvent = false;
}
I have no smart signature yet...
|
|
|
|
|
Please, i am working on my BSc Degree project. I need a code snippet that will query the server/connection to my ISP provider to determine if my bandwidth subscription is exactly what i requested. for example, if i subscribed to 100MB, i want to be sure its 100MB before i start consuming the bandwidth at all. else if the bandwidth is less than 100MB, then i can complain to them to make necessary adjustment.
I need your advice or help on this. thanks.
modified on Wednesday, May 12, 2010 5:37 AM
|
|
|
|
|
Never post your email address in any forum, unless you really like spam! If anyone replies to you, you will receive an email (like this one) to let you know.
Edit it, and remove your address.
I have learnt that you can not make someone love you, all you can do is stalk them and hope they panic and give in.
Apathy Error: Don't bother striking any key.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
