|
Familiarize yourself with the "patterns" used to access resources; to satisfy yourself that your searches are hiiting the "right things" ... e.g. "$this.Icon" is the "key" of the "resource" is this case:
this.Icon = ((System.Drawing.Icon)(resources.GetObject("$this.Icon")));
"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal
|
|
|
|
|
Well, i use this "pattern" for my global resources and there i have no problems. What i am specifically pointing to is the resource files generated for each usercontrol as soon as you set the control to localizable true. And after doing that there was a lot of useless (as mentioned before like docking position) stuff autogenerated into the resource file instead of still being in the designer class.
But since i was not sure how to handle this, because the designer sets the resources according to the culture of the system or the one in which i start up the app during initialization of the usercontrol, i asked wether it is possible to remove those lines from the res files back to the designer without destroying the layout of the usercontrol.
So i would actually never find a "hit" since all the initialization in the designer.cs does this ->
this._lbBegin.BackgroundStyle.CornerType = DevComponents.DotNetBar.eCornerType.Square;
resources.ApplyResources(this._lbBegin, "_lbBegin");
this._lbBegin.Name = "_lbBegin";
So it feels like either we both are talking past each other or i stand on the tube 
Rules for the FOSW ![ ^]
if(this.signature != "")
{
MessageBox.Show("This is my signature: " + Environment.NewLine + signature);
}
else
{
MessageBox.Show("404-Signature not found");
}
|
|
|
|
|
|
Okay 
Thanks a lot for your patience with me and helping me out.
I'll close the question now.
Rules for the FOSW ![ ^]
if(this.signature != "")
{
MessageBox.Show("This is my signature: " + Environment.NewLine + signature);
}
else
{
MessageBox.Show("404-Signature not found");
}
|
|
|
|
|
No problem! There are many ways to do something in .NET. It all depends on what you want to accomplish in the long run.
"(I) am amazed to see myself here rather than there ... now rather than then".
― Blaise Pascal
|
|
|
|
|
Hello
I define a HtppWebRequest ending with the following lines :
...
req.Credentials = new NetworkCredential(...);
Stream theStream = req.GetRequestStream();
theStream.Write(bytes, 0, bytes.Length);
theStream.Close();
req.GetResponse();
Then, the request is sent twice. A first time with the theStream.Write line, and a second one with the req.GetResponse() line. I have a 401 (unauthorized) response with the first request and a 403 (forbidden) with the second one.
I Wonder if the 403 error is due to the previous 401.
In any case, I would not to send the first request.
Thanks for your help
|
|
|
|
|
You only need to use the stream if you have parameter data to be written to the URL.
req.Credentials = new NetworkCredential(...);
req.GetResponse();
Will do the trick.
|
|
|
|
|
No, the GetResponse is not enough because I have data to write into the request. I don't know how to send data without the GetRequestStream.
|
|
|
|
|
Apologise, put my reading glasses on..
|
|
|
|
|
Sounds like a typical authentication challenge - the request doesn't send the credentials unless the server indicates that it needs to.
Try setting the PreAuthenticate property[^] to true:
req.Credentials = new NetworkCredential(...);
req.PreAuthenticate = true;
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Thanks for your idea, but it doesn't work  .
I have the same behavior : a 401 error followed by a 403.
|
|
|
|
|
I've just solved my problem. Le number of - characters was not good on the boundary line.
|
|
|
|
|
Hi experts ,
we are using this code to read xml file, we want to optimize the code .
Issue is that in our xml file around 50 attributes are there , but from that we want hardly 2 to 3 attributes value.
but here while loop is executing 50 times , that we don't want.
Please give suggestion .
Thanks
using (XmlReader reader = XmlReader.Create(@"C:\abc.xml"))
{
while (reader.Read() )
{
if (reader.IsStartElement("AccountNumber"))
{
listBox1.Items.Add(reader.ReadString());
}
else if ((reader.IsStartElement("AvailableDate")))
{
listBox1.Items.Add(reader.ReadString());
}
}
}
|
|
|
|
|
Rather than adding data to the ListBox directly inside your loop, add this data to a List<string>. Once you have exited the loop, use AddRange to add it to the ListBox.
This space for rent
|
|
|
|
|
Hello,
this might not be a real question, more like an interest about, how bad my current workaround is. I hope it's OK to post here .
I have an application which I have started developing for WPF and now I also want to port it to UWP. I have created some custom visual controls for the app in a Controls library, which is a Class Library in C# and references .Net WPF libraries.
Some custom panels would look very similar with code working in both frameworks, so I thought it would be nice to reuse my old code.
This is the solution I came up and currently porting the library to:
- left the original Controls class library project untouched
- created a Controls.UWP class library for UWP platform
- added source files from Controls to Controls.UWP as linked files
- finally - and currently working on - resolving the namespace changes by adding stuff like this at the beginning of source files:
#if WINDOWS_UWP
using Windows.Foundation;
#else
using System.Windows;
#endif
However, in some cases I must completely rewrite the class eg. because I used OnRender function to draw it, so now I have to rewrite it to use Win2D. For this reason I don't know if it's worth bother with #if statements.
What do you think, is this a bad idea?
|
|
|
|
|
How I would tend to do this is put common code inside a PCL which can be used by both sides. Then all you have to do is write your platform specific code and call the shared functionality.
This space for rent
|
|
|
|
|
Thank you for the reply! Then I guess, I wanted to create a monster with platform specific code (the UI controls) for two frameworks in common source files.
I have already used PCL, that's why I thought it would be nice to have something similar for UI, too.
Also, since my post I found other issues, like the missing FrameworkPropertyMetadata from UWP and more restricted attached property accessors. So, it seems, that I couldn't save anyway as much code-rewriting as I wanted .
|
|
|
|
|
The biggest problem you will face is that, despite appearances, WPF and UWA are two vastly different beasts. Universal Windows programs are a lot closer to Silverlight, so there are things that you can do in WPF that just aren't available in WPF (and vice versa). This would have a fundamental impact on things such as what your XAML does, which would be a major pain to work around.
This space for rent
|
|
|
|
|
Wrong post.Deleted.
modified 19-Jan-21 21:04pm.
|
|
|
|
|
Please do not repost, especially with just a link to the other forum.
|
|
|
|
|
Ok, I will remove it.
[Edit]
BTW neither the comment nor the downvote helped me to solve the Problem. Next time don't mark something like that as an answer 
modified 19-Jan-21 21:04pm.
|
|
|
|
|
Morning all.
Using C# is there a way to set the "Maximum Worker Processes" value in IIS?
<a href="http://i.imgur.com/xvfaJP6.png">
Currently we set this value manually in each server and it would be productive to be automated.
Thanks,
|
|
|
|
|
If you reference Microsoft.Web.Administration in your project, look at the ApplicationPoolProcessModel.MaxProcess property.
This space for rent
|
|
|
|
|
I wish u solve this problem
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
