|
mark4 wrote: First, I'm not using VBScript but VBA
Does not matter. You have the same limitations.
mark4 wrote: Second, it's not so easy, my C# method must return a binary tree.
OK, so you're going to have to represent your binary tree in a format that's more portable acrossed COM.
|
|
|
|
|
That's right, so my question is: how to do it? I've gone thru several tutorials but I find them very difficult and they are too specific to an example. Do I need to create an interface? How do I generate GUIDs? Well, I have many questions... If you know a good and simple tutorial, if would help me.
|
|
|
|
|
I don't know of any "simple" tutorials on this.
One design I would look at is a class in C# that manages the view of the tree that your VBA code sees. Basically giving the VBA code methods it can use to nagivate the tree and return the values contained in a specific node in the tree. Returning the entire tree is just silly.
|
|
|
|
|
Hi.
I am getting the following error:
Object reference not set to an instance of an object.
here is my code:
private StringBuilder data_changed = new StringBuilder();
.....
.....
if (full_name != txtFullName.Text) data_changed.Append(String.Format(" - name: {0} -> {1}", full_name, txtFullName.Text)).AppendLine();
|
|
|
|
|
Put a break point on your if statement and examine the data you're working with when it's hit.
My guess is full_name is probably null...
|
|
|
|
|
|
This error occurs when you try and access a property of an object that is already null.
Debug and figure out which of the values is throwing this error.
|
|
|
|
|
This is probably the easiest of all .Net exceptions to debug. One of the things you're trying to reference is null. On that line you have only txtFullName and data_changed being dereferenced, so it must be one of those. Work out which one it is and either change the calling context or null-protect this code.
|
|
|
|
|
i found the problem. there was a:
data_changed = null;
I removed it and code is working fine.
Thanks everyone
|
|
|
|
|
I have a question about how to obtain the results from a web service
Basically I have received a C# console application code that calls a remote webservice and consumes the results. The console application runs by giving it commands to know what method in the web service to call.
Now I am going to write a C# 2010 service application that will call the C# 2008 console and run the commands in a specificed order.
Basically the steps would be:
1. write the new .net app to make callls in a sequential order to a console app progrm.
2. The console application calls the web service and obtains the results,
3. The new .net app obtains the results of the web service from the console application it called.
Let me know how I can accomplish my goal with code and/or references.
|
|
|
|
|
Why don't you directly consume the web service in the new application? That would be the easiest to do.
|
|
|
|
|
I do not want to change the console application that was written by the contract shop unless I need to for the following reasons:
1. There are alot of edits in the *.xsd that was written by the contract shop. I do not know how to tell how these edits are tied to the application. is there a way that I can tell how the edits are tied to the console application?
2. It is extremely hard to get ahold of the contract shop and to ask them questions. The customer that pays both of us, is in charge of how we communicate with this contract shop. There is alot of red tape to ask the contract shop any question.
|
|
|
|
|
How did you plan on sending "commands" to a console-app?
dcof wrote: Let me know how I can accomplish my goal with code and/or references.
Aight.. easiest way would be to have the "commands" in a separate text-file. Makes it easy to modify, and you can loop the lines easily after reading all text.
The loop could use a Console.ReadLine to get a command (read it from the file later), use a switch to see what should be done, print the results to the console.
What type of command? Can you give an example with three commands? Do they have parameters?
Bastard Programmer from Hell 
if you can't read my code, try converting it here[^]
|
|
|
|
|
Right now I can entering the values in a command window and clicking on the command to execute the code. In the new .net application, I plan on running these commands based on the sequence of commands the application is setup to run.
The commands do have paramters. The parameters are the location of the webservice followed by the type of command that needs to be executed.
|
|
|
|
|
You have talked around this app several times over the last few days. It's obvious that you can't do what you're trying to do, which should tell you that your architecture is wrong. Why aren't you directly consuming the service?
|
|
|
|
|
You should consume the Service directly or the "app" should be an API instead. In fact, why not explore the contents of the "app" to see what public methods are available.
Or see if this ProcessCommunicator[^] will help.
modified 2-Sep-12 12:37pm.
|
|
|
|
|
Can you explain why I would want to do the process communication? I do not currently understand how this would help me.
|
|
|
|
|
dcof wrote: Basically I have received a C# console application code that calls a remote webservice and consumes the results.
If and only if this really is a console application then the following is true.
- Input is ONLY via files and/or stdin.
- Output is ONLY via files and/or stdout/stderr.
If that is true then you write a management control API using System.Diagnostics.Process.
That class specifically provides the following functionality.
- A way to start/stop/manage an application (any application)
- Access to stdin/stdout/stderr
You can google for example on how to use Process however the specifics of writing your API depends on you understanding how the console app works.
If you application is not in fact an actual console application, then if it was me, I would look at AutoIt. There are probably others like this but I have had success with this tool a number of times so I look to it first.
http://www.autoitscript.com/site/[^]
|
|
|
|
|
The following is true about the console application:
- Input is ONLY via files and/or stdin.
- Output is ONLY via files and/or stdout/stderr.
When I run a command it always starts with 'start' statement followed by the execution path and a couple of parameter values.
This can you tell me and/or point me to a reference on using the 'process' as you stated in your last response. Is there a way that I can use the process class as part of my way of calling the console application? If so, how would I call the console application using the process class?
|
|
|
|
|
dcof wrote: Is there a way that I can use the process class as part of my way of calling
the console application?
Probably.
dcof wrote: how would I call the console application using the process class?
Read the documentation. Give it the path to the executable and any parameters. You can redirect the input and output streams as necessary.
|
|
|
|
|
|
Hi Can you help on those queries which is provided on the blog. www.dotnet-discussion.blogspot.com
Thanks
Sudha
|
|
|
|
|
Repost of same question you asked two questions before this one in this forum ?
"If you shoot at mimes, should you use a silencer ?" Stephen Wright
|
|
|
|
|
Guys i wanna find tan^-1(0.666666667) which is equals to 33.69 degres.....
But when i use the Atan(0.66666667) i get 0.588...
Now i wanna knwo what is it that i'm doing wrong here... or the method is not doing what is meant to do?..
Thanks in advance
modified 2-Sep-12 3:35am.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
